Public discussion about Fenix Key v1.0.2 released - Page 3 - GSM-Forum

RNC_EBM · 03-01-2011, 05:59

Software version: 1.0.2
Detected card sn: RNC_EBM
Card version: 00.07
Life counter: 99.98%
Fenix Reader SW version: 0.0.2
Connection interface is set to USB now.

[ UFS CONNECTION ]
Connecting to UFS3 SarasSoft #1 (SN: RNC_EBM)
UFxBoot V2.2 (c) SarasSoft 2003
UFS_USB V2.8 (c) SarasSoft 2007
Connected to UFS interface.
Connection interface is set to UFS now.
Job's finished successfully!

[ INFO ]
Checking connection...
Powering on the phone
Reading phone info
Product type: RM-78
MCU SW Version:
V 06.43
30-03-07
RM-78
(c) Nokia
PPM Version:
V 06.43
30-03-07
RM-78
(c) Nokia
A
Imei: 35835xxxxxxxxxx
Product code: 0530259
Simlock status:
Profile bits: 8000000000000006
Config key: 2440700000000000
Fbus codes typed: 0
Key codes typed: 0
Block 1:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 2:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 3:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 4:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 5:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 6:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 7:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Looking for flash files
Flash files found for selected product
Job's finished successfully!

[ FLASHING ]
Flashing started
Reading important PM fields
Checking connection
Field received. ID = 308
PM backup saved as: D:\My Documents\Lavarow\Fenix\Backup\Pm\35835xxxxxxxxxx-3-1-2011 12-45-08 PM.pm
Setting flash mode
Reading CMT boot data...

CMT Boot Data
--------------
Asic ID : 000000010000022600010006010C192101003000
Public ID : 0EC0010694BD00540CF5E48172EBDFF08DFA61DB
Hash : BAF3A9C3DBFA8454937DB77F2B8852B1
Hardware ID: 010C192101003000

Booting CMT
Sending 2ND...
Sending Algo...

CMT Flash info:
Vendor : 0001 [SPANSION]
Product: 002F [72NS256N]
APE Flash info:
No APE Flash detected

Reading certificates
Reading NPC
Saving NPC
Reading VARIANT
Saving VARIANT
Reading CCC
CCC is empty
Reading HWC
HWC is empty
Certificates saved as: D:\My Documents\Lavarow\Fenix\Backup\Certs\3-1-2011 12-45-24 PM-3-1-2011 12-45-24 PM.rpl
Erasing MCUSW Flash area
Erasing CMT area 00000000 - 000202BF
Erasing CMT area 00020300 - 000252FF
Erasing CMT area 00020000 - 0007FFFF
Erasing CMT area 00080000 - 000DFFFF
Erasing CMT area 00200000 - 0037FFFF
Erasing CMT area 00380000 - 011DDFFF
Erasing CMT area 011DE000 - 011DEFFF
Erasing CMT area 011DF000 - 011DFFFF
Erasing CMT area 00100000 - 001FFFFF
Erasing PPM Flash area
Erasing CMT area 011E0000 - 016DFFFF
Erasing CNT Flash area
Erasing CMT area 016E0000 - 01FDFFFF
Flashing MCUSW
Sending NOLO
Sending KEYS
Sending PRIMAPP
Sending PASUBTOC
Sending PAPUBKEYS
Sending UPDAPP
Sending DSP0
Sending MCUSW
Sending PMM_CONF
Sending SBIF_CONF
Short delay between flash files
Flashing PPM
Short delay between flash files
Converting CNT 64kb-page file to 128kb-page file
Flashing CNT
Finishing loader session...
Powering the phone
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code [SKIPPED]
Job's finished successfully!

[ SET FACTORY ]
Checking connection...
Setting defaults...
Job's finished successfully!

[ UNLOCK THRU RPL ]
Unlocking started
Setting flash mode
Reading CMT boot data...

