mars cable not working - GSM-Forum

livewirecebu · 12-24-2002, 15:38

my mars cable i bought is not working? Does anyone know where the schematic of this cable can be found? Or are there many kinds of cable for mars?

Tnx

Danchik · 12-24-2002, 16:32

There are 2 different cables for Mars ! ! for Flashing and 1 for unlocking ! Wich cable you need ?

-=SanSanyc=- · 12-24-2002, 19:14

Danchik Right. I long time have this problem, but after build two cable for flash and unlock from www.gsmhacking.com all Work Fine. 100%

Dont modify this shematics. Trust me.

Danchik · 12-25-2002, 00:29

Actualy I am using One cable With the small Trick

livewirecebu · 12-25-2002, 02:27

well i dont know what cable i have here but i cant unlock fones. I believe this is not for flashing because it doesnt have an interface for an external source.

it tells me about a protocol problem -8.

im new here in mitsubishi unlocking. i hope i can make this thing run by a little modification of some pinouts.

HFP · 12-25-2002, 09:34

Im use flash cable for unlock and flashing.....
PS.without "tricks"-))

livewirecebu · 12-25-2002, 10:55

i believe i got defective cable. i open the circuit and found a 74LS14 chip instead of a max232 inside per what the diagram of gsmhacking.com posted in the schematic portion.

I always get the error

Could not enter test mode
Error in TM_OpenlinkTm: -8 (Protocol Problem)

Can anyone tell me what does this mean?

Thank you.

Danchik · 12-26-2002, 22:57

Try to built cable by your self ! Shems you can find in the link above !!

12-24-2002, 15:38	#1 (permalink)
livewirecebu No Life Poster Join Date: Sep 2002 Location: Cebu, Philippines Posts: 937 Member: 15652 Status: Offline Thanks Meter: 344	mars cable not working my mars cable i bought is not working? Does anyone know where the schematic of this cable can be found? Or are there many kinds of cable for mars? Tnx

12-25-2002, 02:27	#5 (permalink)
livewirecebu No Life Poster Join Date: Sep 2002 Location: Cebu, Philippines Posts: 937 Member: 15652 Status: Offline Thanks Meter: 344	well i dont know what cable i have here but i cant unlock fones. I believe this is not for flashing because it doesnt have an interface for an external source. it tells me about a protocol problem -8. im new here in mitsubishi unlocking. i hope i can make this thing run by a little modification of some pinouts. Last edited by livewirecebu; 12-25-2002 at 02:45.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
z800i + Cable Not working. TMS - Test Cable not doing anything	versamps	TOTAL MultiServer	1	07-07-2005 20:34
SOS, MotoKEY + RoEMMI, 2 cables not working	dannyogolo	Motorola Old Legacy (EMMI)	0	08-21-2003 19:01
GD92 data cable not working for GD67 GPRS modem	lolklol	Panasonic	6	07-01-2003 15:47
Why T191 unlocking cable not work with DMTools?	andrews	Motorola ODM	36	06-10-2002 16:51
t28 cable not working	sdimitri	Old Ericsson Phones & Sony Phones	5	07-17-2001 09:00

12-24-2002, 16:32	#2 (permalink)
Danchik No Life Poster Join Date: Jun 2001 Location: Moscow Age: 40 Posts: 730 Member: 5014 Status: Offline Thanks Meter: 0	There are 2 different cables for Mars ! ! for Flashing and 1 for unlocking ! Wich cable you need ?

12-24-2002, 19:14	#3 (permalink)
-=SanSanyc=- Freak Poster Join Date: Aug 2002 Location: CZ: Praga, BY: Minsk Age: 56 Posts: 448 Member: 14640 Status: Offline Thanks Meter: 0	Danchik Right. I long time have this problem, but after build two cable for flash and unlock from www.gsmhacking.com all Work Fine. 100% Dont modify this shematics. Trust me.

12-25-2002, 00:29	#4 (permalink)
Danchik No Life Poster Join Date: Jun 2001 Location: Moscow Age: 40 Posts: 730 Member: 5014 Status: Offline Thanks Meter: 0	Actualy I am using One cable With the small Trick

12-25-2002, 09:34	#6 (permalink)
HFP No Life Poster Join Date: Mar 2001 Location: Ukraine,Kiev Age: 48 Posts: 1,605 Member: 3529 Status: Offline Thanks Meter: 1	Im use flash cable for unlock and flashing..... PS.without "tricks"-))

12-25-2002, 10:55	#7 (permalink)
livewirecebu No Life Poster Join Date: Sep 2002 Location: Cebu, Philippines Posts: 937 Member: 15652 Status: Offline Thanks Meter: 344	i believe i got defective cable. i open the circuit and found a 74LS14 chip instead of a max232 inside per what the diagram of gsmhacking.com posted in the schematic portion. I always get the error Could not enter test mode Error in TM_OpenlinkTm: -8 (Protocol Problem) Can anyone tell me what does this mean? Thank you.

12-26-2002, 22:57	#8 (permalink)
Danchik No Life Poster Join Date: Jun 2001 Location: Moscow Age: 40 Posts: 730 Member: 5014 Status: Offline Thanks Meter: 0	Try to built cable by your self ! Shems you can find in the link above !!