Easy-JTAG Plus Released!!!! The fastest and innovative box in the gsm world.

[blang]

Easy-JTAG Plus Released!!!! the fastest and innovative box in the gsm world.

Dear Friends!

Thank you for showing the interest in the Easy-JTAG Plus during the last months before the release.

Easy-JTAG is the most wanted and powerful box in the gsm world, but the evolution of technology and memory chips forced us to start developing the easy-jtag plus.

Today we are proud to present you a so long awaited Upgraded version of Easy-JTAG - the fastest and innovative, all in one solution for phone repair, data recovery, digital forensics and much more technologies Easy JTAG Plus Box (Device Programmer). The developing of Easy-JTAG 2 has taken 3 years of researching and 1 year of testing.

Current Easy JTAG Box hardware due to its limitations was reworked from scratch to gain more power and flexibility. The result is the amazing high speed flashing interface. Its performance is the highest of all similar solutions at the market at the moment.

Upgraded version features ultra fast data transfer, has possibility of increasing functionality in the future: hardware of the new box is ready to support new protocols like UFS* and NAND*.



The main features of a new hardware are:

- Updated Host MCU SAM3X8E vs LPC1768 in old box.
- Updated HIGH SPEED FPGA SPARTAN6 vs SPARTAN3 in old box
- Updated POWER MANAGEMENT subsystem – Full Digital PWM with ADC control.
- Added microUSB Connector if additional power required.
- Added VCC and VCCQ switch with overcurrent protection.
- Updated USB device interface: USB 2.0 480 Mbps (High Speed)
- Integrated ISP engine: Z3X High Power Pro Engine (4MB/s )
- ISP Support 1 and 4 bit* connection now.
- Added eMMC 8 bit high speed interface up to 42Mhz
- Integrated NAND* engine: NFC with 4 Kbyte RAM buffer and ECC
- Integrated M-PHY* interface.
- Integrated SPI engine: up to 21 MHz clock for popular SPI Memory Flash IC
- Integrated Self Test Core that exclude 90% faults in production.
- Integrated CCID Card Reader for Z3X Software Use


The main benefits of a new hardware are:

- Box to Host PC speed increased up to 40MB/sec
- JTAG Interface speed increased 20%
- eMMC 1 Bit ISP Speed increased up to 4MB/sec
- eMMC 4 Bit ISP Speed increased up to 12MB/sec (eMMC 5.0+) **
- eMMC 4 Bit Speed up to 18MB/sec
- eMMC 8 Bit Speed up to 28MB/sec ( eMMC 5.0+ )
- Compatibility with 99 host PC systems and OS’s
- Compatibility with old Easy JTAG gen. 1 ISP adapters (1bit)
- Adapter-less ISP (all stuff inside the box)
- Compatibility with all market popular eMMC sockets (with supplied adapters)
- True Plug and Play for modern Windows OS (8, 8.1, 10)
- Full Support for legacy OS like Windows XP



The second great news for today is that you can see inside Easy JTAG Plus Box package *** ;-)
Combining the top quality materials with the best engineering and elegantly designed hardware for the powerful Z3X eMMC Socket.
Now every full box set will be equipped with this amazing a must have thing!



Our eMMC socket is:

- Made from the high quality materials
- Have 10000 cycle of lifetime performance in your service center
- Wide range of eMMC IC supported by: BGA153/169, BGA162/186, BGA221, BGA529
- High-speed up to 40 MB per second over 8 bit bus.
- EMI Resistant Design, Low Noise Components.
- Integrated power logic! No need of the additional power!
- Surge Protection - smart fuse driven (0.5A threshold).
- Easy to operate, just turn and click.
- Like any other Z3X crafted thing - the best solution at the market ;-)




New Easy-JTAG PLUS Box Sets Description:

------------------------------------------------

Full Box Set :
- Z3X EMMC Socket (BGA153/169, BGA162/186, BGA221, BGA529)
- Easy-JTAG Plus Box Hardware
- Z3X Smart Card with EasyJTAG PLUS ACTIVATION
- USB A-B cable
- Adapters set 5 pcs (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)

Lite Box Set :
- Easy-JTAG Plus Box Hardware
- Z3X Smart Card with EasyJTAG PLUS ACTIVATION
- USB A-B cable
- Adapters set 5 pcs (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)



Update pack Easy-JTAG box user to Easy-JTAG PLUS Box.
Sets Description:

Full Upgrade Box Set :
- Z3X EMMC Socket (BGA153/169, BGA162/186, BGA221, BGA529)
- Update activation Easy-Jtag to Easy-Jtag plus
- Easy-JTAG Plus Box Hardware
- USB A-B cable
- Adapters set 5 pcs (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
- Smard Card is not included. Need to use the card from an old box )

Lite Upgrade Box Set :
- Easy-JTAG Plus Box Hardware
- Update activation Easy-Jtag to Easy-Jtag plus
- USB A-B cable
- Adapters set 5 pcs (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
- Smard Card is not included. Need to use the card from an old box )

Full Upgrade Box Set, Special offer :
- Z3X EMMC Socket (BGA153/169, BGA162/186, BGA221, BGA529)
- Automatic update activation Easy-Jtag to Easy-Jtag plus (box activated before 07.07.2017)
- Easy-JTAG Plus Box Hardware
- USB A-B cable
- Adapters set 5 pcs (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
- Smard Card is not included. Need to use the card from an old box )