CMT Boot Data
--------------
Asic ID : 000000010000022600010006010C192101003000
Public ID : 0EC0010694BD00540CF5E48172EBDFF08DFA61DB
Hash : BAF3A9C3DBFA8454937DB77F2B8852B1
Hardware ID: 010C192101003000

Sending 2ND...
Initializing...
Booting loader...
Reading secure data...
Powering the phone
Writing RPL...
Job's finished successfully!

br

RNC_EBM

speed infotech · 03-01-2011, 06:41

5130 fbus flesh successfully thanks team

Software version: 1.0.2
Detected card sn: xxxxxxxxxxxxxxxx
Card version: 00.07
Life counter: 95.29%
Fenix Reader SW version: 0.0.2
Connection interface is set to USB now.
Connecting to UFS3 SarasSoft #1 (SN: 62397)
UFxBoot V2.2 (c) SarasSoft 2003
UFS_USB V2.8 (c) SarasSoft 2007
Connected to UFS interface.
Connection interface is set to UFS now.
Job's finished successfully!
Setting flash mode
Reading CMT boot data...

CMT Boot Data
--------------
Asic ID : 000000010000022600010006030C192101033000
Public ID : 12B00103CCE37D56EC3A4E89858007D8DE8C6836
Hash : 9DDBFCFE6E73CED7D8C6268C8EB85723
Hardware ID: 030C192101033000

Booting CMT
Sending 2ND...
Sending Algo...

CMT Flash info:
Vendor : 0089 [INTEL]
Product: 8982 [Unknown product]
APE Flash info:
No APE Flash detected

Job's finished successfully!
Looking for flash files
Flash files found for selected product
Flashing started
Reading important PM fields
Checking connection
Powering on the phone
Could not read SIMLOCK data. Flashing is being continued.
Setting flash mode
Reading CMT boot data...

CMT Boot Data
--------------
Asic ID : 000000010000022600010006030C192101033000
Public ID : 12B00103CCE37D56EC3A4E89858007D8DE8C6836
Hash : 9DDBFCFE6E73CED7D8C6268C8EB85723
Hardware ID: 030C192101033000

Booting CMT
Sending 2ND...
Sending Algo...

CMT Flash info:
Vendor : 0089 [INTEL]
Product: 8982 [Unknown product]
APE Flash info:
No APE Flash detected

Reading certificates
Reading NPC
Saving NPC
Reading VARIANT
VARIANT is empty
Reading CCC
Saving CCC
Reading HWC
Saving HWC
Certificates saved as: C:\Documents and Settings\Sitaram Mobile\My Documents\Lavarow\Fenix\Backup\Certs\3-1-2011 10-58-30 AM-3-1-2011 10-58-30 AM.rpl
Erasing MCUSW Flash area
Erasing CMT area 00000000 - 000006BF
Erasing CMT area 000006C0 - 0001FFFF
Erasing CMT area 00040000 - 000BFFFF
Erasing CMT area 000C0000 - 0013FFFF
Erasing CMT area 00140000 - 0137FFFF
Erasing CMT area 01380000 - 0151FFFF
Erasing PPM Flash area
Erasing CMT area 01520000 - 01DBFFFF
Erasing CNT Flash area
Erasing CMT area 01DC0000 - 0215FFFF
Erasing CMT area 02160000 - 03FBFFFF
Flashing MCUSW
Sending NOLO
Sending KEYS
Sending PRIMAPP
Sending PASUBTOC
Sending PAPUBKEYS
Sending UPDAPP
Sending DSP0
Sending MCUSW
Short delay between flash files
Flashing PPM
Short delay between flash files
Flashing CNT
Finishing loader session...
Powering the phone
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code [SKIPPED]
Job's finished successfully!

neo_49 · 03-01-2011, 07:05

Pls make support site with resume support downloads.
REGARDS

mamara · 03-01-2011, 09:23

Quote:

Originally Posted by Lavarow

Fenix Key v1.0.2 released

Fenix Key now supports f-bus flashing via UFS

What's new?

- Flashing via UFS for old-protocol phones - added (BB5 phones).
- Reading / Writing certificates via UFS for old-protocol phones - added (BB5 phones).
- Resetting life counter via USB/UFS - added (BB5 phones).
- Minor bugs fixed.

Update is free for all Fenix Key users. Enjoy!

