to ifnity team for all chek this - GSM-Forum

abdo_as761 · 07-01-2011, 10:37

Connect phone on selected interface...
Opening Connection...
Device Location: 00000021
Connect Ok!
Initializing Connection...
JAF Firmware: 01.B6
JAF S/N ODJAF000 boot - Ok
Switch jaf to FBUS...
FbusMode set Ok
Connect phone on selected interface...
Phone found!
Series 40 Device detected! [DCT4+]
read info... - Ok
Core version : 1.23 , Rev : 4.8
Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rh93_07.020
PPM : rh93_07.02ic
CNT : rh930_nai7.02ic
===Flashing [MCU]===
Processing : rh93_07.020
1st boot Ok , UPP : 2201
Sending 2nd...
Use : u_2nd.fia
2nd patched Ok
2nd boot sent
MCUcfg not done err [FF], break
Error on 2nd boot, Check Connection/HW
Error while flashing

Switch jaf to FBUS...
Error Powering On
FbusMode set Ok
Connect phone on selected interface...

good info when flash show error

Dzirt · 07-01-2011, 11:02

box work ok with original JAF SW? Post check log of this phone.

abdo_as761 · 07-01-2011, 14:17

what meaining JAF SW

Dzirt · 07-01-2011, 15:27

original jaf software. Run it and check this dct4. You will have looks like also bad result.

abdo_as761 · 07-02-2011, 00:02

good chek and flash with jaf

Dzirt · 07-02-2011, 07:01

I not seen any logs.
Info log from best, and after from jaf+check.

07-01-2011, 10:37	#1 (permalink)
abdo_as761 No Life Poster Join Date: Mar 2008 Posts: 721 Member: 729558 Status: Offline Thanks Meter: 45	to ifnity team for all chek this Connect phone on selected interface... Opening Connection... Device Location: 00000021 Connect Ok! Initializing Connection... JAF Firmware: 01.B6 JAF S/N ODJAF000 boot - Ok Switch jaf to FBUS... FbusMode set Ok Connect phone on selected interface... Phone found! Series 40 Device detected! [DCT4+] read info... - Ok Core version : 1.23 , Rev : 4.8 Selected FlashSettings : Manual Files Set for Flashing : MCU : rh93_07.020 PPM : rh93_07.02ic CNT : rh930_nai7.02ic ===Flashing [MCU]=== Processing : rh93_07.020 1st boot Ok , UPP : 2201 Sending 2nd... Use : u_2nd.fia 2nd patched Ok 2nd boot sent MCUcfg not done err [FF], break Error on 2nd boot, Check Connection/HW Error while flashing Switch jaf to FBUS... Error Powering On FbusMode set Ok Connect phone on selected interface... good info when flash show error

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	05-21-2013 19:20
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-08-2012 18:29

07-01-2011, 11:02	#2 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	box work ok with original JAF SW? Post check log of this phone.

07-01-2011, 14:17	#3 (permalink)
abdo_as761 No Life Poster Join Date: Mar 2008 Posts: 721 Member: 729558 Status: Offline Thanks Meter: 45	what meaining JAF SW

07-01-2011, 15:27	#4 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	original jaf software. Run it and check this dct4. You will have looks like also bad result.

07-02-2011, 00:02	#5 (permalink)
abdo_as761 No Life Poster Join Date: Mar 2008 Posts: 721 Member: 729558 Status: Offline Thanks Meter: 45	good chek and flash with jaf

07-02-2011, 07:01	#6 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	I not seen any logs. Info log from best, and after from jaf+check.