I9505 dead EMMC programming

[zezoelec]

the phone is dead
I had this driver : Qualcomm hs-usb QDloader 9008
but the odin cant see it and I cant flash it by odin
I linked EMMC to Medusa Pro and made repair by tar
I used this flash file :I9505_XXUHOJ2_XEGHOJ1 with 4files
and used this pit : JFLTE_EUR_OPEN.pit

the flash operation 100% finish after 15 minutes
but the phone is the same problem
the is no bood , no download mode
with power supply it takes 30 mA

could anyone help me please
thanks in advance

----------
when I make connecting to the box : this is logs
Welcome to Medusa Pro Software version 1.1.8.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 1
Reader #1: FT SCR2000 0

Please disconnect battery and USB cable.


eMMC interface selected.

Connecting...
Device : Toshiba eMMC 016G94
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB
--------------------------------------------------------
CID Info

CID : 110100303136473934B0940B54BF2193
Manufacturer ID : 0X11
Device/BGA : BGA(Discrete embeded)
OEM/Application ID : 0X00
Product name : 016G94
Product revision : 11.0
Product serial number : (hex)940B54BF
Manufacturing date : 02/2014
--------------------------------------------------------
CSD Info

CSD : D00E00320F5903FFFFFFFFFF92400025
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
--------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Boot partition enable : Device not boot enabled (default)

Partition config : 00000000
Backup EXT_CSD saved to file E:/program files/Medusa Pro Software/EXT_CSD Backups/016G94_03_09_2016_21_04_56.bin.
Connect successful.
--------------------------------------------------------




I tried Erase the chip ,
then flashing again but the same problem
I tried j-tag with other box but I couldnt repair it by j-tag