ERROR: Stopped due to multiple communication errors. - GSM-Forum

qwg · 10-19-2010, 13:16

Help!!
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Uploading loader data into memory...OK
Starting communication with loader...OK
Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0036 (64MB)
Writting FLASH1 memory from 0x00000000 to 0x03FFFFFF
ERROR: Stopped due to multiple communication errors. Terminating at 0x00000000

**legija** · 10-19-2010, 13:24

Hi,

Please explain what You want to do, and post COMPLETE log from operation.

qwg · 10-19-2010, 14:01

I want to read and write fullflash with RIFFBOX,Read correctly,but fullflash size not

0x03ffffff, is 0x041fffff;write fullflash ERROR!

read
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.18
Selected Custom Target: [ARM926, 2.60V, TAP0]

Connecting to the ARM926 target...OK
Detected Target ID on TAP0: 0x200C00E1
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Uploading loader data into memory...OK
Starting communication with loader...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0036 (64MB)

Reading FLASH1 address space from 0x00000000 to 0x03FFFFFF
Completed in 00:02:09.422 (Average Transfer Rate: 522.20 kB/s)

write
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.18
Selected Custom Target: [ARM926, 2.60V, TAP0]

Connecting to the ARM926 target...OK
Detected Target ID on TAP0: 0x200C00E1
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Uploading loader data into memory...OK
Starting communication with loader...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0036 (64MB)

Writting FLASH1 memory from 0x00000000 to 0x03FFFFFF
ERROR: Stopped due to multiple communication errors. Terminating at 0x00000000

**legija** · 10-19-2010, 14:04

Hi,

What device You have connected please ?

qwg · 10-19-2010, 14:14

Engineering mobile
pda pxa270
modem msm6280

**legija** · 10-19-2010, 14:26

Hi,

You can try setting TCK sampling speed to lower value, e.g 1MHz for example.

Also, its is possible that PXA cpu controls MSM power, so it can shut down it.

10-19-2010, 13:16	#1 (permalink)
qwg Junior Member Join Date: Oct 2010 Posts: 23 Member: 1417615 Status: Offline Thanks Meter: 0	ERROR: Stopped due to multiple communication errors. Help!! Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Uploading loader data into memory...OK Starting communication with loader...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0036 (64MB) Writting FLASH1 memory from 0x00000000 to 0x03FFFFFF ERROR: Stopped due to multiple communication errors. Terminating at 0x00000000

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	05-21-2013 19:20
where to find a working program all they have some errors ??	fondas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	12-12-2012 13:26
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-08-2012 18:29
Copy from one 6110 to another	Leif Nielsen	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-10-1999 22:36

10-19-2010, 13:24	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Hi, Please explain what You want to do, and post COMPLETE log from operation.

10-19-2010, 14:01	#3 (permalink)
qwg Junior Member Join Date: Oct 2010 Posts: 23 Member: 1417615 Status: Offline Thanks Meter: 0	I want to read and write fullflash with RIFFBOX,Read correctly,but fullflash size not 0x03ffffff, is 0x041fffff;write fullflash ERROR! read Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.18 Selected Custom Target: [ARM926, 2.60V, TAP0] Connecting to the ARM926 target...OK Detected Target ID on TAP0: 0x200C00E1 Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Uploading loader data into memory...OK Starting communication with loader...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0036 (64MB) Reading FLASH1 address space from 0x00000000 to 0x03FFFFFF Completed in 00:02:09.422 (Average Transfer Rate: 522.20 kB/s) write Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.18 Selected Custom Target: [ARM926, 2.60V, TAP0] Connecting to the ARM926 target...OK Detected Target ID on TAP0: 0x200C00E1 Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Uploading loader data into memory...OK Starting communication with loader...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0036 (64MB) Writting FLASH1 memory from 0x00000000 to 0x03FFFFFF ERROR: Stopped due to multiple communication errors. Terminating at 0x00000000

10-19-2010, 14:04	#4 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Hi, What device You have connected please ?

10-19-2010, 14:14	#5 (permalink)
qwg Junior Member Join Date: Oct 2010 Posts: 23 Member: 1417615 Status: Offline Thanks Meter: 0	Engineering mobile pda pxa270 modem msm6280

10-19-2010, 14:26	#6 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Hi, You can try setting TCK sampling speed to lower value, e.g 1MHz for example. Also, its is possible that PXA cpu controls MSM power, so it can shut down it.