inspire 4g A9192 - GSM-Forum

atv · 11-13-2012, 03:32

hi i just repaired i an htc a9192, after repair hard reset and then PD98IMG.zip, all ok but now phone has no signal, how can i fix it, i believe is not hardware
thank you
[11/12/2012 11:39:20 AM] [START OPERATION_ID = RESURRECT]
[11/12/2012 11:39:22 AM] Open serial port...OK
[11/12/2012 11:39:22 AM] Connecting to the RIFF Box...OK
[11/12/2012 11:39:22 AM] Firmware Version: 1.33, JTAG Manager Version: 1.44
[11/12/2012 11:39:22 AM] Selected Resurrector: [HTC Inspire via USB V1.0.4501.57655]
[11/12/2012 11:39:22 AM]
[11/12/2012 11:39:22 AM] Looking for the HS-USB QDLoader Interface...ERROR
[11/12/2012 11:39:22 AM] ERROR: Cannot Find Qualcomm HS-USB QDLoader Interface COM Port
[11/12/2012 11:39:22 AM] [FINISH OPERATION_ID = RESURRECT]

[11/12/2012 11:40:08 AM] [START OPERATION_ID = RESURRECT]
[11/12/2012 11:42:48 AM] Open serial port...OK
[11/12/2012 11:42:48 AM] Connecting to the RIFF Box...OK
[11/12/2012 11:42:48 AM] Firmware Version: 1.33, JTAG Manager Version: 1.44
[11/12/2012 11:42:48 AM] Selected Resurrector: [HTC Inspire via USB V1.0.4501.57655]
[11/12/2012 11:42:48 AM]
[11/12/2012 11:42:48 AM] Looking for the HS-USB QDLoader Interface...OK
[11/12/2012 11:42:48 AM] Open the HS-USB QDLoader Interface Port...OK
[11/12/2012 11:42:48 AM]
[11/12/2012 11:42:48 AM] Establish connection with the Device...OK
[11/12/2012 11:42:48 AM] Uploading resurrector data into memory...OK
[11/12/2012 11:42:48 AM] Starting communication with resurrector...OK
[11/12/2012 11:42:48 AM]
[11/12/2012 11:42:48 AM] Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x00008B000000 Bytes = 2.17 GB)
[11/12/2012 11:42:48 AM]
[11/12/2012 11:42:48 AM] Flashing the dead body...OK
[11/12/2012 11:42:48 AM] Resurrection complete!
[11/12/2012 11:42:48 AM] [FINISH OPERATION_ID = RESURRECT]

[11/12/2012 11:43:30 AM] [START OPERATION_ID = RESURRECT]
[11/12/2012 11:43:46 AM] Open serial port...OK
[11/12/2012 11:43:46 AM] Connecting to the RIFF Box...OK
[11/12/2012 11:43:46 AM] Firmware Version: 1.33, JTAG Manager Version: 1.44
[11/12/2012 11:43:46 AM] Selected Resurrector: [HTC Inspire via USB V1.0.4501.57655]
[11/12/2012 11:43:46 AM]
[11/12/2012 11:43:46 AM] Looking for the HS-USB QDLoader Interface...OK
[11/12/2012 11:43:46 AM] Open the HS-USB QDLoader Interface Port...OK
[11/12/2012 11:43:46 AM]
[11/12/2012 11:43:46 AM] Establish connection with the Device...OK
[11/12/2012 11:43:46 AM] Uploading resurrector data into memory...OK
[11/12/2012 11:43:46 AM] Starting communication with resurrector...OK
[11/12/2012 11:43:46 AM]
[11/12/2012 11:43:46 AM] Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x00008B000000 Bytes = 2.17 GB)
[11/12/2012 11:43:46 AM]
[11/12/2012 11:43:46 AM] Unlocking the Phone...OK
[11/12/2012 11:43:46 AM] Unlock complete!
[11/12/2012 11:43:46 AM] [FINISH OPERATION_ID = RESURRECT]

[11/12/2012 12:08:03 PM] ------------------------------- JTAG Manager Session Closed -------------------------------

