asha 701 blinking on nokia after flash with infinity best. - GSM-Forum

irfanpasha · 10-08-2012, 09:46

DEAR infinity best supporter team help me, i was fastory set a set asha701 after that its hang on nokia and than i i flash it but its on nokia blinking .logs are as follows i flash it with heigher version too but same result plz help me .
card found: S/N 4
registered to: r

Connect phone on selected interface...

Core : v1.52 , FlashEngine : v1.8

Selected FlashSettings : FullFlash
FlashFile verify disabled

Files Set for Flashing :
MCU : RM-774_111.020.0307_79u_prd.core (1).fpsx
PPM : RM-774_111.020.0307_13.01_APAC_1_79u_prd.rofs2.fpsx
PPM2 : RM-774_111.020.0307_02.01_truetest_79u_prd.rofs3.fpsx
CNT : RM-774_111.020.0307_U13.01_79u.uda (1).fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 685E0004FFFB7C40F03D9249BED10506CFCB7E43
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 006000EC
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!

TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : FEB3BB7481D3E5D0EAC907335A4402A071493D53
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 3
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\358272043715187_CR T_2nd.rpl

===Flashing [MCU]===
Erase : Processing RM-774_111.020.0307_79u_prd.core (1).fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing RM-774_111.020.0307_79u_prd.core (1).fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [SOS+DECOMP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS+IVE3A]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 501 blocks
TIME : Write time : 00:00:23
MCU Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

===Flashing [PPM]===
Erase : Processing RM-774_111.020.0307_13.01_APAC_1_79u_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-774_111.020.0307_13.01_APAC_1_79u_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 210 blocks
TIME : Write time : 00:00:09
PPM Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

===Flashing [PPM2]===
Erase : Processing RM-774_111.020.0307_02.01_truetest_79u_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-774_111.020.0307_02.01_truetest_79u_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
CMT: Writing Hash CERT [SOS+IVE3B]
Total writen 6 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

===Flashing [CNT]===
Erase : Processing RM-774_111.020.0307_U13.01_79u.uda (1).fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing RM-774_111.020.0307_U13.01_79u.uda (1).fpsx
Total writen 921 blocks
TIME : Write time : 00:00:45
CNT Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Flashing done!
Total flash time : 00:01:23
Reboot phone now...

- > AfterFlash Failed!

Reason : Downgrade try or HW Error
Anyway - try reinsert battery and PowerUp phone manualy

Connect phone on selected interface...

Done!

Elapsed: 00:03:31
Connect phone on selected interface...

Core : v1.52 , FlashEngine : v1.8

Selected FlashSettings : Manual
FlashFile verify disabled

Files Set for Flashing :
APE : RM774_059J818_111.020.0307_001.dcp
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 685E0004FFFB7C40F03D9249BED10506CFCB7E43
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 006000EC
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!

TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : FEB3BB7481D3E5D0EAC907335A4402A071493D53
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 358272043715187
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\358272043715187_CR T_2nd.rpl

===Flashing [APE]===
Erase : Processing RM774_059J818_111.020.0307_001.dcp

alpona_su · 10-08-2012, 10:16

try flash ver- RM-774_112.010.1404 and post result...............

irfanpasha · 10-09-2012, 07:26

Problem solved on that version.
than,
pasha.

