RIFF Box updates archive

[roni2]

Originally Posted by roni2

whats much do with my box if i don t have money for activate my old box to v2 now.? can i have soft for use my v1 before have money to do v2? where the link for download it
thk

Sorry all is ok. there my os (my window 8.1) , it is ok on win7

[edy badot]

why samsung g316hu does not exist yet

[SAJONDUTTA]

i active my box and i get unlimited valid

[>ShohagGsm>121]

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.48 (RIFFBOX2), JTAG Manager Version: 1.74
Selected Resurrector: [Samsung G532G ISP V1.0.6482.19990]

Connecting to the SD/eMMC Card...ERROR
Set I/O Voltage reads as 1.80V, SD_CLK Frequency is 6 MHz

Connecting to the SD/eMMC Card Failed (ERR[006E], POS[0003])

[elgollo_33]

thank you very much for the reactivation of the license I received, thankful, it was very late my thanks but in venezuela the time is worth gold since the crisis is consuming us every day more and more, grateful for those 15 days of trial that I had using the riff box, I did not take advantage of it to the fullest because I was more interested in learning to use it and gain experience, today 02-12-17 the 15 days of test that I acquired expire, and with the dream of continuing to use it but I will look for the way to get the USD 29.99 for the Activation of eMMC support for RIFF Box and continue using it, it will be difficult for my economic situation but I will try, I know that *** will bless Venezuela to move forward, THANK YOU MR LEGIJA.

[sasagsm]

ali baba team -----------lol we pay for no thing old user

[lampik]

ho to update riff box , i have all the time recovery firmware


Open serial port...OK
Connecting to the RIFF Box...OK

Getting RIFF Box Info...OK
RIFF Box Firmware Version: RECOVERY (RIFFBOX1)

Connecting to the Updates Server...OK
Downloading new Firmware from Server...OK

Setting Update Mode...





after some time nothing happends




When i close program an open once again i get Open serial port...OK
Connecting to the RIFF Box...OK

Getting RIFF Box Info...OK
RIFF Box Bootcore Version: 1.01 (RIFFBOX1)

Connecting to the Updates Server...OK
Downloading new Firmware from Server...OK

Setting Update Mode...OK
Updating Box's Firmware...OK
Restarting box, please wait...OK
Firmware Update Completed OK

Current Firmware Version: RECOVERY (RIFFBOX1)

[.::EXTREME::.]

Are you K?

[MartínSacapone]

What about UFS memory reading in RIFF BOX? When this improvement will happen?

[Monty]

Originally Posted by lampik

ho to update riff box , i have all the time recovery firmware


Open serial port...OK
Connecting to the RIFF Box...OK

Getting RIFF Box Info...OK
RIFF Box Firmware Version: RECOVERY (RIFFBOX1)

Connecting to the Updates Server...OK
Downloading new Firmware from Server...OK

Setting Update Mode...





after some time nothing happends




When i close program an open once again i get Open serial port...OK
Connecting to the RIFF Box...OK

Getting RIFF Box Info...OK
RIFF Box Bootcore Version: 1.01 (RIFFBOX1)

Connecting to the Updates Server...OK
Downloading new Firmware from Server...OK

Setting Update Mode...OK
Updating Box's Firmware...OK
Restarting box, please wait...OK
Firmware Update Completed OK

Current Firmware Version: RECOVERY (RIFFBOX1)

Me to
When i want to update firmware it's stop on 8% when firmware is updating and application shown error (Error: No response from RIFF BOX).

After that BOX have no SN and firmware. I Can repair it by clicking firmware update but after that i have only:

Getting RIFF Box Info...OK
RIFF Box Bootcore Version: 1.01 (RIFFBOX1)

Connecting to the Updates Server...OK
Downloading new Firmware from Server...OK

Setting Update Mode...OK
Updating Box's Firmware...OK
Restarting box, please wait...OK
Firmware Update Completed OK

Current Firmware Version: RECOVERY (RIFFBOX1)

After that i click FIRMWARE UPDATE. Firmware update stop at 8% again

How can i repair my RiffBox. I need it. I working on it everyday. I need it

[sasagsm]

failer team not rocker team

[mdali786]

please add compleate soluation

[yunus_7x]

Originally Posted by lampik

ho to update riff box , i have all the time recovery firmware


Open serial port...OK
Connecting to the RIFF Box...OK

Getting RIFF Box Info...OK
RIFF Box Firmware Version: RECOVERY (RIFFBOX1)

Connecting to the Updates Server...OK
Downloading new Firmware from Server...OK

Setting Update Mode...





after some time nothing happends




When i close program an open once again i get Open serial port...OK
Connecting to the RIFF Box...OK

Getting RIFF Box Info...OK
RIFF Box Bootcore Version: 1.01 (RIFFBOX1)

Connecting to the Updates Server...OK
Downloading new Firmware from Server...OK

Setting Update Mode...OK
Updating Box's Firmware...OK
Restarting box, please wait...OK
Firmware Update Completed OK

Current Firmware Version: RECOVERY (RIFFBOX1)

which windows version you are using??

