Exceeded its maximum estimated device life time

[Taguro-GSMLover]

Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 Mhz
CMD Pullup Level: 1774 mV
CMD Active Level: 1864 mV
EMMC Device Information :
EMMC CID: 90014A483847316505076BA3E07872BD
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G1e , HEX: 483847316500 , S/N: 6BA3E078 , rev. 0x07
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 7/2015
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G1e_6BA3E078_20190222_184730.extcsd
EMMC Init completed.

Warning: Health report is very BAD

Device Life Time Estimation (MLC) [269]: 0x0B Exceeded its maximum estimated device life time
Device Life Time Estimation (SLC) [268]: 0x01 0% - 10% device life time used
Pre EOL information [267]: 0x03 Urgent


How to work on it? Do i need to replece emmc?

[MaClaud1]

Yes bro,
Your emmc ia dead...

Sent from my Pixel 3 using Tapatalk

[Gaelymateo2]

and when rest only 10%?

i hve one that always detect Qualcomm hs usb Qd loader 9008 even after repari by isp

[MaClaud1]

According to HYNIX documentation on that chips - TYPE B is MLC Cells Health Status exceeded its maximum estimated device life time - it means that device used all reserved backup cells for bad block relocation.*

If your device is is 9008 it is very often. I normaly judge without isp. Phone is in 9008 unexpectly? => eMMC issuw

Sent from my Pixel 3 using Tapatalk

[jeevan shakya]

Device Life Time Estimation (MLC) [269]: 0x00 Not defined
Device Life Time Estimation (SLC) [268]: 0x0B Exceeded its maximum estimated device life time
Pre EOL information [267]: 0x01 Normal
sm-g7102 samsung how to salve

[nagesss]

Originally Posted by Taguro-GSMLover

Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 Mhz
CMD Pullup Level: 1774 mV
CMD Active Level: 1864 mV
EMMC Device Information :
EMMC CID: 90014A483847316505076BA3E07872BD
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G1e , HEX: 483847316500 , S/N: 6BA3E078 , rev. 0x07
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 7/2015
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G1e_6BA3E078_20190222_184730.extcsd
EMMC Init completed.

Warning: Health report is very BAD

Device Life Time Estimation (MLC) [269]: 0x0B Exceeded its maximum estimated device life time
Device Life Time Estimation (SLC) [268]: 0x01 0% - 10% device life time used
Pre EOL information [267]: 0x03 Urgent


How to work on it? Do i need to replece emmc?

A .try backup dump of old data first.(for imei AND OTHER IMP DATA)
B>0 size gp partion.(programable only once)
C>write old backup/dump and firmware respectively

if any error occurs during process its a dead emmc.
but try few times worked for me in lots of devices

[layder]

read this, please
https://forum.gsmhosting.com/vbb/f67...tatus-2923093/

[mondalrajib9832]

warning: health report is very bad device life time estimation (mlc) [269]: 0x0b exceeded its maximum estimated device life time device life time estimation (slc) [268]: 0x0b exceeded its maximum estimated device life time pre eol information [267]: 0x01 normal warning health report is very bad // waltone hm4 plus emmc repair