[11/12/2012 12:19:56 PM] ------------------------------- JTAG Manager Session Opened -------------------------------
[11/12/2012 12:19:56 PM] JTAG Manger Version: 1.44
[11/12/2012 12:19:56 PM] -------------------------------------------------------------------------------------------

[11/12/2012 12:20:02 PM] [START OPERATION_ID = RESURRECT]
[11/12/2012 12:25:18 PM] Open serial port...OK
[11/12/2012 12:25:18 PM] Connecting to the RIFF Box...OK
[11/12/2012 12:25:18 PM] Firmware Version: 1.33, JTAG Manager Version: 1.44
[11/12/2012 12:25:18 PM] Selected Resurrector: [HTC Inspire via USB V1.0.4501.57655]
[11/12/2012 12:25:18 PM]
[11/12/2012 12:25:18 PM] Looking for the HS-USB QDLoader Interface...OK
[11/12/2012 12:25:18 PM] Open the HS-USB QDLoader Interface Port...OK
[11/12/2012 12:25:18 PM]
[11/12/2012 12:25:18 PM] Establish connection with the Device...OK
[11/12/2012 12:25:18 PM] Uploading resurrector data into memory...OK
[11/12/2012 12:25:18 PM] Starting communication with resurrector...OK
[11/12/2012 12:25:18 PM]
[11/12/2012 12:25:18 PM] Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x00008B000000 Bytes = 2.17 GB)
[11/12/2012 12:25:18 PM]
[11/12/2012 12:25:18 PM] Flashing the dead body...OK
[11/12/2012 12:25:18 PM] Resurrection complete!
[11/12/2012 12:25:18 PM] [FINISH OPERATION_ID = RESURRECT]

BABAK NURI · 11-13-2012, 23:33

Hi
Yes,This is not HW...
You need dump file for A9192
---
Open eMMC Plugin
Open Dump File
Press "Make Partition From File"
Select Partition 13 "P4B"
Press "Write Selected"
-----
Or Write Dump file Via "DCC Read\Write" Page
256MB is Good

Thatch · 11-28-2012, 03:20

Hi Mr, can u pls help me unlock my phone, here's the info:
Model: HTC Inspire 4G
Operator: AT&T
EMEI: 358920042484771
Pls let me know, thanks! Best regards-

atv · 11-28-2012, 06:10

thatch, if as i assume you have riffbox, and already used it before (if not purchase the att htc unlock code, or better the riff box),

first search
a9192 disassembly

second
if disassembly went fine, see and locate

third
as always assuming you own riff box and used it before, you know, how to choose htc and the model, connect the phone pcb as instructed by soft. you may have to repeat the connection 2 times for the usb dll dcc drivers to install
and then, if all ok you will see this
http://img231.imageshack.us/img231/8...m018eudvh9.jpg

'just' go to the 'unlock page', and unlock, that's it

as well it could be good for you to read
RIFF HTC via USB cable support - Important information !
http://forum.gsmhosting.com/vbb/f634...ation-1464870/

if all of the steps above, don't apply for you. just purchase the code
atv

Thatch · 11-29-2012, 01:49

Hi atv,
Thanks a lot, really appreciate it. Good luck to me.

lol

atv · 12-05-2012, 07:55

steps to follow, to repair it properly, as i think?
1.- connect as usb with tp to resurrect
2.- in resurector settings,
fix hboot,
repair custom cid
repair imei
and repair htc partition
3.- in DCC Read\Write, write 'read flash htc inspire4g locked 256mb 233.bin' like this ????????????
- Switch to "DCC Read/Write" TAB
- Select "Access ROM1 Address Space"
- Check "Auto Fullflash size"
- In field open read flash htc inspire4g locked 256mb 233.bin
- Check "Image Files use Used"
- Check "Use Address as Offset for Flash Files"
- Click "Write Flash"
then???
***4.- go again to resurector and only unlock (but i believe it resurrects again, to unlock?
Hi
i mean no try resurrect after write 256mb......only flash with RUU
This is conflict after try repair imei or write h.boot

latest Ruu and latest H.Boot)***
or unlock after latest ruu?,
or better get the code to not disassemble again if it has to be unlocked after ruu?
and then flash the latest full ruu with hboot.
and then phone ok, latest version, custom cid, unlocked and full signal, am i correct

atv

atv · 12-23-2012, 23:29

hi, happy hollidays, could you be so kind to explain and correct the procedure i just asked please, just to be clear in the procedure, process, steps in the inspire 4g.
thank you
atv

BABAK NURI · 12-25-2012, 08:56

Can you tell me what is exactly you want?
repair no signal or unlock ?

