a325f u6 error 11 and 12 [Answered]

[blackie06]

Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-A305F
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-A305F_EMMC_BY_STARKRIMES.srf
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Samsung eMMC CUTA42
Page size : 512 B
Block size : 512 B
Block count : 122142720
Size : 58.24 GB (59640.00 MB)
---------------------------------------------------------------
CID Info

CID : 1501004355544134320083D55B256615
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : CUTA42
Full name one from : KLMCG2UCTA-B041
Product revision : 0.0
Product serial number : (hex) 83D55B25
Manufacturing date : 06/2019
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes

Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 4Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x01) 00000001
Boot bus width : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x01) RST_n signal is permanently enabled

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 20357120 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/CUTA42_14_04_2022_17_42_42.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.4.3; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: bota0 (00002000, 00002000) 4 MB
P02: bota1 (00004000, 00004000) 8 MB
P03: efs (00008000, 0000A000) 20 MB
P04: sec_efs (00012000, 0000A000) 20 MB
P05: cpefs (0001C000, 00004000) 8 MB
P06: bota2 (00020000, 00004000) 8 MB
P07: cm (00024000, 00004000) 8 MB
P08: m9kefs1 (00028000, 00002000) 4 MB
P09: m9kefs2 (0002A000, 00002000) 4 MB
P10: m9kefs3 (0002C000, 00002000) 4 MB
P11: nad_refer (0002E000, 00000800) 1024 KB
P12: param (0002E800, 00004000) 8 MB
P13: up_param (00032800, 00004000) 8 MB
P14: misc (00036800, 00001000) 2048 KB
P15: boot (00037800, 00012000) 36 MB
P16: recovery (00049800, 0001A800) 53 MB
P17: dtb (00064000, 00004000) 8 MB
P18: dtbo (00068000, 00004000) 8 MB
P19: radio (0006C000, 00016800) 45 MB
P20: persistent (00082800, 00000400) 512 KB
P21: steady (00082C00, 00002000) 4 MB
P22: vbmeta (00084C00, 00000400) 512 KB
P23: bota3 (00085000, 00000400) 512 KB
P24: reserved2 (00085400, 00002C00) 5.5 MB
P25: system (00088000, 00960000) 4.688 GB
P26: vendor (009E8000, 0011C000) 568 MB
P27: product (00B04000, 000C8000) 400 MB
P28: cache (00BCC000, 000C8000) 400 MB
P29: omr (00C94000, 00019000) 50 MB
P30: cp_debug (00CAD000, 00002800) 5 MB
P31: nad_fw (00CAF800, 0000A000) 20 MB
P32: userdata (00CB9800, 067C0000) 51.88 GB
Backuping efs partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/CUTA42_efs_0x8000_0xa000_14_04_2022_17_42_42.bin file...
Reading. Please wait...
ERROR[011]: Read error.


Attempting to read...

ERROR[011]: Read error.

Attempting to read...

ERROR[011]: Read error.

Attempting to read...
Done.
Elapsed time 00:00:47
SW: 2.2.4.3; FW: 1.24.
Backuping cpefs partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/CUTA42_cpefs_0x1c000_0x4000_14_04_2022_17_42_42.bi n file...
Reading. Please wait...
ERROR[011]: Read error.

Attempting to read...
Done.
Elapsed time 00:00:16
SW: 2.2.4.3; FW: 1.24.

---------------------------------------------------------------
Searching Android build info...
Ok

Disk/Image size : 8f800000 bytes
Device sector size : 512 bytes
Partition offset : 557056
Number of sectors : 9830400
Build ID : RP1A.200720.012
Display Build ID : RP1A.200720.012.A305FDDU6CUI3
Release ID : 11
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : a30dd-user 11 RP1A.200720.012 A305FDDU6CUI3 release-keys

---------------------------------------------------------------

[Medusa Box]

Hello.

Try to repeat operation once again and post here results.

Before operation disconnect all third party devices from PC (other phones, modems, boxes, etc.) and connect the box directly to USB port of PC motherboard.