[yunus_7x]

Originally Posted by legija

Hello dear RIFF Box users !

We're proud to announce newest updates for RIFF Box v1 and RIFF BOX v2:

RIFF Box Firmware v1.48
---------------------------
- New SD/MMC Interface is added for RIFF1: the CPLD is used for data shifting at max 8MHz rate.
As the eMMC signals the TDI, TMS, RTCX, and TDO signals on JTAG Connector are used. Read/Write speeds at 8MHz are aprroximately 800KB/sec - read, 365KB/s - write.
Since the new SD/MMC Interface shares the JTAG port connector, in the JTAG Manager in the SD/MMC Interface list, it is named as 'JTAG';
- The eMMC Read/Write speeds for GPIO (RJ-45) SD/MMC Interface are increased: 260KB/s - read, 360 KB/s - write (compare with Firmware 1.47: ~198 KB/s - read, 190 KB/s - write)
- The eMMC Read speeds for RIFF2 (30PN) SD/MMC Interface are increased: at SD/MMC Clock Speed = 34MHz: ~9.50MB/s - read (compare with Firmware 1.47: ~7.80 MB/s - read)
- The eMMC Write speeds for RIFF2 (30PN) SD/MMC Interface are increased more than 20x(!!!) times: at SD/MMC Clock Speed = 34MHz: 6.40MB/s - write (compare with Firmware 1.47: ~390 KB/s - write)


RIFF JTAG Manager v1.74
---------------------------
- ExtCSD Register's fields 177, 179 and 162 (BOOT_BUS_CONDITIONS, PARTITION_CONFIG, and RST_n_FUNCTION) are now displayed in eMMC connection info ("Check eMMC/SD Card" button or eMMC Advanced Actions Dialog's "Read Info from eMMC")
- Added selection of SD/MMC H/W Interface: currently are available:
> 1. RIFF1 SD/MMC Interface @RJ45 Connector
> 2. RIFF1 SD/MMC Interface @JTAG Connector
> 3. RIFF2 SD/MMC Interface @30-Pin Connector
- Added real-time RIFFBOX status (in StatusBar): the BOX revision (RIFFBOX1/RIFFBOX2) and Firmware version
- Improved switching on-the-fly of the JTAG Manager's specific to RIFFBOX revision parameters, immediately when the new box is connected to PC while JTAG Manager is running.
- Schematics picture is updated (RIFF JTAG Pinout button on the Resurrection page). Schematics picture is now displayed depending on the box revision - RIFFBOX1 or RIFFBOX2.
- Fixed buffer overrun bug in RIFF2 firmware, which caused getting chaotically corrupted data during the eMMC Read operations
- Added one-time Start Trial Period feature for RIFF v1 users


RIFF Remote Helper v1.10
----------------------------
- Added support for RIFF v2 hardware
- Added support for new drivers
- Remote Helper is now included with setup package by default.


You can download new files from RIFF Box home page:

www.riffbox.org


- RIFF Box v1 SD/eMMC interface via JTAG port (CPLD):

In order to maximize read/write speed on v1 hardware, we decided to update CPLD firmware and use 20 pin port to connect SD/eMMC to RIFF Box.
Please note that RJ45 port remains functional, too.


- One Time Trial for v1 users:
For those users with expired accounts, who want to test new features for free, we added optional function. Upon connecting to RIFF Box license server, You'll be prompted to activate Trial Period (15 days) which will enable Your box with all current updates and functions.

- Support activations are permanent from now.
All users who activate their account will get "Forever" status (Including those who activated support in last 3 months). This means that there will be no more account expiration.

Dear Legija Sir ,
Form emmc programming i am having CLK,DAT0,CMD but i dont know how to get VCC and VCCIO,

PLEASE HELP SIRJEE.........THANKS

[yunus_7x]

Originally Posted by yunus_7x

Dear Legija Sir ,
Form emmc programming i am having CLK,DAT0,CMD but i dont know how to get VCC and VCCIO,

PLEASE HELP SIRJEE.........THANKS

Here is the image sir JEE

https://postimg.org/image/5f1i8qdu5/
Pls reply......