Galaxy Nexus i9250 IMEI REPAIR PROBLEM

[lmrbrazil]

Hello Team,

I'm trying to repair the IMEI on my phone but had no success.

I did the following steps.

1> Reflash with support firmaware - GT-I9250_for_IMEI_repair.oct

2> Repair IMEI - I started the process with the USB cable (Samsung U9).

3> After the unit restarts I change the cable to Micro UART C3300k and nothing else happens.

What am I doing wrong?

Micro UART
Link > REXTOR Samsung Micro UART (C3300k) Cable

[Octopus box]

Please post here full software log with Repair IMEI procedure and post here '*.log" and "*.logx" files from "c:\Program Files\GsmServer\OctopusSamsung\LOG\".

[lmrbrazil]

Originally Posted by Octopus box

Please post here full software log with Repair IMEI procedure and post here '*.log" and "*.logx" files from "c:\Program Files\GsmServer\OctopusSamsung\LOG\".

LOG
----
Log file "C:\Program Files (x86)\GsmServer\OctopusSamsung\LOG\13-08-2012_18-22-19.log" created (13/08/2012 18:22:22).
INFO : 13/08/2012 18:22:23 > Set up system language English (file: English.ini)
INFO : 13/08/2012 18:22:23 > Welcome to Octopus Box Samsung software version 1.5.5
INFO : 13/08/2012 18:50:59 > -----------------------------------------------------------------------------------
INFO : 13/08/2012 18:50:59 > Platform: Samsung Android
INFO : 13/08/2012 18:50:59 > Selected port: COM1
INFO : 13/08/2012 18:50:59 > Selected model: GT-I9250
INFO : 13/08/2012 18:50:59 > Old IMEI: Unknown
INFO : 13/08/2012 18:50:59 > New IMEI: 35XXX-04-04XXXX-3
WARN : 13/08/2012 18:51:00 > Put phone in Download mode: "Volume down" + "Power button" keys, and connect USB cable.
INFO : 13/08/2012 18:51:01 > Phone found.
INFO : 13/08/2012 18:51:01 > Writing EFS section...
INFO : 13/08/2012 18:51:05 > EFS section has been written successfully.
WARN : 13/08/2012 18:51:05 > Please disconnect USB cable.
WARN : 13/08/2012 18:51:31 > After phone reboot and power on, please conect it to box via COM cable.
INFO : 13/08/2012 18:51:31 > Searching for phone. Please wait...
INFO : 13/08/2012 19:27:00 > IMEI write canceled.
Log file "C:\Program Files (x86)\GsmServer\OctopusSamsung\LOG\13-08-2012_18-22-19.log" closed (13/08/2012 19:27:08).
------

I changed the IMEI in this log.

[lmrbrazil]

Originally Posted by Octopus box

Please post here full software log with Repair IMEI procedure and post here '*.log" and "*.logx" files from "c:\Program Files\GsmServer\OctopusSamsung\LOG\".

.logx is here.

link > http://dl.dropbox.com/u/63818676/13-..._18-22-19.logx

[Octopus box]

Please try to perform next steps, and then Repair IMEI.
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "UART" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set speed to 115200.

[lmrbrazil]

Originally Posted by Octopus box

9. Go to dial window.
10. Enter "*#9090#" number.
11. Set speed to 115200.

After this step is necessary to access the menu.

This menu has five options.
- END
- Back
- Key Input
- Select
- Help

where should I put the value of 115200?

[Octopus box]

Please write "GT-I9250_for_IMEI_repair.oct"(don't skip boot). Because after writing this firmware when you type "*#9090#" number must appear menu with "DIAG CONFING", where You can set speed to 115200.

[lmrbrazil]

Originally Posted by Octopus box

Please write "GT-I9250_for_IMEI_repair.oct"(don't skip boot). Because after writing this firmware when you type "*#9090#" number must appear menu with "DIAG CONFING", where You can set speed to 115200.

I repeated the process, and nothing has changed.
The option "DIAG CONFING" does not appear.

The process of installing the firmware should be done with the SIM card in the device?

[lmrbrazil]