10-08-2012, 09:46	#1 (permalink)
irfanpasha Insane Poster Join Date: Mar 2006 Posts: 70 Member: 248040 Status: Offline Thanks Meter: 10	asha 701 blinking on nokia after flash with infinity best. DEAR infinity best supporter team help me, i was fastory set a set asha701 after that its hang on nokia and than i i flash it but its on nokia blinking .logs are as follows i flash it with heigher version too but same result plz help me . card found: S/N 4 registered to: r Connect phone on selected interface... Core : v1.52 , FlashEngine : v1.8 Selected FlashSettings : FullFlash FlashFile verify disabled Files Set for Flashing : MCU : RM-774_111.020.0307_79u_prd.core (1).fpsx PPM : RM-774_111.020.0307_13.01_APAC_1_79u_prd.rofs2.fpsx PPM2 : RM-774_111.020.0307_02.01_truetest_79u_prd.rofs3.fpsx CNT : RM-774_111.020.0307_U13.01_79u.uda (1).fpsx Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... BootRom : 1st boot ok ASIC ID: 000000030000022600010007400C192103032108 CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00001040 EM1 ID: 00001030 PUBLIC ID: 685E0004FFFB7C40F03D9249BED10506CFCB7E43 ASIC MODE ID: 00 ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706 ROM ID: 2CAC45E23BC33C8B Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0 Processing RAWLOADER... FLIC : 006000EC Req : XSR 1.6 Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:02 Reopening the connection... Waiting for response: 30 ADL: Check mode Select ASIC [C900] PAPUBkeys : FEB3BB7481D3E5D0EAC907335A4402A071493D53 ADL: phone is in flash mode Backup enabled, will read all certificates... Reading NPC certificate... IMEI : 3 Reading CCC certificate... Reading HWC certificate... Reading R&D certificate... Reading VARIANT certificate... Reading PARTNERC certificate... Reading MDM_KEYS certificate... Cert Read done! NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... RPL saved : C:\InfinityBox\BEST\Backup\Cert\358272043715187_CR T_2nd.rpl ===Flashing [MCU]=== Erase : Processing RM-774_111.020.0307_79u_prd.core (1).fpsx Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:01 Write : Processing RM-774_111.020.0307_79u_prd.core (1).fpsx CMT: Writing Hash CERT [ADA] CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [RAP3NAND] CMT: Writing Hash CERT [SOS+PMML] CMT: Writing Hash CERT [SOS+DECOMP] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [GENIO_INIT] CMT: Writing Hash CERT [SOS+IVE3A] CMT: Writing Hash CERT [SOSUPDAPP] CMT: Writing Hash CERT [SOSDSP0] CMT: Writing Hash CERT [LDSP] CMT: Writing Hash CERT [SOS*ISASW] CMT: Writing Hash CERT [SOS+CORE] CMT: Writing Hash CERT [SOS+ROFS1] Total writen 501 blocks TIME : Write time : 00:00:23 MCU Write done ADL: Request programm status NAND status : 00000001 / 00000001 / 00000000 ===Flashing [PPM]=== Erase : Processing RM-774_111.020.0307_13.01_APAC_1_79u_prd.rofs2.fpsx Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing RM-774_111.020.0307_13.01_APAC_1_79u_prd.rofs2.fpsx CMT: Writing Hash CERT [SOS+ROFS2] Total writen 210 blocks TIME : Write time : 00:00:09 PPM Write done ADL: Request programm status NAND status : 00000001 / 00000001 / 00000000 ===Flashing [PPM2]=== Erase : Processing RM-774_111.020.0307_02.01_truetest_79u_prd.rofs3.fpsx Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing RM-774_111.020.0307_02.01_truetest_79u_prd.rofs3.fpsx CMT: Writing Hash CERT [SOS+ROFS3] CMT: Writing Hash CERT [SOS+IVE3B] Total writen 6 blocks TIME : Write time : 00:00:00 PPM Write done ADL: Request programm status NAND status : 00000001 / 00000001 / 00000000 ===Flashing [CNT]=== Erase : Processing RM-774_111.020.0307_U13.01_79u.uda (1).fpsx Erasing.... Erasing Ok... TIME : Erase time : 00:00:02 Write : Processing RM-774_111.020.0307_U13.01_79u.uda (1).fpsx Total writen 921 blocks TIME : Write time : 00:00:45 CNT Write done ADL: Request programm status NAND status : 00000001 / 00000001 / 00000000 ADL: Close_Session Content: 000300000000010000000100000000 ADL: Reboot Flashing done! Total flash time : 00:01:23 Reboot phone now... - > AfterFlash Failed! Reason : Downgrade try or HW Error Anyway - try reinsert battery and PowerUp phone manualy Connect phone on selected interface... Done! Elapsed: 00:03:31 Connect phone on selected interface... Core : v1.52 , FlashEngine : v1.8 Selected FlashSettings : Manual FlashFile verify disabled Files Set for Flashing : APE : RM774_059J818_111.020.0307_001.dcp Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... BootRom : 1st boot ok ASIC ID: 000000030000022600010007400C192103032108 CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00001040 EM1 ID: 00001030 PUBLIC ID: 685E0004FFFB7C40F03D9249BED10506CFCB7E43 ASIC MODE ID: 00 ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706 ROM ID: 2CAC45E23BC33C8B Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0 Processing RAWLOADER... FLIC : 006000EC Req : XSR 1.6 Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:02 Reopening the connection... Waiting for response: 30 Waiting for response: 29 ADL: Check mode Select ASIC [C900] PAPUBkeys : FEB3BB7481D3E5D0EAC907335A4402A071493D53 ADL: phone is in flash mode Backup enabled, will read all certificates... Reading NPC certificate... IMEI : 358272043715187 Reading CCC certificate... Reading HWC certificate... Reading R&D certificate... Reading VARIANT certificate... Reading PARTNERC certificate... Reading MDM_KEYS certificate... Cert Read done! NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... RPL saved : C:\InfinityBox\BEST\Backup\Cert\358272043715187_CR T_2nd.rpl ===Flashing [APE]=== Erase : Processing RM774_059J818_111.020.0307_001.dcp

10-09-2012, 07:26	#3 (permalink)
irfanpasha Insane Poster Join Date: Mar 2006 Posts: 70 Member: 248040 Status: Offline Thanks Meter: 10	Thank you very much. Problem solved on that version. than, pasha.

10-08-2012, 10:16	#2 (permalink)
alpona_su No Life Poster Join Date: Jan 2010 Location: Kushtia,Bangladesh Age: 36 Posts: 1,191 Member: 1217358 Status: Offline Sonork: 100.1605541 Thanks Meter: 156	try flash ver- RM-774_112.010.1404 and post result...............