|
Nokia 130 RM-1035 Contact Service! Hello, I received a phone right to the message and try to fix it in a way that I do I read RPL backup then it can flash by product code 059W071 upload the whole procedure is successful. The problem is, however, how Loading a backup security RPL is the info I have damaged IMEI visible in the log. Control Block Validation (Security Test) : CBR is Ok, match with BB SN. Phone Security is Alive :) Mobile Info : IMEI : 35371407107xxxx BBUID : C7DDEF8609987C9BF91B5E6591AD5733 SimLock Info : STATE : OPENED ( NOT LOCKED ) RPL Saved to : 35371407107xxxx_MTKx_2nd.mtsec Read Done! ================================================== ============== Phone found! MTKx Nokia Phone detected Read info... Ok Reading Phone Info.... Software ver : 10.02.11 00-00-00 RM-1035 IMEI 1 : 123456789012345 IMEI 2 : 123456789012345 XappVer : 00000898 Ape Ver : NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul 1 02:50:44 2013 U 69b804d5 PPM : AD CNT : CRYSTAL.10.02.11.p1 Product code : Hardware info======= HWID : LCDVer: TPO Lock info =========== IMEI : 123456789012345 IMEI spNet : 0A 00 00 00 00 00 00 00 Lock info: SimLock status : Ok Security status : Damaged!!!!! Done! |
Hello. Seems as it is not a RM-1035, but another RM ( or RM1036 , RM1037 , RM1122 ) |
On a sticker under the battery have clearly RM -1035. Under the product code are two versions of the software 10.01.10 - i not tried, because I can not find 10.02.10 - for this version I as described |
I'm sorry my mistake! As for the software version:mad: 10.01.11 - i not tried , because I can not find 10.02.11 - for this version I as described |
Did you read my post? Better just attach here RPL backup. I will check it and say ezxactly where problem is. |
I can not put any attachment request to the admin of the solution to the problem. |
Does it really hard upload file to any sharing then put link here without http prefix??? |
i also recieved many phones with contact service...whats the solution? |
Quote:
Ok file here http://www.filedropper.com/353714071072481mtkx |
Quote:
|
If anyone can help solve the case of security ? Please help anyone:( |
Hi! Thank you for updating Best dongle. The phone finally rescued. Regards.:cool: |
Quote:
Please, post operation logs as well. It help us improve next SW version more. |
Hello! The latest update Best v2.22 saved phone and here's the log: Core : v2.22 , MTKx FlashEngine : v9.9 Connect phone on selected interface... Phone found! MTKx Nokia Phone detected Read info... Ok Software Info: 10.01.11 00-00-00 RM-1035 IMEI: 123456789012345 PPM version : MH Product code: 059W2F9 Rebooting phone to FlashMode... Wait for phone... Phone found! [ 27 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CB00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0001 BB_CPU_SN : C7DDEF8609987C9BF91B5E6591AD5733 BROM Protocol Version : 05 BROM Status : 0000 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... Setting done , result code 0x8000 Project ID : CRYSTAL.10.01.11.p2 BROM/BL stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... DA_eMP_Crystal.fg DA_VERIFY : 00 DA_JUMP : 00040000 DA_AUTH : Passed! DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B DA_CSTAT : 0x5A SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV [0] : FLASH_DIE : 00EF 0040 0016 0000 [0] : FLASH_LEN : 0x00400000 FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000 Boot Ok Get settings... [INFO] : Encrypted RPL [RPL VERIFY] : Code 0x10 : MOBILE_ID match with MOBILE_ID info in RPL! Trying recover security data ... Security restored Wait for re-connection ... Wait for phone... Phone found! [ 27 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CB00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0001 BB_CPU_SN : C7DDEF8609987C9BF91B5E6591AD5733 BROM Protocol Version : 05 BROM Status : 0000 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... BROM/BL stage done PostFixing ... PostFix done! All done! Connect phone on selected interface... Phone found! MTKx Nokia Phone detected Read info... Ok Reading Phone Info.... Software ver : 10.01.11 00-00-00 RM-1035 IMEI 1 : 35371407107XXXX IMEI 2 : 35371407107XXXX XappVer : 000008AC Ape Ver : NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul 1 02:50:44 2013 U 69b804d5 PPM : MH CNT : CRYSTAL.10.01.11.p2 Product SN : AC499EAAU Product code : 059W071 Base Prd.code: 059W669 Module code : 0206396 Hardware info======= HWID : 3200 LCDVer: TPO Lock info =========== IMEI : 35371407107XXXX IMEI spNet : 3A 35 17 04 17 70 42 18 Lock info: Block 1 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 2 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 3 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 4 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 5 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 6 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; Block 7 L1:Open; L2:Open; L3:Open; L4:Open; L5:Open; SimLock status : Ok Security status : Ok Done! Thx!;) |
nokia 130 how to flash contact service |
help me............. nokia 130 flash with miracle box for contact service how to solve solutions |
NKOIA 130 FLASH AFTER CONTACT SRVICE here log Code: Core : v2.23 , MTKx FlashEngine : v10.1 |
BEST doesn't kill phones. Make Read RPL and check security. Then, if it alive - do repair. |
|
heeelp me all files delited and solition in youtob for contact service nokia 130 is faaaake help me all brother |
Please help me !!! where can I download firmware nokia 130 rm-1035 code 059w062 I was wrong firmware flash but kept hendphone in turn only contact service just emerging. please help me sir |
Guys, run away from here. Google, seek, smash device by the wall and leave that. |
nokia 130 how to flash contact service erase plz help |
nokia 130 how to flash contact service |
Rm-1035 contact service...whats the solution? |
Quote:
Quote:
|
Quote:
S30+ RM-1035 NDT APAC ME STROKE ID ERA | NokiaFirmware.Net |
Quote:
|
1 Attachment(s) I got same issue after flash 130 , contact service Control Block Validation (Security Test) : CBR is Ok, match with BB SN. Phone Security is Alive :) Mobile Info IMEI : 354895080640407 BBUID : F8237DD2A00F968D5CAC0D3586339881 PCCode: 059W035 SimLock Info : STATE : OPENED ( NOT LOCKED ) RPL Saved to : 354895080640407_MTKx_2nd.mtsec Any solution please guys , software 2.28 |
Quote:
|