Notice: Phones with double MCU (6630, 6680, 6681, N70, N72, N73, N75, N77, N90, N91, N92, N95, E90, N93, N93i, E60, E61, E65, E61i, E70, N80, N95-8Gb) are not supported for f-bus flashing yet.

Download link: https://rapidshare.com/files/450233825/FenixKey.zip

Download link 2: http://www.download.fenix-key.com/Fe...e/FenixKey.zip

BR,
Fenix Team

That was a niche market enjoyed by mx key alone for some time. That ended when fenix key was born. I think if mx dont come up with somethin new, that would the end of it. Keep going "fenix key". Fair competition is what customers need.

misujr · 03-01-2011, 09:42

Thank you Mr. Lavarow for the lifetimer reset option !

BR,
Misujr

speed infotech · 03-01-2011, 10:28

sir if posible to option

chack option

SUPERDONGLE_KEY
SIMLOCK
SECURITY

with usb cable for check that sd key currepted or not

silock data currepted or not

security data currepted or not

skyulock · 03-01-2011, 12:19

what the mean of Phones with double MCU.......................

Lavarow · 03-01-2011, 21:48

Quote:

Originally Posted by skyulock

what the mean of Phones with double MCU.......................

Thats mean all phones with APE (N73, N95, N95 8gb etc)

BR,
Lavarow

..::Sourav::.. · 03-02-2011, 06:50

Good update ...........

dani2080 · 03-02-2011, 10:03

Quote:

Originally Posted by lavarow

just like i promised we start work on jaf, and i think will be added very soon.

Br,
lavarow

great news.thanks lavarow,then i see u will have best support

from all of us.thx again.

ejaz007 · 03-02-2011, 14:51

many many thanks to lavarow team...........
for really nice update.................congrats to all the team........keep up the good work.....

i ll be waiting
1-DCT4 flashing using ufs interface,easy cable
2-SL3 phones downgrade.......

netpazillus · 03-02-2011, 20:30

Hello,
Fenixkey say you dont need fbus cable.
now i can flash with ufs and fbus cable?
i have ufs and if i wont flash with fbus i will flash it with sarasoft.
i think new update for sl3 (newer hash) is better.
sorry please dont kill me
mfg netpazillus

saif@cellplus · 03-03-2011, 07:41

5130 Restart successfully flashed wth Fenix key through UFS

Connection interface is set to USB now.
Connecting to UFS3 SarasSoft #1 (SN: 97081)
UFxBoot V2.2 (c) SarasSoft 2003
UFS_USB V2.8 (c) SarasSoft 2007
Connected to UFS interface.
Connection interface is set to UFS now.
Job's finished successfully!
Checking connection...
Powering on the phone
Reading phone info
Product type: RM-495
MCU SW Version:
V 07.97
13-09-10
RM-495
(c) Nokia
PPM Version:
V 07.97
13-09-10
RM-495
(c) Nokia
MH
Content Pack Version:
Content: mh_blu
V 07.97
13-09-10
RM-495
(c) Nokia
Imei: xxxxxxxxxxxxxxx
Product code: 0578246
Simlock status:
Profile bits: 0000000000000000
Config key: 0000000000000000
Fbus codes typed: 0
Key codes typed: 0
Looking for flash files
Flash files found for selected product
Job's finished successfully!
Flashing started
Reading important PM fields
Checking connection
Powering on the phone
Field received. ID = 120
Field received. ID = 308
PM backup saved as: C:\Documents and Settings\Administrator\My Documents\Lavarow\Fenix\Backup\Pm\xxxxxxxxxxxxxxx-3-3-2011 11-53-12 AM.pm
Setting flash mode
Reading CMT boot data...

CMT Boot Data
--------------
Asic ID : 000000010000022600010006030C192101033000
Public ID : 20C00008F8F5585092DB108A3080A5359159842B
Hash : 9DDBFCFE6E73CED7D8C6268C8EB85723
Hardware ID: 030C192101033000

Booting CMT
Sending 2ND...
Sending Algo...

