I need help with backup x10 - GSM-Forum

COVVA · 07-02-2011, 21:52

Hi .. i want read fullnandflash with roffbox to x10a. I connect jtag pinout but..

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [QSD8XXX L41 D04]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA000E1 - IGNORED!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: Read/Write memory failed during H/W Init.

without battery:
------------------------------------------------------------------------

With battery put show:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [QSD8XXX L41 D04]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA000E1 - IGNORED!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x44): Communication is not established. Terminating.

Thanks for you helps...Its possible make fullbackup x10 a with Riff thanks??

Boshko_Alfa · 07-02-2011, 22:00

Read sticky thread, u can find solution how to make full backup.

hackgsm · 07-02-2011, 23:26

no possible ...to make backup without dll ......mr legija have solution

littmanr · 07-05-2011, 01:47

Mr. Legija

Please post x10.dll

BR

hackgsm · 07-05-2011, 02:45

Quote:

Originally Posted by littmanr

Mr. Legija

Please post x10.dll

BR

in your dream .........

littmanr · 07-05-2011, 03:51

So not necessary free!!!

cp-point · 07-20-2011, 11:02

hello can i have the jtag pinout ? i need it so much ....

mobile. · 07-21-2011, 11:04

It would be nice to have the .dll

sent from my xxx using tapatalk

littmanr · 07-22-2011, 04:45

Quote:

Originally Posted by cp-point

hello can i have the jtag pinout ? i need it so much ....

try....

07-02-2011, 21:52	#1 (permalink)
COVVA Cheater -Don't Deal with him- Join Date: May 2005 Location: Colombia Posts: 660 Member: 142645 Status: Offline Sonork: 100.1604204 Thanks Meter: 239	I need help with backup x10 Hi .. i want read fullnandflash with roffbox to x10a. I connect jtag pinout but.. Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.25, JTAG Manager Version: 1.33 Selected Resurrector: [QSD8XXX L41 D04] Connecting to the dead body...OK Detected dead body ID: 0x1BA000E1 - IGNORED! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...FAILED ERROR: Read/Write memory failed during H/W Init. without battery: ------------------------------------------------------------------------ With battery put show: Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.25, JTAG Manager Version: 1.33 Selected Resurrector: [QSD8XXX L41 D04] Connecting to the dead body...OK Detected dead body ID: 0x1BA000E1 - IGNORED! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...FAILED ERROR(0x44): Communication is not established. Terminating. Thanks for you helps...Its possible make fullbackup x10 a with Riff thanks??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
need eeprom photo????	mobileinfo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	05-26-1999 11:35

07-02-2011, 22:00	#2 (permalink)
Boshko_Alfa No Life Poster Join Date: Mar 2007 Location: Skopje, Macedonia Age: 36 Posts: 4,244 Member: 472933 Status: Offline Sonork: 100.1590967 Thanks Meter: 1,331	Read sticky thread, u can find solution how to make full backup.

07-02-2011, 23:26	#3 (permalink)
hackgsm Freak Poster Join Date: Apr 2004 Location: RIFF BOX Age: 45 Posts: 484 Member: 64014 Status: Offline Sonork: 100.1603152 Thanks Meter: 255	no possible ...to make backup without dll ......mr legija have solution

07-05-2011, 01:47	#4 (permalink)
littmanr No Life Poster Join Date: Oct 2005 Posts: 668 Member: 190377 Status: Offline Thanks Meter: 61	Mr. Legija Please post x10.dll BR

07-05-2011, 03:51	#6 (permalink)
littmanr No Life Poster Join Date: Oct 2005 Posts: 668 Member: 190377 Status: Offline Thanks Meter: 61	So not necessary free!!!

07-20-2011, 11:02	#7 (permalink)
cp-point Registered User Join Date: Apr 2005 Age: 42 Posts: 137 Member: 133028 Status: Offline Thanks Meter: 5	hello can i have the jtag pinout ? i need it so much ....

07-21-2011, 11:04	#8 (permalink)
mobile. Freak Poster Join Date: Nov 2010 Location: UK Posts: 449 Member: 1454100 Status: Offline Thanks Meter: 28	It would be nice to have the .dll sent from my xxx using tapatalk