Connect phone on selected interface... Core : v2.28 , MTKx FlashEngine : v12.0 Verify files ... MAUI : RM-1035_ROM_eMP_11.00.11 VIVA : RM-1035_VIVA_eMP_11.00.11 LANG : RM-1035_LANG_PACK_ROM_IM_eMP_11.00.11_002 CUST : RM-1035_CUSTPACK_ROM_IM_MEA_BH_eMP_11.00.11_002 JMPT : RM-1035_JUMP_TABLE_IM_MEA_BH_eMP_11.00.11_002 - > MODE : FullFlash Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Battery must be charged and inserted! ( if not used external power ) - > If phone can't switch to BL - use battery or flash from Local mode! --- Insert USB cable now! --- Wait for phone... Phone found! [ 19 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CB00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0001 BB_CPU_SN : F8237DD2A00F968D5CAC0D3586339881 BROM Protocol Version : 05 BROM Status : 0000 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... Setting done , result code 0x8000 Project ID : CRYSTAL.11.00.11.p1 BROM/BL stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... DA_eMP_Crystal.fg DA_VERIFY : 00 DA_JUMP : 00040000 DA_AUTH : Passed! DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B DA_CSTAT : 0x5A SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV [0] : FLASH_DIE : 00EF 0040 0016 0000 [0] : FLASH_LEN : 0x00400000 FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000 SecureDecrypt : RM-1035_ROM_eMP_11.00.11 SecureDecrypt : RM-1035_VIVA_eMP_11.00.11 SecureDecrypt : RM-1035_LANG_PACK_ROM_IM_eMP_11.00.11_002 SecureDecrypt : RM-1035_CUSTPACK_ROM_IM_MEA_BH_eMP_11.00.11_002 SecureDecrypt : RM-1035_JUMP_TABLE_IM_MEA_BH_eMP_11.00.11_002 OVRLP : 000069B900000001 PHPID : CRYSTAL.11.00.11.p1 OVRLP : 00004DF900000001 DA : FORMAT_BIN Processing Flash Pre-format FILES : 5 SAFE_BLOCK : 04 FORMAT_BIN : Ok WRITE_STYLE : DEF : 0x01 (SEQ) Write : RM-1035_ROM_eMP_11.00.11 Write : RM-1035_LANG_PACK_ROM_IM_eMP_11.00.11_002 Write : RM-1035_CUSTPACK_ROM_IM_MEA_BH_eMP_11.00.11_002 Write : RM-1035_JUMP_TABLE_IM_MEA_BH_eMP_11.00.11_002 Write : RM-1035_VIVA_eMP_11.00.11 CODE_DNLOAD : Ok [VERIFY] DONE : RM-1035_ROM_eMP_11.00.11 [VERIFY] DONE : RM-1035_LANG_PACK_ROM_IM_eMP_11.00.11_002 [VERIFY] DONE : RM-1035_CUSTPACK_ROM_IM_MEA_BH_eMP_11.00.11_002 [VERIFY] DONE : RM-1035_JUMP_TABLE_IM_MEA_BH_eMP_11.00.11_002 [VERIFY] DONE : RM-1035_VIVA_eMP_11.00.11 CODE_VERIFY : Ok Executing FFS FORMAT now... FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000 DA_RET : DA_IN_PROGRESS DA_RET : FORMAT_DONE Rebooting phone now Flashing done! Total flash time : 00:01:05 Reboot phone Ok Connect phone on selected interface... Phone found! MTKx Nokia Phone detected Read info... Ok Reading Phone Info.... Software ver : 11.00.11 00-00-00 RM-1035 IMEI 1 : 123456789012345 IMEI 2 : 123456789012345 XappVer : 000008E8 Ape Ver : NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul 1 02:50:44 2013 U 69b804d5 PPM : IM CNT : CRYSTAL.11.00.11.p1 Product SN : 03FFCAABU Product code : 059W035 Base Prd.code: 059X9M1 Module code : 0207191 Hardware info======= HWID : 3200 LCDVer: TPO Lock info =========== IMEI : 123456789012345 IMEI spNet : 0A 00 00 00 00 00 00 00 Conf key : 0000000000040000 Provider key : 0000000000000000 Country : Unknown Operator : Unknown Lock info: SimLock status : Ok Security status : Damaged!!!!! Done! |
Make Read RPl and check security state. |