CMT Flash info:
Vendor : 0089 [INTEL]
Product: 8982 [Unknown product]
APE Flash info:
No APE Flash detected

Reading certificates
Reading NPC
Saving NPC
Reading VARIANT
VARIANT is empty
Reading CCC
Saving CCC
Reading HWC
Saving HWC
Certificates saved as: C:\Documents and Settings\Administrator\My Documents\Lavarow\Fenix\Backup\Certs\3-3-2011 11-53-28 AM-3-3-2011 11-53-28 AM.rpl
Erasing MCUSW Flash area
Erasing CMT area 00000000 - 000006BF
Erasing CMT area 000006C0 - 0001FFFF
Erasing CMT area 00040000 - 000BFFFF
Erasing CMT area 000C0000 - 0013FFFF
Erasing CMT area 00140000 - 0137FFFF
Erasing CMT area 01380000 - 0151FFFF
Erasing PPM Flash area
Erasing CMT area 01520000 - 01DBFFFF
Erasing CNT Flash area
Erasing CMT area 01DC0000 - 0215FFFF
Erasing CMT area 02160000 - 03FBFFFF
Flashing MCUSW
Sending NOLO
Sending KEYS
Sending PRIMAPP
Sending PASUBTOC
MCU PAPUBKEYS are missing, sending first available block
Sending PAPUBKEYS
Sending UPDAPP
Sending DSP0
Sending MCUSW
Short delay between flash files
Flashing PPM
Short delay between flash files
Flashing CNT
Finishing loader session...
Powering the phone
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code: 0571906
Job's finished successfully!
Checking connection...
Powering on the phone
Reading phone info
Product type: RM-495
MCU SW Version:
V 07.97
13-09-10
RM-495
(c) Nokia
PPM Version:
V 07.97
13-09-10
RM-495
(c) Nokia
QA
Content Pack Version:
Content: qa_blu
V 07.97
13-09-10
RM-495
(c) Nokia
Imei: 35xxxxxxxxxxxxxxx
Product code: 0571906
Simlock status:
Profile bits: 0000000000000000
Config key: 2440700000000000
Fbus codes typed: 0
Key codes typed: 0
Block 1:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 2:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 3:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 4:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 5:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 6:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 7:
Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Looking for flash files
Flash files found for selected product
Job's finished successfully!

Regards,
Saif.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I neeeeed NCDS 2.0!!!! plzz!!!!	ratzfatz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	02-27-2022 22:12
DES key Driver	black	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	02-08-2014 04:50
Need info for unliocking 2 lock (with pic microprocesors)	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-26-1999 01:00

