S3 mini I8190 cant repair boot

[chmsc_ELX]

i need help for this error, i need solution and idea, any one encounter like this before?

logs:

EasyJtag Suite ver.: 1.0.107.3 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
Successefuly connected to box on COM31
Box S/N: ****************, ,FW Ver.: 01.48
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial :****** , ver: 22
Loading repair file: 'C:\Program Files\Z3X\EASYJTAG\Repair Files\GT-I8190\Samsung GT-i8190_BOOT_V1.00.rcp'
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-I8190, Ver.: 1.01
Repair file options. : NONE
Easy-Repair file load OK!
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.107.3 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).

For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Check security...OK
Initialising: SAMSUNG GT-I8190 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: ************** ,FW Ver.: 01.48
Connecting to Target...
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
JTAG device: U8500
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
JTAG device: U8500
CPU IDCODE : 0x62286041 Mfg.: 0x020, Part: 0x2286, Ver.: 0x6
CPU Manufacturer: SGS/Thomson , CPU Name: NOVATHOR U8500 JRC
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
Timeout Error while reading approx : 0x00000008 bytes over DCC
ERROR: No loader answer
DCC Loader init Failed!
BUG: emmc unknown controller initialization failure

trying to write dump but not so lucky.. easy jtag box not writing a dump file.. is my box have a problem

dump file loaded ok... after this line no logs comes up for failed and success.. same logs yesterday when i am doing the s100 flare no dump file writing..

[chmsc_ELX]

writing dump............ device not detected..

Timeout Error while reading approx : 0x00000008 bytes over DCC
ERROR: No loader answer
DCC Loader init Failed!
BUG: emmc unknown controller initialization failure
Checking NAND Image : C:\Documents and Settings\Blaze87\My Documents\PC Backup\GSM TOOLS\Z3x\Easy Dump File\SAM\GT-i8190\512mb_OK_locked.bin
File successefuly loaded!
Writing memory from file...C:\Documents and Settings\Blaze87\My Documents\PC Backup\GSM TOOLS\Z3x\Easy Dump File\SAM\GT-i8190\512mb_OK_locked.bin
Default flash memory device are not detected...