Easy Jtag Not Detected Samsung emmc - GSM-Forum

sammar_707 · 06-14-2023, 17:13

Respected Member Help Please

My Jtag Not detect Samsung emmc

Show this error

Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 14 MHz
EMMC Device Information :
EMMC CID: 150100303030303030562014031443C7
EMMC CSD: 902701320F5903FFF6DB7FE08A40403B
EMMC Manufacture : SAMSUNG , EMMC NAME: 000000 , HEX: 303030303030 , S/N: 20140314 , rev. 0x56
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 4/2016
EMMC ROM 1 (Main User Data) Capacity: 2095982 MB (01FFB6E00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 512 KB (000000080000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000) Counter: 0 , Response: Maybe not clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
EMMC Init completed.

Warning: Maybe your emmc damaged

eMMC are unusable.

but Other Box Detected Proper Show Every thing ok

layder · 06-21-2023, 22:31

rev. 0x56 - this eMMC at boot mode
you can use repeir firmware option

06-14-2023, 17:13	#1 (permalink)
sammar_707 Freak Poster Join Date: Jan 2009 Location: india Posts: 129 Member: 945450 Status: Offline Sonork: 100.1640304 Thanks Meter: 35	Easy Jtag Not Detected Samsung emmc Respected Member Help Please My Jtag Not detect Samsung emmc Show this error Setting interface to EasyJtag2/E-Socket Setting bus width to 8 Bit Setting frequence to 14 MHz EMMC Device Information : EMMC CID: 150100303030303030562014031443C7 EMMC CSD: 902701320F5903FFF6DB7FE08A40403B EMMC Manufacture : SAMSUNG , EMMC NAME: 000000 , HEX: 303030303030 , S/N: 20140314 , rev. 0x56 EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 4/2016 EMMC ROM 1 (Main User Data) Capacity: 2095982 MB (01FFB6E00000) EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 512 KB (000000080000) EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000) Counter: 0 , Response: Maybe not clean EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No Extended CSD Information : Extended CSD rev: 1.5 (MMC 4.41) Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot Boot Bus Config: 0x00 , width 1bit H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled Supported partition features [PARTITIONING_SUPPORT]: 0x03 Device supports partitioning features Device can have enhanced technological features in partitions and user data area Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00 EMMC Init completed. Warning: Maybe your emmc damaged eMMC are unusable. but Other Box Detected Proper Show Every thing ok

06-21-2023, 22:31	#2 (permalink)
layder Product Supporter Join Date: Jun 2002 Location: Belarus Age: 47 Posts: 3,188 Member: 13148 Status: Offline Thanks Meter: 2,948	rev. 0x56 - this eMMC at boot mode you can use repeir firmware option