03-01-2011, 05:59	#31 (permalink)
RNC_EBM No Life Poster Join Date: Dec 2004 Location: PHILIPPINES Posts: 5,294 Member: 101860 Status: Offline Sonork: 100.1582168 100.77603 Thanks Meter: 6,036	Software version: 1.0.2 Detected card sn: RNC_EBM Card version: 00.07 Life counter: 99.98% Fenix Reader SW version: 0.0.2 Connection interface is set to USB now. [ UFS CONNECTION ] Connecting to UFS3 SarasSoft #1 (SN: RNC_EBM) UFxBoot V2.2 (c) SarasSoft 2003 UFS_USB V2.8 (c) SarasSoft 2007 Connected to UFS interface. Connection interface is set to UFS now. Job's finished successfully! [ INFO ] Checking connection... Powering on the phone Reading phone info Product type: RM-78 MCU SW Version: V 06.43 30-03-07 RM-78 (c) Nokia PPM Version: V 06.43 30-03-07 RM-78 (c) Nokia A Imei: 35835xxxxxxxxxx Product code: 0530259 Simlock status: Profile bits: 8000000000000006 Config key: 2440700000000000 Fbus codes typed: 0 Key codes typed: 0 Block 1: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 2: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 3: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 4: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 5: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 6: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 7: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Looking for flash files Flash files found for selected product Job's finished successfully! [ FLASHING ] Flashing started Reading important PM fields Checking connection Field received. ID = 308 PM backup saved as: D:\My Documents\Lavarow\Fenix\Backup\Pm\35835xxxxxxxxxx-3-1-2011 12-45-08 PM.pm Setting flash mode Reading CMT boot data... CMT Boot Data -------------- Asic ID : 000000010000022600010006010C192101003000 Public ID : 0EC0010694BD00540CF5E48172EBDFF08DFA61DB Hash : BAF3A9C3DBFA8454937DB77F2B8852B1 Hardware ID: 010C192101003000 Booting CMT Sending 2ND... Sending Algo... CMT Flash info: Vendor : 0001 [SPANSION] Product: 002F [72NS256N] APE Flash info: No APE Flash detected Reading certificates Reading NPC Saving NPC Reading VARIANT Saving VARIANT Reading CCC CCC is empty Reading HWC HWC is empty Certificates saved as: D:\My Documents\Lavarow\Fenix\Backup\Certs\3-1-2011 12-45-24 PM-3-1-2011 12-45-24 PM.rpl Erasing MCUSW Flash area Erasing CMT area 00000000 - 000202BF Erasing CMT area 00020300 - 000252FF Erasing CMT area 00020000 - 0007FFFF Erasing CMT area 00080000 - 000DFFFF Erasing CMT area 00200000 - 0037FFFF Erasing CMT area 00380000 - 011DDFFF Erasing CMT area 011DE000 - 011DEFFF Erasing CMT area 011DF000 - 011DFFFF Erasing CMT area 00100000 - 001FFFFF Erasing PPM Flash area Erasing CMT area 011E0000 - 016DFFFF Erasing CNT Flash area Erasing CMT area 016E0000 - 01FDFFFF Flashing MCUSW Sending NOLO Sending KEYS Sending PRIMAPP Sending PASUBTOC Sending PAPUBKEYS Sending UPDAPP Sending DSP0 Sending MCUSW Sending PMM_CONF Sending SBIF_CONF Short delay between flash files Flashing PPM Short delay between flash files Converting CNT 64kb-page file to 128kb-page file Flashing CNT Finishing loader session... Powering the phone Doing post - flashing procedures Setting defaults: Set Factory Setting product code [SKIPPED] Job's finished successfully! [ SET FACTORY ] Checking connection... Setting defaults... Job's finished successfully! [ UNLOCK THRU RPL ] Unlocking started Setting flash mode Reading CMT boot data... CMT Boot Data -------------- Asic ID : 000000010000022600010006010C192101003000 Public ID : 0EC0010694BD00540CF5E48172EBDFF08DFA61DB Hash : BAF3A9C3DBFA8454937DB77F2B8852B1 Hardware ID: 010C192101003000 Sending 2ND... Initializing... Booting loader... Reading secure data... Powering the phone Writing RPL... Job's finished successfully! br RNC_EBM

03-01-2011, 06:41	#32 (permalink)
speed infotech No Life Poster Join Date: Feb 2007 Location: India Posts: 1,221 Member: 449060 Status: Offline Sonork: 100.1670591 Thanks Meter: 260	5130 fbus flesh successfully thanks team Software version: 1.0.2 Detected card sn: xxxxxxxxxxxxxxxx Card version: 00.07 Life counter: 95.29% Fenix Reader SW version: 0.0.2 Connection interface is set to USB now. Connecting to UFS3 SarasSoft #1 (SN: 62397) UFxBoot V2.2 (c) SarasSoft 2003 UFS_USB V2.8 (c) SarasSoft 2007 Connected to UFS interface. Connection interface is set to UFS now. Job's finished successfully! Setting flash mode Reading CMT boot data... CMT Boot Data -------------- Asic ID : 000000010000022600010006030C192101033000 Public ID : 12B00103CCE37D56EC3A4E89858007D8DE8C6836 Hash : 9DDBFCFE6E73CED7D8C6268C8EB85723 Hardware ID: 030C192101033000 Booting CMT Sending 2ND... Sending Algo... CMT Flash info: Vendor : 0089 [INTEL] Product: 8982 [Unknown product] APE Flash info: No APE Flash detected Job's finished successfully! Looking for flash files Flash files found for selected product Flashing started Reading important PM fields Checking connection Powering on the phone Could not read SIMLOCK data. Flashing is being continued. Setting flash mode Reading CMT boot data... CMT Boot Data -------------- Asic ID : 000000010000022600010006030C192101033000 Public ID : 12B00103CCE37D56EC3A4E89858007D8DE8C6836 Hash : 9DDBFCFE6E73CED7D8C6268C8EB85723 Hardware ID: 030C192101033000 Booting CMT Sending 2ND... Sending Algo... CMT Flash info: Vendor : 0089 [INTEL] Product: 8982 [Unknown product] APE Flash info: No APE Flash detected Reading certificates Reading NPC Saving NPC Reading VARIANT VARIANT is empty Reading CCC Saving CCC Reading HWC Saving HWC Certificates saved as: C:\Documents and Settings\Sitaram Mobile\My Documents\Lavarow\Fenix\Backup\Certs\3-1-2011 10-58-30 AM-3-1-2011 10-58-30 AM.rpl Erasing MCUSW Flash area Erasing CMT area 00000000 - 000006BF Erasing CMT area 000006C0 - 0001FFFF Erasing CMT area 00040000 - 000BFFFF Erasing CMT area 000C0000 - 0013FFFF Erasing CMT area 00140000 - 0137FFFF Erasing CMT area 01380000 - 0151FFFF Erasing PPM Flash area Erasing CMT area 01520000 - 01DBFFFF Erasing CNT Flash area Erasing CMT area 01DC0000 - 0215FFFF Erasing CMT area 02160000 - 03FBFFFF Flashing MCUSW Sending NOLO Sending KEYS Sending PRIMAPP Sending PASUBTOC Sending PAPUBKEYS Sending UPDAPP Sending DSP0 Sending MCUSW Short delay between flash files Flashing PPM Short delay between flash files Flashing CNT Finishing loader session... Powering the phone Doing post - flashing procedures Setting defaults: Set Factory Setting product code [SKIPPED] Job's finished successfully!

