samsung J700F dump write done but set dead

[alamtelecom458]

room 1 room 2 write sucsess but no going DL mode

dead set in my hend by roog BL write

EasyJtag Suite Classic ver.: 2.5.0.7 / wxWidgets 3.1.0-W-U started.
OS ver.: Windows 7 (build 7601, Service Pack 1). Admin rights OK
undefined
Android Explorer ver.: 1.0.0.23
eMMC ODIN ver.: 1.0.11.2
Successfully connected to box on COM31
Box S/N: 0E011019F88BC94E, ,FW Ver.: 01.58
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.1.0, are OK
Z3X Card Serial : AA97-E809 , ver: 22
Z3X Card Activation [LG] : NOT ACTIVATED
Z3X Card Activation [SAMS] : NOT ACTIVATED
Z3X Card Activation [JTAG] : ACTIVATED


Z3X EasyJtag Software ver. 2.5.0.7

Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 0E011019F88BC94E, ,FW Ver.: 01.58
CMD Pullup Level:371 mV
CMD Active Level:1515 mV
Box IO Level:1850 mV
CLK Rate:1000 khz
HiPower mode is off!
---------- eMMC Device Information ----------

EMMC CID : 11010034303030373300B6A23759A23A
EMMC CSD : D07E00320F5903FFFFFFFFE78A4000D0
EMMC Manufacturer ID: 0011 , OEM ID: 0100
EMMC Date: 10/2015 Rev.0x0
EMMC NAME: 400073 , S/N: 3064084313
EMMC NAME (HEX): 34303030373300
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: 400073_3064084313_20170421_1901.extcsd
Done.