Connect phone on selected interface... Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Battery must be charged and inserted! ( if not used external power ) - > If phone can't switch to BL - use battery or flash from Local mode! --- Insert USB cable now! --- Wait for phone... Phone found! [ 19 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CB00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0001 BB_CPU_SN : F8237DD2A00F968D5CAC0D3586339881 BROM Protocol Version : 05 BROM Status : 0000 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... Setting done , result code 0x8000 Project ID : CRYSTAL.11.00.11.p1 BROM/BL stage done Configure RAMINIT Ok Reading flash now ... Done! Control Block Validation (Security Test) : CBR is Ok, match with BB SN. Phone Security is Alive :) Mobile Info IMEI : 354895080640407 BBUID : F8237DD2A00F968D5CAC0D3586339881 PCCode: 059W035 SimLock Info : STATE : OPENED ( NOT LOCKED ) RPL Saved to : 354895080640407_MTKx_2nd.mtsec Read Done! Connect phone on selected interface... |
Verify files ... MAUI : RM-1035_ROM_eMP_11.00.11 VIVA : RM-1035_VIVA_eMP_11.00.11 LANG : RM-1035_LANG_PACK_ROM_IC_eMP_11.00.11_002 CUST : RM-1035_CUSTPACK_ROM_IC_MEA_JO_eMP_11.00.11_002 JMPT : RM-1035_JUMP_TABLE_IC_MEA_JO_eMP_11.00.11_002 - > MODE : FullFlash Repair Mode is On Dead Mode is Selected Waiting for USB device... 1. Phone should be Off! 2. Battery must be charged and inserted! ( if not used external power ) - > If phone can't switch to BL - use battery or flash from Local mode! --- Insert USB cable now! --- Wait for phone... Phone found! [ 19 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CB00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0001 BB_CPU_SN : F8237DD2A00F968D5CAC0D3586339881 BROM Protocol Version : 05 BROM Status : 0000 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... Setting done , result code 0x8000 Project ID : CRYSTAL.11.00.11.p1 BROM/BL stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... DA_eMP_Crystal.fg DA_VERIFY : 00 DA_JUMP : 00040000 DA_AUTH : Passed! DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B DA_CSTAT : 0x5A SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV [0] : FLASH_DIE : 00EF 0040 0016 0000 [0] : FLASH_LEN : 0x00400000 FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000 SecureDecrypt : RM-1035_ROM_eMP_11.00.11 SecureDecrypt : RM-1035_VIVA_eMP_11.00.11 SecureDecrypt : RM-1035_LANG_PACK_ROM_IC_eMP_11.00.11_002 SecureDecrypt : RM-1035_CUSTPACK_ROM_IC_MEA_JO_eMP_11.00.11_002 SecureDecrypt : RM-1035_JUMP_TABLE_IC_MEA_JO_eMP_11.00.11_002 OVRLP : 000069B900000001 PHPID : CRYSTAL.11.00.11.p1 OVRLP : 00004DF900000001 DA : FORMAT_BIN Processing Flash Pre-format FILES : 5 SAFE_BLOCK : 04 FORMAT_BIN : Ok WRITE_STYLE : DEF : 0x01 (SEQ) Write : RM-1035_ROM_eMP_11.00.11 Write : RM-1035_LANG_PACK_ROM_IC_eMP_11.00.11_002 Write : RM-1035_CUSTPACK_ROM_IC_MEA_JO_eMP_11.00.11_002 Write : RM-1035_JUMP_TABLE_IC_MEA_JO_eMP_11.00.11_002 Write : RM-1035_VIVA_eMP_11.00.11 CODE_DNLOAD : Ok [VERIFY] DONE : RM-1035_ROM_eMP_11.00.11 [VERIFY] DONE : RM-1035_LANG_PACK_ROM_IC_eMP_11.00.11_002 [VERIFY] DONE : RM-1035_CUSTPACK_ROM_IC_MEA_JO_eMP_11.00.11_002 [VERIFY] DONE : RM-1035_JUMP_TABLE_IC_MEA_JO_eMP_11.00.11_002 [VERIFY] DONE : RM-1035_VIVA_eMP_11.00.11 CODE_VERIFY : Ok Executing FFS FORMAT now... FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000 DA_RET : DA_IN_PROGRESS DA_RET : FORMAT_DONE Rebooting phone now Flashing done! Total flash time : 00:01:03 Reboot phone Ok - > Hint : If phone shows Battery charge icon - press and hold PowerOn button 10 seconds Wait, when phone will be ready ... Reading Phone Info.... Software Info: 11.00.11 00-00-00 RM-1035 IMEI: 123456789012345 Ape Version: NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul 1 02:50:44 2013 U 69b804d5 PPM version : IC Product code: 059W035 Wait, when phone will be ready ... Checking... SimLock status : SimLock is Ok Security status : Security Damaged!!!!! :( Read Info Done! Connect phone on selected interface... Phone found! MTKx Nokia Phone detected Read info... Ok Seems security is damaged . How to fix it please |
