ta-1105 after flash recovry mode - GSM-Forum

blaw · 07-08-2020, 18:18

hi
i receive 5.1 plus TA-1105 with message corrupted software so i reflash with file in support but i get phone in recovry mode.

Code:

Card found : E929A281 , v0122
Infinity-Box BEST Nokia [HMD] Module [NK2] v1.20


Load : D:\5.1+PDA-214A-0-00WW-B01\PDA-214A-0-00WW-B01.nb0
Project  : PDA
SW_ver   : PDA-214A-0-00WW-B0
Platform : M6
SecVer   : 0x0004
Load Ok!

Operation : Flash Firmware [FTM] [ v1.20 ]
Setting   : UserData preserve : False
Setting   : FRP Reset    : True
Setting   : Change SKUID : False
Setting   : Keep SVC     : True

-> Old : Power Off Phone, wait 5-10 seconds, Insert USB cable 
-> New : Power Off Phone, press and hold VOL_DOWN and POWER keys, until FASTBOOT screen appear 

Wait for phone...

Device not found !
Check cable, connection and drivers!

Reconnect Power/Cable!

Load : D:\5.1+PDA-214A-0-00WW-B01\PDA-214A-0-00WW-B01.nb0
Load Ok!

Operation : Identify [ v1.20 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
 - > Info : Press and hold BOTH volume keys, if device boot fail at BROM stage!

Waiting for device connection ...

PTFN : MediaTek USB Port (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : DSLevel  : DEV_KEY+DEV_ARB
BROM : BOOTROM
BROM : ARB : ACTIVE : LOG : F0: 102B 0000  F3: 0000 0000 [0200]  V0: 0000 0000 [0001]
BROM : SOCID : 1C0E1A5F57D71CE038459538D98DF4DB6FF991BD13ECAF976D09F900644DABD3
AGENT : Look for suitable BootChain in DA ... 
AGENT : DEFAULT AUTO
AGENT : Found MT6771
AGENT : BEST_Nokia_DA_v19_1711_06
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0xC0000000 [ 3,00 GB ]

        EMMC: 90014A68423861503E01670191D765AD
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : hB8aP>
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x01000000 [ 16,00 MB ]
              USER   : 0x747C00000 [ 29,12 GB ]

        CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : F4015DC38B5662C7984CC7A2A37F6BC4

DA : USB : HIGH-SPEED

Boot done!

--- SysInfoSub [PART A]: 
Patch Level    : QP1A.190711.020
Display ID     : 00WW_3_11A
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2020-04-05
Build Time     : 1587038935
Product Info   : PDA
Product Board  : PDA
Board Platform : mt6771

--- SysInfoSub [PART B]: 
Patch Level    : PPR1.180610.011
Display ID     : 0001_2_20I
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2020-04-05
Build Time     : 1585662914
Product Model  : FIH-PDA
Product Brand  : alps
Product Name   : fih_mt6771_64_0001
Product Device : PDA_sprout
Product Manfct : alps
Product Info   : fih_mt6771_64
Product Board  : fih_mt6771_64
Board Platform : mt6771

--- SecuritySub : 
NVRAM check : Passed!

Backup sensetive data [ 11 ]
Backup path : Backup\MT6771__F4015DC38B5662C7984CC7A2A37F6BC4\
[18] Read : SUTINFO
[19] Read : ELABEL
[15] Read : PROINFO
[13] Read : PERSIST
[9] Read : NVRAM
[14] Read : SEC1
Backup done!


Done!
Elapsed: 00:00:34

Reconnect Power/Cable!

Operation : Write FW [ v1.20 ]

Setting   : UserData preserve : False
Setting   : Flash Pre-Erase   : True
Setting   : Bootloader update : True

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
 - > Info : Press and hold BOTH volume keys, if device boot fail at BROM stage!

Waiting for device connection ...

PTFN : MediaTek USB Port (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : DSLevel  : DEV_KEY+DEV_ARB
BROM : BOOTROM
BROM : ARB : ACTIVE : LOG : F0: 102B 0000  F3: 0000 0000 [0200]  V0: 0000 0000 [0001]
BROM : SOCID : 1C0E1A5F57D71CE038459538D98DF4DB6FF991BD13ECAF976D09F900644DABD3
AGENT : Look for suitable BootChain in DA ... 
AGENT : DEFAULT AUTO
AGENT : Found MT6771
AGENT : BEST_Nokia_DA_v19_1711_06
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0xC0000000 [ 3,00 GB ]

        EMMC: 90014A68423861503E01670191D765AD
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : hB8aP>
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x01000000 [ 16,00 MB ]
              USER   : 0x747C00000 [ 29,12 GB ]

        CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : F4015DC38B5662C7984CC7A2A37F6BC4

DA : USB : HIGH-SPEED

Boot done!

DL_INFO : PMT present
SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : HW verification passed!

Erase : 0x0000000000000000 : 0x0000000000108000
Erase : 0x0000000000188000 : 0x0000000001500000
Erase : 0x0000000003688000 : 0x0000000006000000
Erase : 0x000000000E800000 : 0x0000000000800000
Erase : 0x0000000012580000 : 0x0000000000800000
Erase : 0x0000000013DA0000 : 0x0000000001800000
Erase : 0x00000000156A0000 : 0x0000000002000000
Erase : 0x0000000018000000 : 0x00000000CE800000
Erase : 0x00000000E6900000 : 0x0000000002000000
Erase : 0x00000000E9800000 : 0x000000018E000000

PMT Update : OK

Flashing now ... 

