Samsung B2710 - Repair problem - GSM-Forum

GsmLiberty · 11-24-2014, 23:55

Phone 100% software problem - flash low bat

Write fullflash and boot only -same problem, phone freeze in logo B2710 proces bar no go

Code:

Selected device model: Samsung GT-B2710
Connecting. Please wait...
Checking data...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision D.
Detected TAP ID: 4015F0E1, IR Length = 4.
JTAG speed  : Auto (RTCK).
VREF level  : 1.11 V
CPU         : Qualcomm QSC6270
Core ID     : 4015F0E1
Flash device: Samsung OneNAND KFH2G16Q2M
Flash ID    : 00EC0040
 Page size  : 2048 bytes
 Block size : 64 pages (128 Kb)
 Block count: 2048
 Flash size : 256 Mb
Write protection disabled.
Connect successful.
Erasing BOOT section. Please wait... Done
Erasing FIRMWARE section. Please wait... Done
ECC Mode enabled.
Opening "C:\Program Files\GsmServer\Medusa\Firmware\SAMSUNG_GTB2710_FullFlash.bin" file...
Writing BOOT section. Please wait... Done
Writing FIRMWARE section. Please wait... Done

Octopus box · 11-25-2014, 13:01

Try to find original firmware and flasher and re-flash the phone.

WBGSM · 11-25-2014, 14:54

Brother this is Hardware Problem 1st Remove Charging IC if not done then 100% CPU will Damage

br
WBGSM

GsmLiberty · 11-25-2014, 14:58

Code:

B2710XEJI2

Code:

Download Start Ch[0]
osbl 510.9KB OK[0.7s]
fsbl 179.8KB OK[0.3s]
Dbl 28.9KB OK[0.2s]
Wait reset !!
Amss 46268.4KB OK[84.6s]
Rsrc1 24903.7KB OK[34.4s]
Rsrc2 546.4KB OK[1.6s]
FFS 35444.7KB OK[52.6s]
CSC 10477.6KB OK[26.7s]
SHPAPP 10010.6KB OK[11.7s]
All files complete[258.6s]

Phone start normal (movie Samsung) show logo and freeze

Octopus box · 11-25-2014, 15:07

Try to write other firmwares, if You have. If the problem is still the same - most likely, this is HW issue.

2000gsmas · 12-30-2014, 15:57

I have same problem, I just want to write language and now phone freeze

Octopus box · 12-30-2014, 16:02

Try to write different firmwares by using any Samsung Software, that supports this device.

distefano · 09-15-2015, 15:42

where is Charging IC ?
any pic ?
my phone still sgows conected to usb

09-15-2015, 15:42	#8 (permalink)
distefano Freak Poster Join Date: May 2003 Location: POLAND Age: 48 Posts: 476 Member: 29669 Status: Offline Thanks Meter: 1	still problem where is Charging IC ? any pic ? my phone still sgows conected to usb

11-25-2014, 13:01	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,850 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Try to find original firmware and flasher and re-flash the phone.

11-25-2014, 14:54	#3 (permalink)
WBGSM No Life Poster Join Date: May 2012 Location: In Your Heart Age: 37 Posts: 776 Member: 1759636 Status: Offline Sonork: 100.1591515 Thanks Meter: 785	Brother this is Hardware Problem 1st Remove Charging IC if not done then 100% CPU will Damage br WBGSM

11-25-2014, 15:07	#5 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,850 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Try to write other firmwares, if You have. If the problem is still the same - most likely, this is HW issue.

12-30-2014, 15:57	#6 (permalink)
2000gsmas Junior Member Join Date: Mar 2014 Posts: 33 Member: 2142840 Status: Offline Thanks Meter: 5	I have same problem, I just want to write language and now phone freeze

12-30-2014, 16:02	#7 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,850 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Try to write different firmwares by using any Samsung Software, that supports this device.