There is can be few reasons : 1. Downgrade ( almost possible ) you post not first try log, seems, so can't say exactly what has been inside phone before. 2. Wrong RM. |
language changing , may be i not pay atention on mcu verion , surely downgraded . Any sugestion to revive phone Sir ? |
Quote:
|
need rm-1035 v14.11.00 |
testet file from famerom file here |
Quote:
|
Quote:
--- Insert USB cable now! --- Wait for phone... Phone found! [ 19 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6260 BB_CPU_HW : CB00 BB_CPU_SW : 0000 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6260_S0001 BB_CPU_SN : F8237DD2A00F968D5CAC0D3586339881 BROM Protocol Version : 05 BROM Status : 0000 Comm Status : 0000 EXBL Status : Alive [ USB Load Active ] Switch to BL done BL Version : 01 Setting... Setting done , result code 0x8000 Project ID : CRYSTAL.14.00.11.p1 BROM/BL stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... DA_eMP_Crystal.fg DA_VERIFY : 00 DA_JUMP : 00040000 DA_AUTH : Passed! DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B DA_CSTAT : 0x5A SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV [0] : FLASH_DIE : 00EF 0040 0016 0000 [0] : FLASH_LEN : 0x00400000 FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000 SecureDecrypt : RM-1035_ROM_eMP_10.02.11 SecureDecrypt : RM-1035_VIVA_eMP_10.02.11 SecureDecrypt : RM-1035_LANG_PACK_ROM_AD_eMP_10.02.11_001 SecureDecrypt : RM-1035_CUSTPACK_ROM_AD_EURO_DE_eMP_10.02.11_001 SecureDecrypt : RM-1035_JUMP_TABLE_AD_EURO_DE_eMP_10.02.11_001 OVRLP : 000069B900000001 PHPID : CRYSTAL.14.00.11.p1 OVRLP : 00004DF900000001 DA : FORMAT_BIN Processing Flash Pre-format FILES : 5 SAFE_BLOCK : 04 FORMAT_BIN : Ok WRITE_STYLE : DEF : 0x01 (SEQ) Write : RM-1035_ROM_eMP_10.02.11 Write : RM-1035_LANG_PACK_ROM_AD_eMP_10.02.11_001 Write : RM-1035_CUSTPACK_ROM_AD_EURO_DE_eMP_10.02.11_001 Write : RM-1035_JUMP_TABLE_AD_EURO_DE_eMP_10.02.11_001 Write : RM-1035_VIVA_eMP_10.02.11 CODE_DNLOAD : Ok [VERIFY] DONE : RM-1035_ROM_eMP_10.02.11 [VERIFY] DONE : RM-1035_LANG_PACK_ROM_AD_eMP_10.02.11_001 [VERIFY] DONE : RM-1035_CUSTPACK_ROM_AD_EURO_DE_eMP_10.02.11_001 [VERIFY] DONE : RM-1035_JUMP_TABLE_AD_EURO_DE_eMP_10.02.11_001 [VERIFY] DONE : RM-1035_VIVA_eMP_10.02.11 CODE_VERIFY : Ok Executing FFS FORMAT now... FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000 DA_RET : DA_IN_PROGRESS DA_RET : FORMAT_DONE Rebooting phone now |
SW version : 14.00.11 You need similar, or 13 or 12 |
Quote:
|
Quote:
|
nokia 1035 contactservice Quote:
|
Quote:
|
nokia 130 security damage |
Check device by Read RPL, if Ok -then try flash correct SW version to repair it. |
Need RM-1035 V14.00.11 flash please Not available on Navimanager Thanks |
flash v10.01.11 problem slove |
| All times are GMT +1. The time now is 03:01. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -