nokia 108 flash ok but hang on nokia - GSM-Forum

inamullah790000 · 10-20-2014, 09:16

108 rm-944 flash ok but hang on nokia

usb power on showing not charging

Dzirt · 10-20-2014, 11:30

Did you try make "Format FS" also?
Check battery also.

inamullah790000 · 10-20-2014, 11:48

other firmware try
Format FS
not don

Dzirt · 10-20-2014, 12:10

Probably - need resolder CPU and check power lines.
After - flash again.

inamullah790000 · 10-20-2014, 12:20

Quote:

Originally Posted by Dzirt

Probably - need resolder CPU and check power lines.
After - flash again.

resolder CPU flash again flash complete wating nokia showing after not charging

Dzirt · 10-20-2014, 12:26

If you really resolder it and check all rest - seems as it spareparts, but try also Repair Maui ( files on support ) and format fs after.

inamullah790000 · 10-20-2014, 12:48

Quote:

Originally Posted by Dzirt

If you really resolder it and check all rest - seems as it spareparts, but try also Repair Maui ( files on support ) and format fs after.

card found: S/N 8E35:0122
registered to: inamullah

Connect phone on selected interface...

IDM initializing, wait...
Checking access to Products folder...
Folder for RM-944 not exist. Attempt to create
Prepare done, collect info
[Query] : RM-944_auth_sv5_eMP.auth , 2.20 KB
[Query] : RM-944_ROOTCERT_Signed_By_MTK_eMP_20.06.11 , 1.32 KB
[Query] : RM-944_EXT_BOOTLOADER_eMP_20.06.11 , 77.68 KB
[Query] : RM-944_SECURE_RO_ME_eMP_20.06.11 , 1.59 KB
[Query] : RM-944_ROM_eMP_20.06.11 , 203.16 KB
[Query] : RM-944_VIVA_eMP_20.06.11 , 2.62 MB
[Query] : RM-944_LANG_PACK_ROM_IC_eMP_20.06.11 , 462.35 KB
[Query] : RM-944_IMAGE_eMP_059S7Q8_20.06.11.cfg , 3.01 KB
[Query] : RM-944_CUSTPACK_ROM_IC_MEA_SA_eMP_20.06.11 , 56.56 KB
[Query] : RM-944_JUMP_TABLE_IC_MEA_SA_eMP_20.06.11 , 1.15 KB
[Query] : RM944_059S7Q8_20.06.11_013.vpl , 4.37 KB
Files to download : 11
Total size to download : 3.42 MB
Downloading now, please, wait...
[Download] : RM-944_auth_sv5_eMP.auth
[Download] : RM-944_ROOTCERT_Signed_By_MTK_eMP_20.06.11
[Download] : RM-944_EXT_BOOTLOADER_eMP_20.06.11
[Download] : RM-944_SECURE_RO_ME_eMP_20.06.11
[Download] : RM-944_ROM_eMP_20.06.11
[Download] : RM-944_VIVA_eMP_20.06.11
[Download] : RM-944_LANG_PACK_ROM_IC_eMP_20.06.11
[Download] : RM-944_IMAGE_eMP_059S7Q8_20.06.11.cfg
[Download] : RM-944_CUSTPACK_ROM_IC_MEA_SA_eMP_20.06.11
[Download] : RM-944_JUMP_TABLE_IC_MEA_SA_eMP_20.06.11
[Download] : RM944_059S7Q8_20.06.11_013.vpl
Verify files now .....
[Verify Ok] : RM-944_IMAGE_eMP_059S7Q8_20.06.11.cfg
[Verify Ok] : RM-944_ROOTCERT_Signed_By_MTK_eMP_20.06.11
[Verify Ok] : RM-944_EXT_BOOTLOADER_eMP_20.06.11
[Verify Ok] : RM-944_SECURE_RO_ME_eMP_20.06.11
[Verify Ok] : RM-944_ROM_eMP_20.06.11
[Verify Ok] : RM-944_LANG_PACK_ROM_IC_eMP_20.06.11
[Verify Ok] : RM-944_CUSTPACK_ROM_IC_MEA_SA_eMP_20.06.11
[Verify Ok] : RM-944_JUMP_TABLE_IC_MEA_SA_eMP_20.06.11
[Verify Ok] : RM-944_VIVA_eMP_20.06.11
[Verify Ok] : RM-944_auth_sv5_eMP.auth
All done, all files were downloaded!

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 40 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : FB71AD6FB969FE7CE07C75D187AA823B
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x000E
Project ID : Bree.22.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Bree.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
Executing FFS FORMAT now...
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

Connect phone on selected interface...

