EMMC adapter for Easy Z3x JTAG Box

[bronce]

Originally Posted by NoName®

Bro , why you wasted so much time , there is easiest way :

pls...need full details/procedures on how to modified that.

[bronce]

Originally Posted by NoName®

No be shure that everything okay there , my self also connecting in that way. But afraid to give solution to users to avoid them lost warranty on box.

need full details/procedures to modified that sir,

[gsmsurfing]

What does it supported?

[rain-man]

Somebody tells me whether with this cable after wiping emmc can we write rom1 and 2 with this cable or another cable and pinout is needed for that?

[concepttheman]

why can't you answer anybody Mr blang. I know you're busy but why don't you just hire somebody to answer some questions at least

[concepttheman]

does anyone know how to hook this up to SPH -L710? I just started taking classes for circuits but this is complicated. on the emmc adapter depends did I did with the VDD and so forth do not match up with what I have on my box. easy repair with the RCP file is writing to the phone but the phone will not boot.
if anyone can help me I will send you money in PayPal 50$. only after it works.

[thyagu2k]

what show this error only i9300 direct emmc,n7100 perfect writing
please help me

Warning: CMD Pullup Level (886 mV) too low , check cables etc.!!!
CMD Active Level:1082 mV
Can't init EMMC, Reason: CMD Timeout Error
===================================
Done.

[omargsm13]

Originally Posted by sl3-nokia

Mod 2 voltage 1.8v and 3.3v , supply direct from box. No need adaptor outside.
Remove two resistor 9 ( not using for pinout jtag) for become NC pin.









This a hard driver?
st transistor, which brand hard drive you get it?

This a hard driver?
st transistor, which brand hard drive you get it?

[ali_GSM98]

but sir pakistan in not soltion
?????????????????????

[dharyadi]

I CONNECT JTAG PINOUT TO SAMSUNG S6810 WITH THIS ADAPTER

PHONE ADAPTER

GND---------> GND
NRST--------> NRTS
TDO---------> TDO
TCK---------> TCK
TDI---------> TDI/DO
TRST--------> TRST/CLK
RTCK--------> RTCK
TMS---------> TMS

RESULT


WITHOUT ADAPTER

RESULT

[tsabila]

@dharyadi...........

chek your pinout adaptor ............

exchange between rtck><tck pinout.............

there must be wrong

[dharyadi]

Working now

for support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. | EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL
check security...ok
initialising: Samsung gt-s6810 config ver.:1.00
i/o level set to : 2200 mv
box s/n: 13ff800954ce828c ,fw ver.: 01.51
connecting to target...
Jtag device: Bcm21654
cpu idcode : 0x4ba00477 mfg.: 0x23b, part: 0xba00, ver.: 0x4
cpu manufacturer: Qualcomm , cpu name: Cortex a9
halting cpu...
Target not examined

look like erom2 erase, so i need emmc pinout for s6810 and erom2 now.

[h.azaraa]

hi
pls upload again pics