Another I9003 Boot Dead Fix by ORT-JTAG - GSM-Forum

.:UnitedGSM:. · 11-02-2011, 07:07

Another I9003 Boot Dead Fix by ORT-JTAG

Things you'll need

A USB SD card reader. Built-in card readers in laptops are not known to always work, if you follow these instructions and get an error, try using a USB card reader
win32diskimager from gsmhosting { posted by supporter }
A 128mb or larger SD card

Repair Procedures you should follow clearly and carefully !

Make JTAG Connections
Download Latest Version Release
Extract to a folder
Download Repair File
Place it in "Phones" folder
Start ORT Plus
Click SCAN
Go to " One Button Repair " Tab
Select Model and Click Repair

regards,

yolem053 · 11-02-2011, 07:45

galing mo uncle nonoy espina

proser32 · 11-03-2011, 02:18

Hi, I need your help with something, I would like to know if you can help me know what kind of home are using jtag, eh also seen the pinout of the scl i9003 motherboard but the problem is I do not understand what are the wires corresponding to solder on each pin .. the homemade jtag and seen in many places have the same structure designed with the male inlet port of a printer. could guide me please? I'm desperate ...

I'm honestly willing to risk whatever, just not clear to me the end of the jtag, this q is male inlet printer port .. is connected in some way??? or simply a bridge to the solder that has for the motherboard???
anyway you have read this agradesco, sorry if this is bad writing is that I'm from Spain and I'm using the google translator .. thank you very much in advance .. by the way my mail is [email protected]

.:UnitedGSM:. · 11-04-2011, 04:31

Quote:

Hi, I need your help with something, I would like to know if you can help me know what kind of home are using jtag, eh also seen the pinout of the scl i9003 motherboard but the problem is I do not understand what are the wires corresponding to solder on each pin .. the homemade jtag and seen in many places have the same structure designed with the male inlet port of a printer. could guide me please? I'm desperate ...

I'm honestly willing to risk whatever, just not clear to me the end of the jtag, this q is male inlet printer port .. is connected in some way??? or simply a bridge to the solder that has for the motherboard???
anyway you have read this agradesco, sorry if this is bad writing is that I'm from Spain and I'm using the google translator .. thank you very much in advance .. by the way my mail is [email protected]

start on cable 1 black..
now here's the color cable on pcb pinout.

GRND = number 16 yellow green
RST = number 15 blue
TCK = number 9 red
TRST = number 2 dirty white
TMS = number 7 yellow

TDO = number 13 dirty white
TDI = number 5 blue
RTCK = number 11 black
VREF = number 1 black

wbr,

Husk · 02-09-2012, 20:57

Please help me Eric
I'm already desperate. I have checked the connections and the ORT did not recognize the CPU.
Could it be that the phone is dead?
I need a little light, and not to do.
Thank you very much for your attention.

Husk · 02-09-2012, 21:52

Solved problem ¡¡
My mistake has been to work with the board disconnected the phone.
Apologize for the inconvenience. Anyone who need to connect the jig is pictured with the connections OK.
regards

fairyland · 02-13-2012, 20:43

hello sir
i was flashing i9000 sgs and the flashing stopped in the middle and phone was totally bricked..
i bought ort but i have problems...please help me that
got a coloured cable with no idea which coloured cable to sold with pin outs and please tell me what should i use to power the pcb...please help

.:UnitedGSM:. · 02-14-2012, 03:48

post pinout image of ur i9000 here..
download @support

Quote:

Originally Posted by fairyland

hello sir
i was flashing i9000 sgs and the flashing stopped in the middle and phone was totally bricked..
i bought ort but i have problems...please help me that
got a coloured cable with no idea which coloured cable to sold with pin outs and please tell me what should i use to power the pcb...please help

fairyland · 02-14-2012, 12:38

here is the pin outs

basqui · 07-07-2013, 08:09

what's the trick to connect? on my unit always scan cpu failed ..

unit killed by interrupted flashing of firmware,...

jatchaminda · 07-07-2013, 09:49

Quote:

