lg h971 rom 2 and 3 dump needed

[simpleprince49]

problem was bootloop no download mode and bootloader lock

tried to write rom1 dump from support but stil the same now I factory format the emmc but I forgot to read the rom 2 and rom 3 to backup
tried to write rom1 dump again..readed in software has good partition and software but phone is not powering on..

logs


Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 Mhz
CMD Pullup Level: 1813 mV
CMD Active Level: 1881 mV
EMMC Device Information :
EMMC CID: 11010030333247373400F53227ED12C3
EMMC CSD: D02700320F5903FFFFFFFFE78640009B
EMMC Manufacture : TOSHIBA , EMMC NAME: 032G74 , HEX: 303332473734 , S/N: F53227ED , rev. 0x00
EMMC Manufacture ID: 0x11 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 1/2015
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: 032G74_F53227ED_20181223_104336.extcsd
EMMC Init completed.
Get firmware version
Brand = google
Manufacturer = LGE
Model = Nexus 5X
Phone platform = msm8992
CPU Abi = arm64-v8a
Android release = 8.1.0
Firmware version = OPM3.171019.013
Firmware date = Wed Dec 13 00:28:59 UTC 2017

[layder]

Originally Posted by simpleprince49

problem was bootloop no download mode and bootloader lock

tried to write rom1 dump from support but stil the same now I factory format the emmc but I forgot to read the rom 2 and rom 3 to backup


Phone platform = msm8992

Qualcomm CPU-based phones have blank ROM2/3 (except Alcatel, Alcatel have IMEI at ROM2)

[simpleprince49]

Originally Posted by layder

Qualcomm CPU-based phones have blank ROM2/3 (except Alcatel, Alcatel have IMEI at ROM2)

thank you how about this correct me if im wrong..

Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot

ive changed its boot configurations to boot from partition 1 but still dead

maybe I have to change emmc?

[layder]

Originally Posted by simpleprince49

thank you how about this correct me if im wrong..

Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot

ive changed its boot configurations to boot from partition 1 but still dead

maybe I have to change emmc?

msm89xx have 0x38 boot config