Is MEDUSA BOX ok? Even GOOD phone CANT connect !

[zakiyyboss]

I have a Dead BOOT i8190. Always FLASH UNKNOWN. Even i try to connect a WORKING phone still same PROBLEM i solder cable DIRECTLY. Good TP..

Is there a POSIBILITY that the BOX is damage? What can be BAD?

Log started at 2/28/2015 9:49:58 AM ...
Welcome to Medusa Box Software version 2.4.3

To make Repair Samsung GT-I8190 You need:
1. Connect it via Jtag cable to Box.
2. Connect to PC via USB cable (use both connection).
3. Install U8500 driver (if driver was not installed automatically) from folder "C:\Program Files\GSMServer\Medusa\Driver\U8500\" and try to connect the phone again.

Note: This phone can connect more longer, so You need to wait 30-50 seconds.
Operating Mode: EasyRepair Mode
Selected device model: Samsung GT-I8190
Connecting. Please wait...
Checking data...
Resetting target. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 62286041, IR Length = 6.
MI: Found ST-Ericsson JTAG Router 62286041.
MI: Enabling ARM Cortex A9 core.
MI: Halting target, attempt 1.
JTAG speed : 2400 KHz.
VREF level : 1.79 V
CPU : ST-Ericsson U8500
Core ID : 4BA00477
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0x0000F00F, cycle 1.
MI: Received server capabilities 0x00000011.
MI: Detailed server caps: FLASH, WDOG
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0x00000000.
ERROR[008]: Unknown flash device. Device No:ID = 0:00000000.
ERROR[035]: Target device has been powered off during connect.
Please connect the target device and power it on...
Checking data...
Resetting target. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 62286041, IR Length = 6.
MI: Found ST-Ericsson JTAG Router 62286041.
MI: Enabling ARM Cortex A9 core.
MI: Halting target, attempt 1.
JTAG speed : 2400 KHz.
VREF level : 1.80 V
CPU : ST-Ericsson U8500
Core ID : 4BA00477
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0x0000F00F, cycle 1.
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0x00000000.
ERROR[008]: Unknown flash device. Device No:ID = 0:00000000.
ERROR[035]: Target device has been powered off during connect.
Checking data...
Resetting target. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 62286041, IR Length = 6.
MI: Found ST-Ericsson JTAG Router 62286041.
MI: Enabling ARM Cortex A9 core.
MI: Halting target, attempt 1.
JTAG speed : 2400 KHz.
VREF level : 1.79 V
CPU : ST-Ericsson U8500
Core ID : 4BA00477
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0x0000F00F, cycle 1.
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0x00000000.
ERROR[008]: Unknown flash device. Device No:ID = 0:00000000.
ERROR[035]: Target device has been powered off during connect.
Operating Mode: EasyRepair Mode
Selected device model: Samsung GT-I8190
Connecting. Please wait...
Checking data...
Resetting target. Please wait...
ERROR[034]: RTCK signal does not respond. Defaulting to 1 MHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 62286041, IR Length = 6.
MI: Found ST-Ericsson JTAG Router 62286041.
MI: Enabling ARM Cortex A9 core.
MI: Halting target, attempt 1.
JTAG speed : 1000 KHz.
VREF level : 1.80 V
CPU : ST-Ericsson U8500
Core ID : 4BA00477
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0x0000F00F, cycle 1.
MI: Received server capabilities 0x00000011.
MI: Detailed server caps: FLASH, WDOG
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0x00000000.
ERROR[008]: Unknown flash device. Device No:ID = 0:00000000.
ERROR[035]: Target device has been powered off during connect.
Please connect the target device and power it on...
Checking data...
Resetting target. Please wait...
ERROR[034]: RTCK signal does not respond. Defaulting to 1 MHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 62286041, IR Length = 6.
MI: Found ST-Ericsson JTAG Router 62286041.
MI: Enabling ARM Cortex A9 core.
MI: Halting target, attempt 1.
JTAG speed : 1000 KHz.
VREF level : 1.80 V
CPU : ST-Ericsson U8500
Core ID : 4BA00477
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0x0000F00F, cycle 1.
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0x00000000.
ERROR[008]: Unknown flash device. Device No:ID = 0:00000000.
ERROR[035]: Target device has been powered off during connect.
Checking data...
Resetting target. Please wait...
ERROR[034]: RTCK signal does not respond. Defaulting to 1 MHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 62286041, IR Length = 6.
MI: Found ST-Ericsson JTAG Router 62286041.
MI: Enabling ARM Cortex A9 core.
MI: Halting target, attempt 1.
JTAG speed : 1000 KHz.
VREF level : 1.80 V
CPU : ST-Ericsson U8500
Core ID : 4BA00477
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0x0000F00F, cycle 1.