Originally Posted by basqui

what's the trick to connect? on my unit always scan cpu failed ..

unit killed by interrupted flashing of firmware,...

check your connection 1st
if your phone is on sleepmode you need to make bootcard

more info here

http://forum.gsmhosting.com/vbb/f665...dated-1255352/

11-02-2011, 07:07	#1 (permalink)
.:UnitedGSM:. No Life Poster Join Date: May 2007 Location: Philippines Posts: 1,331 Member: 502531 Status: Offline Thanks Meter: 897	Another I9003 Boot Dead Fix by ORT-JTAG Another I9003 Boot Dead Fix by ORT-JTAG Things you'll need A USB SD card reader. Built-in card readers in laptops are not known to always work, if you follow these instructions and get an error, try using a USB card reader win32diskimager from gsmhosting { posted by supporter } A 128mb or larger SD card Repair Procedures you should follow clearly and carefully ! Make JTAG Connections Download Latest Version Release Extract to a folder Download Repair File Place it in "Phones" folder Start ORT Plus Click SCAN Go to " One Button Repair " Tab Select Model and Click Repair regards,

02-13-2012, 20:43	#7 (permalink)
fairyland Insane Poster Join Date: Apr 2008 Location: london Posts: 91 Member: 745365 Status: Offline Thanks Meter: 13	ort power supply to pcb hello sir i was flashing i9000 sgs and the flashing stopped in the middle and phone was totally bricked.. i bought ort but i have problems...please help me that got a coloured cable with no idea which coloured cable to sold with pin outs and please tell me what should i use to power the pcb...please help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need software for 5161 by cable	mln2000	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	08-29-2010 20:17
nokia nse-spv8 by zulea	rothmanns	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-12-2000 07:52
Another opinion	Nitas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	03-14-2000 20:34
have nokia lock 2 solution by cable	oskarcore	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	11-29-1999 22:49
Copy from one 6110 to another	Leif Nielsen	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-10-1999 22:36

11-02-2011, 07:45	#2 (permalink)
yolem053 Freak Poster Join Date: Jan 2006 Location: Maniki Kapalong Norht Davao Posts: 336 Member: 227348 Status: Offline Sonork: yolem053 Thanks Meter: 44	galing mo uncle nonoy espina

11-03-2011, 02:18	#3 (permalink)
proser32 Junior Member Join Date: Sep 2011 Posts: 4 Member: 1658102 Status: Offline Thanks Meter: 0	Hi, I need your help with something, I would like to know if you can help me know what kind of home are using jtag, eh also seen the pinout of the scl i9003 motherboard but the problem is I do not understand what are the wires corresponding to solder on each pin .. the homemade jtag and seen in many places have the same structure designed with the male inlet port of a printer. could guide me please? I'm desperate ... I'm honestly willing to risk whatever, just not clear to me the end of the jtag, this q is male inlet printer port .. is connected in some way??? or simply a bridge to the solder that has for the motherboard??? anyway you have read this agradesco, sorry if this is bad writing is that I'm from Spain and I'm using the google translator .. thank you very much in advance .. by the way my mail is [email protected]

02-09-2012, 20:57	#5 (permalink)
Husk Junior Member Join Date: Jan 2012 Posts: 3 Member: 1713573 Status: Offline Thanks Meter: 0	Please help me Eric I'm already desperate. I have checked the connections and the ORT did not recognize the CPU. Could it be that the phone is dead? I need a little light, and not to do. Thank you very much for your attention.

02-09-2012, 21:52	#6 (permalink)
Husk Junior Member Join Date: Jan 2012 Posts: 3 Member: 1713573 Status: Offline Thanks Meter: 0	Solved problem ¡¡ My mistake has been to work with the board disconnected the phone. Apologize for the inconvenience. Anyone who need to connect the jig is pictured with the connections OK. regards

07-07-2013, 08:09	#10 (permalink)
basqui Insane Poster Join Date: Sep 2009 Posts: 88 Member: 1123898 Status: Offline Thanks Meter: 15	what's the trick to connect? on my unit always scan cpu failed .. unit killed by interrupted flashing of firmware,...