03-01-2011, 07:05	#33 (permalink)
neo_49 No Life Poster Join Date: Aug 2006 Location: Back to GSM from AV Posts: 944 Member: 325999 Status: Offline Thanks Meter: 113	Pls make support site with resume support downloads. REGARDS

03-01-2011, 09:42	#35 (permalink)
misujr Junior Member Join Date: Feb 2007 Location: Bucharest Age: 34 Posts: 14 Member: 450581 Status: Offline Thanks Meter: 3	Thank you Mr. Lavarow for the lifetimer reset option ! BR, Misujr

03-01-2011, 10:28	#36 (permalink)
speed infotech No Life Poster Join Date: Feb 2007 Location: India Posts: 1,221 Member: 449060 Status: Offline Sonork: 100.1670591 Thanks Meter: 260	sir if posible to option chack option SUPERDONGLE_KEY SIMLOCK SECURITY with usb cable for check that sd key currepted or not silock data currepted or not security data currepted or not

03-01-2011, 12:19	#37 (permalink)
skyulock No Life Poster Join Date: Apr 2008 Location: nigeria Posts: 1,307 Member: 757064 Status: Offline Sonork: 11111111 Thanks Meter: 365	what the mean of Phones with double MCU.......................

03-02-2011, 06:50	#39 (permalink)
..::Sourav::.. Freak Poster Join Date: Aug 2009 Location: UnSupported Device Age: 35 Posts: 395 Member: 1101631 Status: Offline Sonork: 100.1604605 Thanks Meter: 68	Good update ...........

03-02-2011, 14:51	#41 (permalink)
ejaz007 Major Poster Join Date: Jan 2011 Location: Lahore Pakistan Posts: 42 Member: 1500891 Status: Offline Thanks Meter: 6	many many thanks to lavarow team........... for really nice update.................congrats to all the team........keep up the good work..... i ll be waiting 1-DCT4 flashing using ufs interface,easy cable 2-SL3 phones downgrade.......

