j510mn boot dead [Answered]

[jseyedanas]

aFTER FLASHING ABOOT FILE FROM COMBINATION MY PHONE GOT DEAD...ITS NOT GETTING ON...CAN U PLEASE HELP ME TO RESOLVE THIS ISSUE..I HAVE MEDUSA PRO BOX ....

[Octopus support]

Hello.

Please post here full Software log of flash operation, we will check it.

[jseyedanas]

my j510mn had frp lock to remove it i flashed abootfile from combination to activate adb....
after flash success ..phone not getting on...no download mode too
please help

INFO : 8/7/2020 2:08:15 PM > Platform: SAMSUNG
INFO : 8/7/2020 2:08:15 PM > Selected model: SM-J510MN
WARN : 8/7/2020 2:08:15 PM > Please put the phone into Download Mode and connect USB cable.
WARN : 8/7/2020 2:08:15 PM > To put SM-J510MN into Download Mode, You have to perform the following steps:
WARN : 8/7/2020 2:08:15 PM > 1. Reconnect the battery.
WARN : 8/7/2020 2:08:15 PM > 2. Press and hold "Volume-" + "Home" + "Power ON" keys.
WARN : 8/7/2020 2:08:15 PM > 3. When phone turns on, press "Volume+" key.
INFO : 8/7/2020 2:08:17 PM > Found phone on
WARN : 8/7/2020 2:08:17 PM > Advanced mode!
INFO : 8/7/2020 2:08:22 PM > Firmware write started.
INFO : 8/7/2020 2:08:23 PM > Writing ABOOT section...
INFO : 8/7/2020 2:08:25 PM > ABOOT section has been written successfully.
INFO : 8/7/2020 2:08:25 PM > Firmware writing successfully completed.
INFO : 8/7/2020 2:08:26 PM > Performed by 1.9.3.0 Software version.

[Octopus support]

Hello.

You can try to repair your phone via Repair devices based on Qualcomm CPU's operation on Factory repair section.

[jseyedanas]

j510mn how to connect the emmc chip to jtag box...wats the connection ???
.is it jtag or emmc i have use....this is the first time im trying this,,,please help me ....
do i need any file??