Here is the .log
----------
Log file "C:\Program Files\GsmServer\OctopusSamsung\LOG\17-08-2012_09-46-33.log" created (17/08/2012 09:46:36).
INFO : 17/08/2012 09:46:37 > Set up system language Portuguese (file: Portuguese.ini)
INFO : 17/08/2012 09:46:37 > Welcome to Octopus Box Samsung software version 1.4.8
INFO : 17/08/2012 09:46:46 > Set up system language English (file: English.ini)
INFO : 17/08/2012 09:48:02 > Selected firmware file: GT-I9250_for_IMEI_repair.oct
WARN : 17/08/2012 09:48:18 > Please put your phone in download mode and connect to PC.
WARN : 17/08/2012 09:48:18 > To put GT-I9250 phone into download mode you have to perform the following steps:
WARN : 17/08/2012 09:48:18 > 1. Reconnect phone battery.
WARN : 17/08/2012 09:48:18 > 2. Press and hold "Volume - " + "Power" buttons.
INFO : 17/08/2012 09:48:18 > Found phone on
INFO : 17/08/2012 09:48:18 > Firmware write started.
INFO : 17/08/2012 09:48:18 > Writing PIT section...
INFO : 17/08/2012 09:48:23 > PIT section has been written successfully.
INFO : 17/08/2012 09:48:23 > Writing xloader section...
INFO : 17/08/2012 09:48:25 > xloader section has been written successfully.
INFO : 17/08/2012 09:48:25 > Writing boot section...
INFO : 17/08/2012 09:48:28 > boot section has been written successfully.
INFO : 17/08/2012 09:48:28 > Writing recovery section...
INFO : 17/08/2012 09:48:30 > recovery section has been written successfully.
INFO : 17/08/2012 09:48:31 > Writing system section...
INFO : 17/08/2012 09:49:27 > system section has been written successfully.
INFO : 17/08/2012 09:49:27 > Writing userdata section...
INFO : 17/08/2012 09:50:01 > userdata section has been written successfully.
INFO : 17/08/2012 09:50:01 > Writing radio section...
INFO : 17/08/2012 09:50:06 > radio section has been written successfully.
INFO : 17/08/2012 09:50:06 > Writing cache section...
INFO : 17/08/2012 09:50:09 > cache section has been written successfully.
INFO : 17/08/2012 09:50:09 > Firmware writing successfully completed.
Log file "C:\Program Files\GsmServer\OctopusSamsung\LOG\17-08-2012_09-46-33.log" closed (17/08/2012 09:52:53).
---------

here is .logx > http://dl.dropbox.com/u/63818676/17-..._09-46-33.logx

[lmrbrazil]

Originally Posted by Octopus box

Please write "GT-I9250_for_IMEI_repair.oct"(don't skip boot). Because after writing this firmware when you type "*#9090#" number must appear menu with "DIAG CONFING", where You can set speed to 115200.

I repeated the process, and nothing has changed.
The option "DIAG CONFING" does not appear.

The process of installing the firmware should be done with the SIM card in the device?

[lmrbrazil]

Originally Posted by lmrbrazil

I repeated the process, and nothing has changed.
The option "DIAG CONFING" does not appear.

The process of installing the firmware should be done with the SIM card in the device?

can anyone help me please?

[Eduardo_k]

Originally Posted by lmrbrazil

can anyone help me please?

Dear friend i Was the same problem, only change the cable and problem solved

[MPhoneClinic]

Originally Posted by lmrbrazil

can anyone help me please?

i found that C3300k cable for Z3 box is dont have the +5V connected from pin 1 to 5. connect those pins and it works 100%. see the picture!

BR,
Mphoneclinic

[sun18il]

in z3x box there is 2 type of micro uart cable is there 1 is c3300k and another is autoignition micro uart use that it will work 100%

[mauriciopineros]

Originally Posted by MPhoneClinic

i found that C3300k cable for Z3 box is dont have the +5V connected from pin 1 to 5. connect those pins and it works 100%. see the picture!

BR,
Mphoneclinic

Welcome to Octopus Box Samsung software version 1.6.6
Selected firmware file: GT-I9250_for_IMEI_repair.oct
Please switch your phone to the download mode and connect it to a
PC.
To put GT-I9250 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Power" buttons.
Found phone on
Firmware write started.
Writing PIT section...
PIT section has been written successfully.
Writing xloader section...
xloader section has been written successfully.
Writing boot section...
boot section has been written successfully.
Writing recovery section...
recovery section has been written successfully.
Writing system section...
system section has been written successfully.
Writing userdata section...
userdata section has been written successfully.
Writing radio section...
radio section has been written successfully.
Writing cache section...
cache section has been written successfully.
Firmware writing successfully completed.
-----------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM110
Selected model: GT-I9250
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Mon Nov 21 16:28:04 KST 2011
Phone SN: 00000000000
Android version: 4.0.1 (ICL23D)
-----------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM110
Selected model: GT-I9250
Old IMEI: Unknown
New IMEI: 351554-05-563048-8
Put phone in Download mode: "Volume down" + "Power button"
keys, and connect USB cable.
Phone found.
Writing EFS section...
EFS section has been written successfully.
Please disconnect USB cable.
After phone reboot and power on, please conect it to box via COM
cable.
Searching for a phone. Please wait...
IMEI write canceled.
-----------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM110
Selected model: GT-I9250
Old IMEI: Unknown
New IMEI: 351554-05-563048-8
Put phone in Download mode: "Volume down" + "Power button"
keys, and connect USB cable.
Phone found.
Writing EFS section...
EFS section has been written successfully.
Please disconnect USB cable.
After phone reboot and power on, please conect it to box via COM
cable.
Searching for a phone. Please wait...
Phone found.
Writing new IMEI. Please wait...
Wrong AK number
Write IMEI failed
-----------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: GT-I9250
Old IMEI: Unknown
New IMEI: 351554-05-563048-8
Put phone in Download mode: "Volume down" + "Power button"
keys, and connect USB cable.
Phone found.
Writing EFS section...
EFS section has been written successfully.
Please disconnect USB cable.
After phone reboot and power on, please conect it to box via COM
cable.
Searching for a phone. Please wait...
Phone found.
Writing new IMEI. Please wait...
New IMEI successfully written.
Please, restart the phone to apply changes