Trium "permanently blocked" solution - GSM-Forum

poki f · 07-24-2001, 14:13

Is there an EEPROM solution for this problem?
I already tried MS Tools, but it won't work.
(Trium Astral)

wazl · 07-24-2001, 19:57

Hi poki f,
you have post the same topic for 2 times !!
I have delete one of them so don´t wonder.

Read old topics to solve your problem

wazl

poki f · 07-25-2001, 07:25

Sorry for double-posting!

poki f · 07-25-2001, 07:33

Well, I looked through old topics, but did not found any solution for my trouble...
Maybe my cable is wrong, and MS tools don't
worh for that reason?
I use the following pinout: 3-tx 14-rx 10,15-gnd. Unlocking works (with old skkeptik for mars&galaxy). It seems to me that phone dose not communicate with PC, yet, it can receive commands from it...

ARS · 07-25-2001, 11:18

if you dont have backup of eeprom, upload eeprom from working phone, then flash it. For flashing you need another cable. In older topics you can find all about flashing.
Regards ARS

07-24-2001, 14:13	#1 (permalink)
poki f Junior Member Join Date: Jul 2001 Posts: 11 Member: 5103 Status: Offline Thanks Meter: 0	Trium "permanently blocked" solution Is there an EEPROM solution for this problem? I already tried MS Tools, but it won't work. (Trium Astral)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I have two Bosch 509 and Bosch 909 both are "permanently blocked"	DrMobile	Various	12	06-25-2005 19:20
509 "Permanently Blocked"	-=G3=-	Various	4	01-20-2002 17:52
tcd168/cx "permanently blocked"???? :(	Andrey	Philips	5	11-10-2001 14:05
aria "permanently blocked"	aklishin	Mitsubishi	2	05-11-2001 08:42

07-24-2001, 19:57	#2 (permalink)
wazl VIP-Member Join Date: Feb 2001 Location: any where Age: 55 Posts: 2,182 Member: 3222 Status: Offline Thanks Meter: 86	Hi poki f, you have post the same topic for 2 times !! I have delete one of them so don´t wonder. Read old topics to solve your problem wazl

07-25-2001, 07:25	#3 (permalink)
poki f Junior Member Join Date: Jul 2001 Posts: 11 Member: 5103 Status: Offline Thanks Meter: 0	Sorry for double-posting!

07-25-2001, 07:33	#4 (permalink)
poki f Junior Member Join Date: Jul 2001 Posts: 11 Member: 5103 Status: Offline Thanks Meter: 0	Well, I looked through old topics, but did not found any solution for my trouble... Maybe my cable is wrong, and MS tools don't worh for that reason? I use the following pinout: 3-tx 14-rx 10,15-gnd. Unlocking works (with old skkeptik for mars&galaxy). It seems to me that phone dose not communicate with PC, yet, it can receive commands from it...

07-25-2001, 11:18	#5 (permalink)
ARS No Life Poster Join Date: Dec 2000 Location: Slovakia, Brezno Posts: 980 Member: 2721 Status: Offline Thanks Meter: 23	if you dont have backup of eeprom, upload eeprom from working phone, then flash it. For flashing you need another cable. In older topics you can find all about flashing. Regards ARS