Lite Upgrade Box Set, Special offer:
- Easy-JTAG Plus Box Hardware
- Automatic update activation Easy-Jtag to Easy-Jtag plus (box activated before 07.07.2017)
- USB A-B cable
- Adapters set 5 pcs (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
- Smard Card is not included. Need to use the card from an old box )
------------------------------------------------



Box Offers and Prices (actual till the end of 2017):

- Full box set - 229$
- Lite box set - 179$
- Upgrade Full set for (box activated before 07.07.2017) - 159$
- Upgrade Lite set for (box activated after 07.07.2017) - 109$

For those who are already enjoyed our product and wanted to increase its possibilities, we have prepared an unbeaten offer - Easy JTAG Box Upgrade kit at a reasonable price. Regular Easy JTAG v1 hardware owners can still use all the new features, except those requiring the new box functionality. Plus, the hardware owners will be able to use both PLUS and "old" software versions. Easy JTAG Box users can buy the special upgrade pack for update box with less price.

Special offer for new users:

- Upgrade Full set for (less than 6 month old boxes) - 109$
- Upgrade lite set for (less than 6 month old boxes) - 49$

Special offer rules:

- Offer is valid for the boxes, activated from 07.07.2017 till now.
- Offer is not transferable or refundable.
- One card - One box.
- Only hardware from the official resellers ;-)

All this prices are recommended for resellers and can be different depends on the reseller location. Shipping price is not included.

From tomorrow boxes will start depart to official resellers.
So from tomorrow you can preorder/oder boxes.


------------------------------------------------------------------------------------------------
The list of resellers is here: EasyJTAG Plus | Buy, price, specifications or Z3X Page| z3x-team
Forum Easy-Jtag - GSM-Forum
Facebook Easy-JTAG https://www.facebook.com/easyjtag/
Facebook Z3X-Team https://www.facebook.com/Z3XTeamPublic/
------------------------------------------------------------------------------------------------


*remark : UFS and NAND protocols due to high speed connection rates requires special sockets and will be released in the future software and firmware releases.
** 4-BIT ISP technology is currently under testing and will be added in the future firmwares.
*** Socket included in Full sets only.
**** Upgrade procedure requires entering serial of upgraded card in a special database by the reseller.
***** Due to the onrush of technology and efforts to meet every customer's demands, the supplier retains the right to change some positions in the list of cables and accessories coming together with the product. Therefore, the package content presented above is rather tentative. More details on the matter can be obtained from our authorised resellers.

[elpring]

we wiate it from long time we trust by easy coder .team
thanks team

[elpring]

i have easy from 2 years i want new hardware witout smart card i will use my old card
i want to know old smart card working in new hardware or must activate

[nagcharan]

Bro onthor prodect was born z3x .... Supar nice awsome....

[arturoh]

to see if I understand, my easy-jtag is obsolete for the new functions, something like what octopus did with jellyfish and you have to buy the new one because of the hardware changes included ... it's not worth anything as adapter, cable and accessory have sold and manufactured so far .... thanks owner of ort-plus almost without access to support, jellyfish practically forgotten, riff asking for money and more money without anything relevant to contribute and now waiting for this SURPRISE

[Gokuu2007]

old hardware funcionaly with new updates? or need new hardware?

[blang]

Originally Posted by Gokuu2007

old hardware funcionaly with new updates? or need new hardware?

yes. but speed will like before.
if you want high speed and other new function then you need new box.
old box will work with new software but function which impossible to release on new hardware will disabled.

[..::SH@RIF®™::..]

I Bought it ten days ago easy jtag Hardware V1 Now Can I upgrade Easy Jtag Plus Without Any Cost?

[rico_deep]

Originally Posted by blang

yes. but speed will like before.
if you want high speed and other new function then you need new box.
old box will work with new software but function which impossible to release on new hardware will disabled.

fair enough thanks, just got my V1 box, i have 6 months to avail V2 lite kit ($49) ??

Special offer for new users:

- Upgrade Full set for (less than 6 month old boxes) - 109$
- Upgrade lite set for (less than 6 month old boxes) - 49$

[mobirepair]

Originally Posted by blang

yes. but speed will like before.
if you want high speed and other new function then you need new box.
old box will work with new software but function which impossible to release on new hardware will disabled.

Can u mention such main functions which we cant enjoy in new update with old easy jtag box ???

[arturoh]

Originally Posted by mobirepair

Can u mention such main functions which we cant enjoy in new update with old easy jtag box ???

the answer is easy friend, everything that is for usb, everything current, everything relevant, will stop working to force buy

[elpring]

i have old smart card and i want this

Full Box Set :
- Z3X EMMC Socket (BGA153/169, BGA162/186, BGA221, BGA529)
- Easy-JTAG Plus Box Hardware
- USB A-B cable
- Adapters set 5 pcs (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
how much cost this or old smart card will working wituout activation

[modern-mobile]

z3x team I am waiting for the new box.... Thanx

[sharkgsm]

thanks to z3x team,thank to my brother blang :-)

[f0ou4d]

Do we need to bay yearly activation "support access"? and show us " Z3X EMMC Socket "