A21S EMMC KMDH6001DA-B422 repair done - GSM-Forum

zaki_barika · 10-26-2022, 16:34

first phone in condition
Load Boot images invalid Magic
and not accept any firmware

Samsung factory firmware not work

Quote:

Selected pit file: E:/Samsung/Samfw.com_SM-A217F_MID_A217FXXU8DVG4_fac_2/A21S_EUR_OPEN.pit

Open file: E:/Samsung/Samfw.com_SM-A217F_MID_A217FXXU8DVG4_fac_2/BL_A217FXXU8DVG4_CL24202344_QB54358579_REV00_user_ low_ship_MULTI_CERT.tar.md5

Switched to user area.
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...
ERROR[012]: Write error.
At sector 0.
Disconnected.

factory format not work

Quote:

Factory Format will erase all eMMC data!
Do you want to continue? Yes.
Formating...Failed.

after emmc firmware

Quote:

Writing eMMC firmware from file: C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/KMDH6001DA-B422(DH6DAB) _VCT0_00000000000000000000000000000000_8_0_R1_16_1 0_47__BY_SURIYAS1.BIN...Done.
Finalizing...Done.
Write CID succesfully completed.
Disconnected.
EMMC writing firmware Done.
SW: 2.2.4.7; FW: 1.24.

write boot again

Quote:

Selected pit file: E:/Samsung/Samfw.com_SM-A217F_MID_A217FXXU8DVG4_fac_2/A21S_EUR_OPEN.pit

Open file: E:/Samsung/Samfw.com_SM-A217F_MID_A217FXXU8DVG4_fac_2/BL_A217FXXU8DVG4_CL24202344_QB54358579_REV00_user_ low_ship_MULTI_CERT.tar.md5

Switched to user area.
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...

Switched to boot area partition 1.
Writing partition BOOTLOADER... from 0 to 823 Done.

Switched to user area.
Writing partition PARAM... from 1E000 to 560 Done.
Writing partition LDFW... from 34000 to 247 Done.
Writing partition TZSW... from 38000 to 4E0 Done.
Writing partition TZAR... from 38C00 to 143F Done.
Writing partition KEYSTORAGE... from 3C000 to B Done.
Writing partition UP_PARAM... from 3CC00 to 560 Done.
Writing partition VBMETA... from 92C00 to 7 Done.
Writing is finished.
SW: 2.2.4.7; FW: 1.24.
Disconnected.

write sec backup

Quote:

Partition table has been found on device.
Don't forget to reconnect the device after writing to see changes.
Writting partitions. Please wait...
Writing partition efs from E:/Samsung/Samfw.com_SM-A217F_MID_A217FXXU8DVG4_fac_2/efs_PhysPart_0_26_10_2022_10_29_16.bin file... Done.
Writing partition sec_efs from E:/Samsung/Samfw.com_SM-A217F_MID_A217FXXU8DVG4_fac_2/sec_efs_PhysPart_0_26_10_2022_10_29_24.bin file... Done.
Writing partition cpefs from E:/Samsung/Samfw.com_SM-A217F_MID_A217FXXU8DVG4_fac_2/cpefs_PhysPart_0_26_10_2022_10_29_32.bin file... Done.
Writing partition param from E:/Samsung/Samfw.com_SM-A217F_MID_A217FXXU8DVG4_fac_2/param_PhysPart_0_26_10_2022_10_29_35.bin file... Done.
Writing is finished.
SW: 2.2.4.7; FW: 1.24.
Reconnect the device to see changes.

and flash with odin done
https://ibb.co/pQsWV43

taheri · 12-06-2022, 15:03

which socket should I use for this eMMC?

Medusa Box · 12-09-2022, 15:32

Hello

What operation do you want to perform?

12-06-2022, 15:03	#2 (permalink)
taheri Insane Poster Join Date: Jan 2007 Location: Tehran Age: 43 Posts: 69 Member: 434737 Status: Offline Thanks Meter: 12	which socket should I use for this eMMC?

12-09-2022, 15:32	#3 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	Hello What operation do you want to perform?