PROCESS : PRELOADER
Unpack  : PDA-0-214A-0001-preloader_fih_mt6771_64.bin
Flash   : PDA-0-214A-0001-preloader_fih_mt6771_64.bin
Update bootloader backup copy ... 
Update bootloader backup copy Ok!

PROCESS : LOGO_A
Unpack  : PDA-0-214A-00WW-logo.bin
Flash   : PDA-0-214A-00WW-logo.bin

PROCESS : MD1IMG_A
Unpack  : PDA-0-214A-md1img.img
Flash   : PDA-0-214A-md1img.img

PROCESS : SPMFW_A
Unpack  : PDA-0-214A-spmfw.img
Flash   : PDA-0-214A-spmfw.img

PROCESS : SCP_A
Unpack  : PDA-0-214A-scp.img
Flash   : PDA-0-214A-scp.img

PROCESS : SSPM_A
Unpack  : PDA-0-214A-sspm.img
Flash   : PDA-0-214A-sspm.img

PROCESS : CAM_VPU1_A
Unpack  : PDA-0-214A-cam_vpu1.img
Flash   : PDA-0-214A-cam_vpu1.img

PROCESS : CAM_VPU2_A
Unpack  : PDA-0-214A-cam_vpu2.img
Flash   : PDA-0-214A-cam_vpu2.img

PROCESS : CAM_VPU3_A
Unpack  : PDA-0-214A-cam_vpu3.img
Flash   : PDA-0-214A-cam_vpu3.img

PROCESS : LK_A
Unpack  : PDA-0-214A-0001-lk_service.img
Flash   : PDA-0-214A-0001-lk_service.img

PROCESS : BOOT_A
Unpack  : PDA-0-214A-00WW-boot.img
Flash   : PDA-0-214A-00WW-boot.img

PROCESS : ODMDTBO_A
Unpack  : PDA-0-214A-odmdtbo.img
Flash   : PDA-0-214A-odmdtbo.img

PROCESS : TEE_A
Unpack  : PDA-0-214A-tee.img
Flash   : PDA-0-214A-tee.img

PROCESS : VENDOR_A
Unpack  : PDA-0-214A-00WW-vendor.img
Flash   : PDA-0-214A-00WW-vendor.img

PROCESS : SYSTEM_A
Unpack  : PDA-0-214A-00WW-system.img
Flash   : PDA-0-214A-00WW-system.img

PROCESS : USERDATA
Unpack  : PDA-0-214A-0001-userdata.img
Flash   : PDA-0-214A-0001-userdata.img

PMT Update : OK
SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

Flashing finished!

Done!
Elapsed: 00:05:52

blaw · 07-08-2020, 18:20

i try to hard reset but nothing change.maybe phone need latest firmware and in support erea we have only one file

blaw · 07-09-2020, 00:22

I think phone have Android 10 firmware.please infinity team Can upload this firmware in support erea

JayDi · 07-09-2020, 09:27

Hello! We will prepare and upload OTA unbrick file
and PDA-220G version to support today.

blaw · 07-09-2020, 16:50

stil wait brother yours files

blaw · 07-11-2020, 12:57

Quote:

Originally Posted by blaw

stil wait brother yours files

no files in support?
so to solve this problem after flash phone go to recovry mode.
need this file to update phone with sd card
nokia-5-1-plus-android-10-v3.11A

and phone finally work

shahzadthe1 · 10-12-2020, 06:21

Quote:

Originally Posted by blaw

no files in support?
so to solve this problem after flash phone go to recovry mode.
need this file to update phone with sd card
nokia-5-1-plus-android-10-v3.11A

and phone finally work

bro how did you solve the problem i have exact same problem , tried 3 files
phone stuck in no command screen , only recovery mode access
which file did you used pls help

pogp · 10-31-2020, 15:22

not working bro help me

07-08-2020, 18:20	#2 (permalink)
blaw No Life Poster Join Date: Dec 2006 Location: Tunisia Posts: 1,093 Member: 411207 Status: Offline Thanks Meter: 164	i try to hard reset but nothing change.maybe phone need latest firmware and in support erea we have only one file

07-09-2020, 00:22	#3 (permalink)
blaw No Life Poster Join Date: Dec 2006 Location: Tunisia Posts: 1,093 Member: 411207 Status: Offline Thanks Meter: 164	I think phone have Android 10 firmware.please infinity team Can upload this firmware in support erea

07-09-2020, 09:27	#4 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Hello! We will prepare and upload OTA unbrick file and PDA-220G version to support today.

07-09-2020, 16:50	#5 (permalink)
blaw No Life Poster Join Date: Dec 2006 Location: Tunisia Posts: 1,093 Member: 411207 Status: Offline Thanks Meter: 164	stil wait brother yours files

10-31-2020, 15:22	#8 (permalink)
pogp Freak Poster Join Date: Oct 2016 Posts: 123 Member: 2637597 Status: Offline Sonork: 100.1680047 Thanks Meter: 11	not working bro help me