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0x00000000.
ERROR[008]: Unknown flash device. Device No:ID = 0:00000000.
ERROR[035]: Target device has been powered off during connect.
Operating Mode: EasyRepair Mode
Selected device model: Samsung GT-I8190
Connecting. Please wait...
Checking data...
Resetting target. Please wait...
ERROR[034]: RTCK signal does not respond. Defaulting to 1 MHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 62286041, IR Length = 6.
MI: Found ST-Ericsson JTAG Router 62286041.
MI: Enabling ARM Cortex A9 core.
MI: Halting target, attempt 1.
JTAG speed : 1000 KHz.
VREF level : 1.79 V
CPU : ST-Ericsson U8500
Core ID : 4BA00477
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0x0000F00F, cycle 1.
MI: Received server capabilities 0x00000011.
MI: Detailed server caps: FLASH, WDOG
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0x00000000.
ERROR[008]: Unknown flash device. Device No:ID = 0:00000000.
ERROR[035]: Target device has been powered off during connect.
Please connect the target device and power it on...
Checking data...
Resetting target. Please wait...
ERROR[034]: RTCK signal does not respond. Defaulting to 1 MHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 62286041, IR Length = 6.
MI: Found ST-Ericsson JTAG Router 62286041.
MI: Enabling ARM Cortex A9 core.
MI: Halting target, attempt 1.
JTAG speed : 1000 KHz.
VREF level : 1.79 V
CPU : ST-Ericsson U8500
Core ID : 4BA00477
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0x0000F00F, cycle 1.
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0x00000000.
ERROR[008]: Unknown flash device. Device No:ID = 0:00000000.
ERROR[035]: Target device has been powered off during connect.
Checking data...
Resetting target. Please wait...
ERROR[034]: RTCK signal does not respond. Defaulting to 1 MHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 62286041, IR Length = 6.
MI: Found ST-Ericsson JTAG Router 62286041.
MI: Enabling ARM Cortex A9 core.
MI: Halting target, attempt 1.
JTAG speed : 1000 KHz.
VREF level : 1.79 V
CPU : ST-Ericsson U8500
Core ID : 4BA00477
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0x0000F00F, cycle 1.
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0x00000000.
ERROR[008]: Unknown flash device. Device No:ID = 0:00000000.
ERROR[035]: Target device has been powered off during connect.
Operating Mode: EasyRepair Mode
Selected device model: Samsung GT-I8190
Connecting. Please wait...
Checking data...
Resetting target. Please wait...
ERROR[034]: RTCK signal does not respond. Defaulting to 1 MHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 62286041, IR Length = 6.
MI: Found ST-Ericsson JTAG Router 62286041.
MI: Enabling ARM Cortex A9 core.
MI: Halting target, attempt 1.
JTAG speed : 1000 KHz.
VREF level : 1.80 V
CPU : ST-Ericsson U8500
Core ID : 4BA00477
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0x0000F00F, cycle 1.
MI: Received server capabilities 0x00000011.
MI: Detailed server caps: FLASH, WDOG
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0x00000000.
ERROR[008]: Unknown flash device. Device No:ID = 0:00000000.
ERROR[035]: Target device has been powered off during connect.
Please connect the target device and power it on...
Checking data...
Resetting target. Please wait...
ERROR[034]: RTCK signal does not respond. Defaulting to 1 MHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 62286041, IR Length = 6.
MI: Found ST-Ericsson JTAG Router 62286041.
MI: Enabling ARM Cortex A9 core.
MI: Halting target, attempt 1.
JTAG speed : 1000 KHz.
VREF level : 1.79 V
CPU : ST-Ericsson U8500
Core ID : 4BA00477
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0x0000F00F, cycle 1.
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0x00000000.
ERROR[008]: Unknown flash device. Device No:ID = 0:00000000.
ERROR[035]: Target device has been powered off during connect.
Operating Mode: Advanced Mode
Selected device model: Samsung GT-I8190
Connecting. Please wait...
Checking data...
Resetting target. Please wait...
ERROR[034]: RTCK signal does not respond. Defaulting to 1 MHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 62286041, IR Length = 6.
MI: Found ST-Ericsson JTAG Router 62286041.
MI: Enabling ARM Cortex A9 core.
MI: Halting target, attempt 1.
JTAG speed : 1000 KHz.
VREF level : 1.80 V
CPU : ST-Ericsson U8500
Core ID : 4BA00477
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0xFFFFFFFF, cycle 0.
MI: Received status 0x0000F00F, cycle 1.
MI: Received server capabilities 0x00000011.
MI: Detailed server caps: FLASH, WDOG
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0x00000000.
ERROR[008]: Unknown flash device. Device No:ID = 0:00000000.