E15i unlock problem [Solved] - GSM-Forum

kashif_faiz · 01-18-2012, 12:39

whats this problem

Unlocking. Please wait...
ERROR[018]: Logical block operation failed at 1152 Kb (Hex address 0x00120000). Reason: Connection lost.
ERROR[018]: Logical block operation failed at 0 Kb (Hex address 0x00000000). Reason: Connection lost.

Medusa Box · 01-18-2012, 13:41

Hello.
What software version do You use? What power supply do You use for powering the device?
Aslo please post here full software log with all of your actions.

OHIIM · 01-19-2012, 20:37

se this e15 trying to repair
device power supply.
Medusa JTAG Firmware version 1.0.9.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 203C00E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.56 V
CPU : Qualcomm MSM7227
Core ID : 203C00E1
ERROR[002]: Failed to load Medusa Device Server to target RAM.
ERROR[035]: Target device has been powered off during connect.
Medusa JTAG Firmware version 1.0.9.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 203C00E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.9 V
CPU : Qualcomm MSM7227
Core ID : 203C00E1
ERROR[002]: Failed to load Medusa Device Server to target RAM.
ERROR[035]: Target device has been powered off during connect.
Medusa JTAG Firmware version 1.0.9.
Medusa JTAG Hardware S64 revision B.
MI: Medusa JTAG init failed.
ERROR[035]: Target device has been powered off during connect.
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.0.9.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 203C00E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.54 V
CPU : Qualcomm MSM7227
Core ID : 203C00E1
ERROR[002]: Failed to load Medusa Device Server to target RAM.
ERROR[035]: Target device has been powered off during connect.
Medusa JTAG Firmware version 1.0.9.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 203C00E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.23 V
CPU : Qualcomm MSM7227
Core ID : 203C00E1
ERROR[002]: Failed to load Medusa Device Server to target RAM.
ERROR[035]: Target device has been powered off during connect.
Medusa JTAG Firmware version 1.0.9.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 203C00E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.25 V
CPU : Qualcomm MSM7227
Core ID : 203C00E1
ERROR[002]: Failed to load Medusa Device Server to target RAM.
ERROR[035]: Target device has been powered off during connect.
Medusa JTAG Firmware version 1.0.9.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 203C00E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 1.86 V
CPU : Qualcomm MSM7227
Core ID : 203C00E1
ERROR[002]: Failed to load Medusa Device Server to target RAM.
ERROR[035]: Target device has been powered off during connect.
Medusa JTAG Firmware version 1.0.9.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 203C00E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 1.44 V
CPU : Qualcomm MSM7227
Core ID : 203C00E1
ERROR[002]: Failed to load Medusa Device Server to target RAM.
ERROR[035]: Target device has been powered off during connect.
Medusa JTAG Firmware version 1.0.9.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 203C00E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 1.49 V
CPU : Qualcomm MSM7227
Core ID : 203C00E1
ERROR[002]: Failed to load Medusa Device Server to target RAM.
ERROR[035]: Target device has been powered off during connect.

LokitoFlasheo · 01-19-2012, 22:48

please use dual conection battery and cable usb 100% tested

Medusa Box · 01-20-2012, 08:05

Also please use the latest software version.

raphael.aranha · 01-21-2012, 03:34

Man I had the same problem , drives were the problem , good lock

OHIIM · 01-22-2012, 11:46

Oaky.... Thanks for help problem solved

01-18-2012, 12:39	#1 (permalink)
kashif_faiz Freak Poster Join Date: Dec 2008 Location: smart- key Posts: 189 Member: 917810 Status: Offline Thanks Meter: 45	E15i unlock problem [Solved] whats this problem Unlocking. Please wait... ERROR[018]: Logical block operation failed at 1152 Kb (Hex address 0x00120000). Reason: Connection lost. ERROR[018]: Logical block operation failed at 0 Kb (Hex address 0x00000000). Reason: Connection lost. Last edited by Medusa Box; 01-22-2012 at 14:45.

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
$50 Reward for unlocking my 6150!!!	TheDon	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	03-23-2015 14:21

01-18-2012, 13:41	#2 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	Hello. What software version do You use? What power supply do You use for powering the device? Aslo please post here full software log with all of your actions.