11-28-2012, 06:10	#4 (permalink)
atv Freak Poster Join Date: Jan 2005 Location: N/A Posts: 282 Member: 109335 Status: Offline Thanks Meter: 27	hi thatch thatch, if as i assume you have riffbox, and already used it before (if not purchase the att htc unlock code, or better the riff box), first search a9192 disassembly second if disassembly went fine, see and locate third as always assuming you own riff box and used it before, you know, how to choose htc and the model, connect the phone pcb as instructed by soft. you may have to repeat the connection 2 times for the usb dll dcc drivers to install and then, if all ok you will see this http://img231.imageshack.us/img231/8...m018eudvh9.jpg 'just' go to the 'unlock page', and unlock, that's it as well it could be good for you to read RIFF HTC via USB cable support - Important information ! http://forum.gsmhosting.com/vbb/f634...ation-1464870/ if all of the steps above, don't apply for you. just purchase the code atv

12-05-2012, 07:55	#6 (permalink)
atv Freak Poster Join Date: Jan 2005 Location: N/A Posts: 282 Member: 109335 Status: Offline Thanks Meter: 27	hi just to recap steps to follow, to repair it properly, as i think? 1.- connect as usb with tp to resurrect 2.- in resurector settings, fix hboot, repair custom cid repair imei and repair htc partition 3.- in DCC Read\Write, write 'read flash htc inspire4g locked 256mb 233.bin' like this ???????????? - Switch to "DCC Read/Write" TAB - Select "Access ROM1 Address Space" - Check "Auto Fullflash size" - In field open read flash htc inspire4g locked 256mb 233.bin - Check "Image Files use Used" - Check "Use Address as Offset for Flash Files" - Click "Write Flash" then??? *4.- go again to resurector and only unlock (but i believe it resurrects again, to unlock? Hi i mean no try resurrect after write 256mb......only flash with RUU This is conflict after try repair imei or write h.boot latest Ruu and latest H.Boot)* or unlock after latest ruu?, or better get the code to not disassemble again if it has to be unlocked after ruu? and then flash the latest full ruu with hboot. and then phone ok, latest version, custom cid, unlocked and full signal, am i correct atv

12-23-2012, 23:29	#7 (permalink)
atv Freak Poster Join Date: Jan 2005 Location: N/A Posts: 282 Member: 109335 Status: Offline Thanks Meter: 27	hi riff team hi, happy hollidays, could you be so kind to explain and correct the procedure i just asked please, just to be clear in the procedure, process, steps in the inspire 4g. thank you atv

11-13-2012, 23:33	#2 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	Hi Yes,This is not HW... You need dump file for A9192 --- Open eMMC Plugin Open Dump File Press "Make Partition From File" Select Partition 13 "P4B" Press "Write Selected" ----- Or Write Dump file Via "DCC Read\Write" Page 256MB is Good

11-28-2012, 03:20	#3 (permalink)
Thatch Junior Member Join Date: Nov 2012 Location: I'm really donno,earth? Posts: 2 Member: 1845357 Status: Offline Sonork: Thatch19 Thanks Meter: 0	Hi Mr, can u pls help me unlock my phone, here's the info: Model: HTC Inspire 4G Operator: AT&T EMEI: 358920042484771 Pls let me know, thanks! Best regards-

11-29-2012, 01:49	#5 (permalink)
Thatch Junior Member Join Date: Nov 2012 Location: I'm really donno,earth? Posts: 2 Member: 1845357 Status: Offline Sonork: Thatch19 Thanks Meter: 0	Hi atv, Thanks a lot, really appreciate it. Good luck to me. lol

12-25-2012, 08:56	#8 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	Can you tell me what is exactly you want? repair no signal or unlock ?