Core : v1.97 , MTKx FlashEngine : v5.0

Verify files ...
MAUI : RM-944_ROM_eMP_20.06.11
VIVA : RM-944_VIVA_eMP_20.06.11
LANG : RM-944_LANG_PACK_ROM_IC_eMP_20.06.11
CUST : RM-944_CUSTPACK_ROM_IC_MEA_SA_eMP_20.06.11
JMPT : RM-944_JUMP_TABLE_IC_MEA_SA_eMP_20.06.11
- > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 40 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : FB71AD6FB969FE7CE07C75D187AA823B
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x000E
Project ID : Bree.22.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Bree.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
SecureDecrypt : RM-944_ROM_eMP_20.06.11
SecureDecrypt : RM-944_VIVA_eMP_20.06.11
SecureDecrypt : RM-944_LANG_PACK_ROM_IC_eMP_20.06.11
SecureDecrypt : RM-944_CUSTPACK_ROM_IC_MEA_SA_eMP_20.06.11
SecureDecrypt : RM-944_JUMP_TABLE_IC_MEA_SA_eMP_20.06.11
OVRLP : 000069B900000001
PHPID : Bree.22.00.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
ERASE_MAUI_INFO : 0x0001B000
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-944_ROM_eMP_20.06.11
Write : RM-944_LANG_PACK_ROM_IC_eMP_20.06.11
Write : RM-944_CUSTPACK_ROM_IC_MEA_SA_eMP_20.06.11
Write : RM-944_JUMP_TABLE_IC_MEA_SA_eMP_20.06.11
Write : RM-944_VIVA_eMP_20.06.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-944_ROM_eMP_20.06.11
[VERIFY] DONE : RM-944_LANG_PACK_ROM_IC_eMP_20.06.11
[VERIFY] DONE : RM-944_CUSTPACK_ROM_IC_MEA_SA_eMP_20.06.11
[VERIFY] DONE : RM-944_JUMP_TABLE_IC_MEA_SA_eMP_20.06.11
[VERIFY] DONE : RM-944_VIVA_eMP_20.06.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:01:02
Reboot phone Ok

- > Hint : If phone shows Battery charge icon - press and hold PowerOn button 10 seconds

- > AfterFlash Not Done! Reason : Driver/Connection fault or HW Error
Re-insert battery and PowerUp phone manualy

Phone disconected!

Connect phone on selected interface...

Connect phone on selected interface...

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 40 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : FB71AD6FB969FE7CE07C75D187AA823B
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x000E
Project ID : Bree.20.06.11.p4
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Bree.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
Executing FFS FORMAT now...
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

Connect phone on selected interface...

card found: S/N 8E35:0122
registered to: inamullah

Connect phone on selected interface...

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 40 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : FB71AD6FB969FE7CE07C75D187AA823B
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x000E
Project ID : Bree.20.06.11.p4
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Bree.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
Executing FFS FORMAT now...
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

result

HANG ON NOKIA

Dzirt · 10-20-2014, 13:00

Seems as you just flash it and nothing more, you even can't do things, which I write - repair maui. I not see it in logs.

sngsm · 10-20-2014, 14:55

Dear try to change its LCD
i done 2 phones with same method

Regards
Ahsan

10-20-2014, 09:16	#1 (permalink)
inamullah790000 No Life Poster Join Date: Jul 2013 Location: kpk Pakistan Posts: 1,170 Member: 1985156 Status: Offline Sonork: 100.1652265 Thanks Meter: 313	nokia 108 flash ok but hang on nokia 108 rm-944 flash ok but hang on nokia usb power on showing not charging

10-20-2014, 11:30	#2 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Did you try make "Format FS" also? Check battery also.

10-20-2014, 11:48	#3 (permalink)
inamullah790000 No Life Poster Join Date: Jul 2013 Location: kpk Pakistan Posts: 1,170 Member: 1985156 Status: Offline Sonork: 100.1652265 Thanks Meter: 313	other firmware try Format FS not don

10-20-2014, 12:10	#4 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Probably - need resolder CPU and check power lines. After - flash again.

10-20-2014, 12:26	#6 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	If you really resolder it and check all rest - seems as it spareparts, but try also Repair Maui ( files on support ) and format fs after.

10-20-2014, 13:00	#8 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Seems as you just flash it and nothing more, you even can't do things, which I write - repair maui. I not see it in logs.

10-20-2014, 14:55	#9 (permalink)
sngsm Freak Poster Join Date: Apr 2007 Posts: 254 Member: 496120 Status: Offline Thanks Meter: 57	Dear try to change its LCD i done 2 phones with same method Regards Ahsan