03-02-2011, 20:30	#42 (permalink)
netpazillus Junior Member Join Date: Jul 2005 Age: 56 Posts: 24 Member: 165649 Status: Offline Thanks Meter: 3	Hello, Fenixkey say you dont need fbus cable. now i can flash with ufs and fbus cable? i have ufs and if i wont flash with fbus i will flash it with sarasoft. i think new update for sl3 (newer hash) is better. sorry please dont kill me mfg netpazillus

03-03-2011, 07:41	#43 (permalink)
saif@cellplus No Life Poster Join Date: Apr 2003 Location: INTERNET-INDIA Posts: 683 Member: 26488 Status: Offline Sonork: 100.1581233 Thanks Meter: 151	5130 Restart successfully flashed wth Fenix key through UFS Connection interface is set to USB now. Connecting to UFS3 SarasSoft #1 (SN: 97081) UFxBoot V2.2 (c) SarasSoft 2003 UFS_USB V2.8 (c) SarasSoft 2007 Connected to UFS interface. Connection interface is set to UFS now. Job's finished successfully! Checking connection... Powering on the phone Reading phone info Product type: RM-495 MCU SW Version: V 07.97 13-09-10 RM-495 (c) Nokia PPM Version: V 07.97 13-09-10 RM-495 (c) Nokia MH Content Pack Version: Content: mh_blu V 07.97 13-09-10 RM-495 (c) Nokia Imei: xxxxxxxxxxxxxxx Product code: 0578246 Simlock status: Profile bits: 0000000000000000 Config key: 0000000000000000 Fbus codes typed: 0 Key codes typed: 0 Looking for flash files Flash files found for selected product Job's finished successfully! Flashing started Reading important PM fields Checking connection Powering on the phone Field received. ID = 120 Field received. ID = 308 PM backup saved as: C:\Documents and Settings\Administrator\My Documents\Lavarow\Fenix\Backup\Pm\xxxxxxxxxxxxxxx-3-3-2011 11-53-12 AM.pm Setting flash mode Reading CMT boot data... CMT Boot Data -------------- Asic ID : 000000010000022600010006030C192101033000 Public ID : 20C00008F8F5585092DB108A3080A5359159842B Hash : 9DDBFCFE6E73CED7D8C6268C8EB85723 Hardware ID: 030C192101033000 Booting CMT Sending 2ND... Sending Algo... CMT Flash info: Vendor : 0089 [INTEL] Product: 8982 [Unknown product] APE Flash info: No APE Flash detected Reading certificates Reading NPC Saving NPC Reading VARIANT VARIANT is empty Reading CCC Saving CCC Reading HWC Saving HWC Certificates saved as: C:\Documents and Settings\Administrator\My Documents\Lavarow\Fenix\Backup\Certs\3-3-2011 11-53-28 AM-3-3-2011 11-53-28 AM.rpl Erasing MCUSW Flash area Erasing CMT area 00000000 - 000006BF Erasing CMT area 000006C0 - 0001FFFF Erasing CMT area 00040000 - 000BFFFF Erasing CMT area 000C0000 - 0013FFFF Erasing CMT area 00140000 - 0137FFFF Erasing CMT area 01380000 - 0151FFFF Erasing PPM Flash area Erasing CMT area 01520000 - 01DBFFFF Erasing CNT Flash area Erasing CMT area 01DC0000 - 0215FFFF Erasing CMT area 02160000 - 03FBFFFF Flashing MCUSW Sending NOLO Sending KEYS Sending PRIMAPP Sending PASUBTOC MCU PAPUBKEYS are missing, sending first available block Sending PAPUBKEYS Sending UPDAPP Sending DSP0 Sending MCUSW Short delay between flash files Flashing PPM Short delay between flash files Flashing CNT Finishing loader session... Powering the phone Doing post - flashing procedures Setting defaults: Set Factory Setting product code: 0571906 Job's finished successfully! Checking connection... Powering on the phone Reading phone info Product type: RM-495 MCU SW Version: V 07.97 13-09-10 RM-495 (c) Nokia PPM Version: V 07.97 13-09-10 RM-495 (c) Nokia QA Content Pack Version: Content: qa_blu V 07.97 13-09-10 RM-495 (c) Nokia Imei: 35xxxxxxxxxxxxxxx Product code: 0571906 Simlock status: Profile bits: 0000000000000000 Config key: 2440700000000000 Fbus codes typed: 0 Key codes typed: 0 Block 1: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 2: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 3: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 4: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 5: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 6: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Block 7: Lock 1: OPEN(IMSI); TYPE: 5; DATA: FF FF FF Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF Looking for flash files Flash files found for selected product Job's finished successfully! Regards, Saif.