Infinity-Box [BEST] NK2 v1.10 - Nokia 3310 3G support and new features - Page 5 - GSM-Forum

Kirumira · 03-19-2019, 12:55

Quote:

Originally Posted by lerner_

we need any boot key !!! not connect with phone sir

Boot Key is (#) '

JayDi · 03-19-2019, 13:51

Quote:

Originally Posted by Leini

Flashing Success on TA-1036 now, working perect. Unfortionally all 3 firmwares in Database are indonesian language Pack, does anyone have EU Language Pack? I need german, french, italian

If you can get device with need langs - can try make something.
Planning release flash dumping in next version. Then can build some firmwares, which need first.

JayDi · 03-19-2019, 13:52

Quote:

Originally Posted by Kirumira

Boot Key is (#) '

Also matter do connection as SW show in log - exactly that way allow connect it to PC in flash mode from a first try.

Next version will also support some other, old drivers versions.

JayDi · 03-19-2019, 13:53

Quote:

Originally Posted by Leini

Hi, I cannot find TA-1036 (3310 3G SS )
what do I have to select? Pls help me

There is almost no any selection options, because all done automatic.

TLS 358 · 03-19-2019, 14:36

Nokia 7.1 (TA-1095)
Swears on the loader. There is a test point.
Log attached:

noortoto24 · 03-19-2019, 15:43

hello team i ve ta1084 need to read firmware and upload it but nk 1.10 qualcom not active and v1.9 not response
any soloution
thax advance
i tried nck -umt-cm2
secure boot msm8917

mako85 · 03-19-2019, 16:43

I have Nokia 3310 3G TA-1022 with product code 059Z3D6 with langs: English, Francais, Portugues, Russian, Espanol, Italiano, Turkey, Deutsch, Romana, Dansk, Nederlands, Eesti, Suomi, Islenska, Latviesu, Lietuviu, Norsk, Svenska.

I can read it and upload but there is no option to do it.

PS I need Polish language for this phone.

badro_one · 03-19-2019, 16:50

problem reset TA-1022

Operation : Identify [ v1.10 ]

1. Power off device, remove battery
2. Insert cable, press and hold BootKey ( # )
3. Insert battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Unsupported device!

Reconnect Power/Cable!

serseg.gsm · 03-19-2019, 18:10

still have probleme reading fw from TA range

am i alone ?

any help please!

Quote:

Card found : 3Fxxxxxxx , v0122
Infinity-Box BEST Nokia [HMD] Module [NK2] v1.10

Operation : Read FirmWare [ v1.10 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM13)
MODE : NOKIA USB SERIAL
PORT : 13
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 627D2EAB27112A017284EB1400E30976
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : N103.30.04.11.p1
BOOT : SWR : 30.04.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003

Boot done!

SWVer : N103.30.04.11.p1
FLASH : 00C2 : 0025 : 0036 : 0000
CODE : 0x00370000
Reading Flash ...

Error : Failed to read data! Unexpected end of data!
Check cable, connection and drivers!

Reconnect Power/Cable!

serseg.gsm · 03-19-2019, 18:11

Quote:

Originally Posted by JayDi

There is almost no any selection options, because all done automatic.

find it at Nokia MTK FP section

JayDi · 03-20-2019, 12:27

Quote:

Originally Posted by serseg.gsm

find it at Nokia MTK FP section

It used just in FW builder and just for VPL naming. Better user expirience.

JayDi · 03-20-2019, 12:29

Quote:

Originally Posted by badro_one

problem reset TA-1022

Operation : Identify [ v1.10 ]

1. Power off device, remove battery
2. Insert cable, press and hold BootKey ( # )
3. Insert battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Unsupported device!

Reconnect Power/Cable!

It is chinese copy on SC6531(E)

JayDi · 03-20-2019, 12:30

Quote:

Originally Posted by mako85

I have Nokia 3310 3G TA-1022 with product code 059Z3D6 with langs: English, Francais, Portugues, Russian, Espanol, Italiano, Turkey, Deutsch, Romana, Dansk, Nederlands, Eesti, Suomi, Islenska, Latviesu, Lietuviu, Norsk, Svenska.

I can read it and upload but there is no option to do it.

PS I need Polish language for this phone.

I will activate flash dumping in next release. ETA 1-2 days max.

JayDi · 03-20-2019, 12:33

Quote:

Originally Posted by TLS 358

Nokia 7.1 (TA-1095)
Swears on the loader. There is a test point.
Log attached:

Quote:

Originally Posted by noortoto24

hello team i ve ta1084 need to read firmware and upload it but nk 1.10 qualcom not active and v1.9 not response
any soloution
thax advance
i tried nck -umt-cm2
secure boot msm8917

QLM devices support under complete rebuild. Will be activated very soon.

JayDi · 03-20-2019, 12:34

Quote:

Originally Posted by serseg.gsm

still have probleme reading fw from TA range

am i alone ?

any help please!

Make sure about device battery charged fully. In settings tab try aset lower speed.

03-19-2019, 14:36	#65 (permalink)
TLS 358 Junior Member Join Date: Dec 2012 Posts: 7 Member: 1860924 Status: Offline Thanks Meter: 0	Nokia 7.1 (TA-1095) Swears on the loader. There is a test point. Log attached:

03-19-2019, 15:43	#66 (permalink)
noortoto24 Freak Poster Join Date: Nov 2015 Location: cairo Posts: 105 Member: 2489079 Status: Offline Thanks Meter: 32	hello team i ve ta1084 need to read firmware and upload it but nk 1.10 qualcom not active and v1.9 not response any soloution thax advance i tried nck -umt-cm2 secure boot msm8917

03-19-2019, 16:43	#67 (permalink)
mako85 Freak Poster Join Date: Jul 2005 Location: Poland, Tarnów Age: 39 Posts: 111 Member: 159960 Status: Offline Thanks Meter: 2	I have Nokia 3310 3G TA-1022 with product code 059Z3D6 with langs: English, Francais, Portugues, Russian, Espanol, Italiano, Turkey, Deutsch, Romana, Dansk, Nederlands, Eesti, Suomi, Islenska, Latviesu, Lietuviu, Norsk, Svenska. I can read it and upload but there is no option to do it. PS I need Polish language for this phone.

03-19-2019, 16:50	#68 (permalink)
badro_one Major Poster Join Date: Aug 2017 Posts: 40 Member: 2743796 Status: Offline Thanks Meter: 9	problem reset TA-1022 Operation : Identify [ v1.10 ] 1. Power off device, remove battery 2. Insert cable, press and hold BootKey ( # ) 3. Insert battery in device! Wait for device ... Device Connected! BootVersion : SPRD3 ERROR : Protocol HandShake failed! Error : Fail to init protocol! Unsupported device! Reconnect Power/Cable!