redmi mi 4 c need srf file

[ridabadredine]

hi to all
need redmi mi 4 c (libra) srf file thankx

[andrei_d1978]

Originally Posted by ridabadredine

hi to all
need redmi mi 4 c (libra) srf file thankx

In the Factory Repair tab, you can write the factory firmware through Qualcom processor based recovery devices using XML files. Repairing devices based on Qualcom processors using XML files will be active when the device is connected to the programmer via 9008 or a USB flash drive in a socket.

[ridabadredine]

thanks bro ihave flash it with xml file as you sayed many times but phone always in hs -usb qdloader

[ridabadredine]

here is full log
Model Settings:
Interface : USB
Core : Auto Detect
Loader : Auto Detect

Connecting...
Finished calculating
Searching loader...
Loader found:
Core : Qualcomm MSM8992
Loader : QLoader_MSM8992_V6_Xiaomi
Sending loader...OK.
Loader successfully initialized.

Device : CoreID_009690E1
Core : Auto Detect
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 2.1.4; FW: 1.24.
P00: GPT (00000000, 00000022) 17 KB
P01: sbl1 (00000022, 00001000) 2048 KB
P02: sbl1bak (00001022, 00001000) 2048 KB
P03: rpm (00002022, 00000800) 1024 KB
P04: rpmbak (00002822, 00000800) 1024 KB
P05: tz (00003022, 00000800) 1024 KB
P06: tzbak (00003822, 00000800) 1024 KB
P07: ssd (00004022, 00000010) 8 KB
P08: hyp (00004032, 00000800) 1024 KB
P09: hypbak (00004832, 00000800) 1024 KB
P10: DDR (00005032, 00000800) 1024 KB
P11: aboot (00005832, 00002000) 4 MB
P12: abootbak (00007832, 00002000) 4 MB
P13: misc (00009832, 00002000) 4 MB
P14: bluetooth (0000B832, 00000800) 1024 KB
P15: pmic (0000C032, 00000100) 128 KB
P16: pmicbak (0000C132, 00000100) 128 KB
P17: limits (0000C232, 00000002) 1024 b
P18: apdp (0000C234, 00000200) 256 KB
P19: msadp (0000C434, 00000200) 256 KB
P20: dpo (0000C634, 00000002) 1024 b
P21: sdi (0000C636, 000000C0) 96 KB
P22: keystore (0000C6F6, 00000400) 512 KB
P23: devinfo (0000CAF6, 00000002) 1024 b
P24: config (0000CAF8, 00000400) 512 KB
P25: sec (0000CEF8, 00000800) 1024 KB
P26: logo (0000D6F8, 00008000) 16 MB
P27: bk1 (000156F8, 0000A908) 21.13 MB
P28: modemst1 (00020000, 00000C00) 1536 KB
P29: modemst2 (00020C00, 00000C00) 1536 KB
P30: fsc (00021800, 00000002) 1024 b
P31: bk2 (00021802, 0000E7FE) 29 MB
P32: bk3 (00030000, 00010000) 32 MB
P33: fsg (00040000, 00000C00) 1536 KB
P34: bk4 (00040C00, 0000F400) 30.5 MB
P35: bk5 (00050000, 00010000) 32 MB
P36: modem (00060000, 00040000) 128 MB
P37: boot (000A0000, 00020000) 64 MB
P38: recovery (000C0000, 00020000) 64 MB
P39: persist (000E0000, 00010000) 32 MB
P40: oops (000F0000, 00010000) 32 MB
P41: system (00100000, 003C0000) 1920 MB
P42: cache (004C0000, 000C0000) 384 MB
P43: cust (00580000, 000A0000) 320 MB
P44: userdata (00620000, 016FEFDF) 11.5 GB
Backuping modemst1 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/_modemst1_0x20000_0xc00_27_12_2020_16_36_18.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.1.4; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/_modemst2_0x20c00_0xc00_27_12_2020_16_36_18.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.1.4; FW: 1.24.
Backuping fsg partition...
Opening C:/Program Files/Medusa Pro Software/Backups/_fsg_0x40000_0xc00_27_12_2020_16_36_18.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.1.4; FW: 1.24.

[andrei_d1978]

Originally Posted by ridabadredine

thanks bro ihave flash it with xml file as you sayed many times but phone always in hs -usb qdloader

and if you flash the official mi flasher? And then draw conclusions