SAMSUNG EMMC KMDH6001DA-B422 Firmware read done from Good emmc - GSM-Forum

suriyas1 · 02-03-2021, 11:51

Log:

Quote:

Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : 50 MHz

Pin connector is detected!(eMMC: 1b, UFS: PWM 1-4)

Connecting...
Device : Samsung eMMC DH6DAB
Page size : 512 B
Block size : 512 B
Block count : 122142720
Size : 58.24 GB (59640.00 MB)
---------------------------------------------------------------
CID Info

CID : 150100444836444142027904C4B1C541
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : DH6DAB
Product revision : 0.2
Product serial number : (hex) 7904C4B1
Manufacturing date : 12/2018
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes

Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x01) RST_n signal is permanently enabled

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 30531584 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/DH6DAB_03_02_2021_16_10_51.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.9; FW: 2.00.

---------------------------------------------------------------
Searching Android build info...
Not found
---------------------------------------------------------------
RPMB: Authentication Key not yet programmed.
Smart report not valid!
DEVICE_LIFE_TIME_EST_TYP_B : 0% - 10% device life time used
DEVICE_LIFE_TIME_EST_TYP_A : 0% - 10% device life time used
PRE_EOL_INFO : Normal
SW: 2.1.9; FW: 2.00.

Writing eMMC firmware from file: C:/Users/suriy/Desktop/emmc fw sec/DH6DAB samsung bga 254_VCT0_00000000000000000000000000000000_8_0_R1_1 6_10_47.bin...Done.
Finalizing...Done.
Write CID succesfully completed.
Disconnected.
EMMC writing firmware Done.
SW: 2.1.9; FW: 2.00.

Selected PIN - CONNECTOR.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : 50 MHz

Pin connector is detected!(eMMC: 1b, UFS: PWM 1-4)

Connecting...
Device : Samsung eMMC DH6DAB
Page size : 512 B
Block size : 512 B
Block count : 122142720
Size : 58.24 GB (59640.00 MB)
---------------------------------------------------------------
CID Info

CID : 150100444836444142027904C4B1C541
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : DH6DAB
Product revision : 0.2
Product serial number : (hex) 7904C4B1
Manufacturing date : 12/2018
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes

Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 30531584 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/DH6DAB_03_02_2021_16_12_10.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.9; FW: 2.00.

---------------------------------------------------------------
Searching Android build info...
Not found
---------------------------------------------------------------
RPMB: Authentication Key not yet programmed.

Smart report info:

Hash code:
292787238CD56FC7214B05A466D057B89D0C29D6F2B654535D 35FBD2CD890CA1

Error mode : Normal
Super block size : 0x02000000 Bytes
Super page size : 0x00008000 Bytes
Optimal write size : 0x00010000 Bytes
Number of banks : 2
Bank0 init bad block : 4
Bank0 runtime bad block : 0
Bank0 remain reserved block : 63
Bank1 init bad block : 5
Bank1 runtime bad block : 0
Bank1 remain reserved block : 62
Bank2 init bad block : 0
Bank2 runtime bad block : 0
Bank2 remain reserved block : 0
Bank3 init bad block : 0
Bank3 runtime bad block : 0
Bank3 remain reserved block : 0
Max erase count : 2
Min erase count : 0
Avg erase count : 0
Read reclaim count : 0
Optimal trim size : 0x00001000 Bytes
Max erase count (SLC) : 2
Min erase count (SLC) : 1
Avg erase count (SLC) : 1
Max erase count (MLC) : 0
Min erase count (MLC) : 0
Avg erase count (MLC) : 0

FW version: 564354301306162002004B0017110110

DEVICE_LIFE_TIME_EST_TYP_B : 0% - 10% device life time used
DEVICE_LIFE_TIME_EST_TYP_A : 0% - 10% device life time used
PRE_EOL_INFO : Normal
SW: 2.1.9; FW: 2.00.

LINK : Download

iliynalex · 02-11-2021, 17:02

Good afternoon, everyone, the second flash after the internal firmware becomes unusable, what to do with them or how to restore it. I'm already in a panic ..

suriyas1 · 02-11-2021, 18:17

Quote:

Originally Posted by iliynalex

Good afternoon, everyone, the second flash after the internal firmware becomes unusable, what to do with them or how to restore it. I'm already in a panic ..

Why ur write emmc firmware(what is the problem of emmc),

1.Check the health report(smart report)
2.One factory format that card and try to write firmware.
This is tested file