01-19-2012, 20:37	#3 (permalink)
OHIIM Cheater -Don't Deal with him- Join Date: Mar 2006 Location: ACCRA GHANA Age: 39 Posts: 827 Member: 244250 Status: Offline Sonork: 100.160773 Thanks Meter: 196	se this e15 trying to repair device power supply. Medusa JTAG Firmware version 1.0.9. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 203C00E1, IR Length = 4. JTAG speed : Auto (RTCK). VREF level : 2.56 V CPU : Qualcomm MSM7227 Core ID : 203C00E1 ERROR[002]: Failed to load Medusa Device Server to target RAM. ERROR[035]: Target device has been powered off during connect. Medusa JTAG Firmware version 1.0.9. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 203C00E1, IR Length = 4. JTAG speed : Auto (RTCK). VREF level : 2.9 V CPU : Qualcomm MSM7227 Core ID : 203C00E1 ERROR[002]: Failed to load Medusa Device Server to target RAM. ERROR[035]: Target device has been powered off during connect. Medusa JTAG Firmware version 1.0.9. Medusa JTAG Hardware S64 revision B. MI: Medusa JTAG init failed. ERROR[035]: Target device has been powered off during connect. VREF = 0.0V is less than required level. Please check target device power supply. Medusa JTAG Firmware version 1.0.9. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 203C00E1, IR Length = 4. JTAG speed : Auto (RTCK). VREF level : 2.54 V CPU : Qualcomm MSM7227 Core ID : 203C00E1 ERROR[002]: Failed to load Medusa Device Server to target RAM. ERROR[035]: Target device has been powered off during connect. Medusa JTAG Firmware version 1.0.9. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 203C00E1, IR Length = 4. JTAG speed : Auto (RTCK). VREF level : 2.23 V CPU : Qualcomm MSM7227 Core ID : 203C00E1 ERROR[002]: Failed to load Medusa Device Server to target RAM. ERROR[035]: Target device has been powered off during connect. Medusa JTAG Firmware version 1.0.9. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 203C00E1, IR Length = 4. JTAG speed : Auto (RTCK). VREF level : 2.25 V CPU : Qualcomm MSM7227 Core ID : 203C00E1 ERROR[002]: Failed to load Medusa Device Server to target RAM. ERROR[035]: Target device has been powered off during connect. Medusa JTAG Firmware version 1.0.9. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 203C00E1, IR Length = 4. JTAG speed : Auto (RTCK). VREF level : 1.86 V CPU : Qualcomm MSM7227 Core ID : 203C00E1 ERROR[002]: Failed to load Medusa Device Server to target RAM. ERROR[035]: Target device has been powered off during connect. Medusa JTAG Firmware version 1.0.9. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 203C00E1, IR Length = 4. JTAG speed : Auto (RTCK). VREF level : 1.44 V CPU : Qualcomm MSM7227 Core ID : 203C00E1 ERROR[002]: Failed to load Medusa Device Server to target RAM. ERROR[035]: Target device has been powered off during connect. Medusa JTAG Firmware version 1.0.9. Medusa JTAG Hardware S64 revision B. Detected TAP ID: 203C00E1, IR Length = 4. JTAG speed : Auto (RTCK). VREF level : 1.49 V CPU : Qualcomm MSM7227 Core ID : 203C00E1 ERROR[002]: Failed to load Medusa Device Server to target RAM. ERROR[035]: Target device has been powered off during connect.

01-19-2012, 22:48	#4 (permalink)
LokitoFlasheo Freak Poster Join Date: Sep 2009 Location: peru Posts: 165 Member: 1121044 Status: Offline Thanks Meter: 48	please use dual conection battery and cable usb 100% tested

01-20-2012, 08:05	#5 (permalink)
Medusa Box Product Supporter Join Date: Mar 2011 Location: Octopus-team Posts: 9,360 Member: 1538383 Status: Offline Sonork: 100.1587278 Thanks Meter: 3,398	Also please use the latest software version.

01-21-2012, 03:34	#6 (permalink)
raphael.aranha Major Poster Join Date: Nov 2010 Location: brasil rj Posts: 40 Member: 1450803 Status: Offline Thanks Meter: 2	Man I had the same problem , drives were the problem , good lock

01-22-2012, 11:46	#7 (permalink)
OHIIM Cheater -Don't Deal with him- Join Date: Mar 2006 Location: ACCRA GHANA Age: 39 Posts: 827 Member: 244250 Status: Offline Sonork: 100.160773 Thanks Meter: 196	Oaky.... Thanks for help problem solved