j737a read codes by server but wrong codes [Solved] - GSM-Forum

lemessitelecom · 08-16-2019, 12:44

Welcome to Octoplus Box Samsung software version 2.8.1
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: SM-J737A
Operation: Read info
Reading info, please wait...
Proper android device not found. Make sure that "USB debug" option on
the device is turned on.
Performed by 2.8.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: SM-J737A
Operation: Read Codes - Server
Detected phone model: SM-J737A
Firmware compiled date: Fri Jan 18 17:37:08 KST 2019
PDA version: J737AUCU3ASA2
CSC version: J737AATT3ASA2
SW version: J737AUCU3ARJ1
Phone SN: R58KA5BW4RH
Android version: 8.0.0 (R16NW)
Sales code: ATT
Country: USA
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2019-01-01
Warranty Void: 0
SIM 1 status: network locked
Codename: j7toplteuc
-----------------------------------------------------------------------------------
Connecting to server ..
Username: loj9fo3
Connect to server successfull.
Checking smart card...
Smart card successfully checked.
Your balance: 141 credits.
-----------------------------------------------------------------------------------
Checking operation...OK
Initializing...OK
Rebooting phone
Searching for a phone. Please wait...OK
Please keep phone's screen active!
Initializing exploit...OK
Initializing...OK
"Read Codes" operation will take 100 credits. Continue?
Reading phone unlock codes. This can take some time, please wait...
FREEZE: 52004493
NET LOCK: 07559948
SUB LOCK: 00000000
SP LOCK: 00000000
CP LOCK: 00000000
SIM LOCK: 00000000
Performed by 2.8.1 Software version.

Octopus support · 08-16-2019, 12:59

Hello.

Please insert SIM card and make a video with phone's screen, where we can see, how you enter codes from the log, then send us link with video we will check.

huanitgsm · 08-16-2019, 13:01

codes wrong no ok,
Platform: Samsung Android
Selected port: COM61
Selected model: SM-J737A
Operation: Read Codes - Server
Please, press "OK" button on the phone to allow USB debugging.
Please, press "OK" button on the phone to allow USB debugging.
Proper android device not found. Make sure that "USB debug" option on the device is turned on.
Read codes failed
Performed by 2.8.1.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM61
Selected model: SM-J737A
Operation: Read Codes - Server
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-J737A
Firmware compiled date: Mon Dec 10 14:10:56 KST 2018
PDA version: J737AUCS3ARL2
CSC version: J737AATT3ARL2
SW version: J737AUCS3ARL2
Phone SN: R58KA7E3WLT
Android version: 8.0.0 (R16NW)
Sales code: ATT
Country: USA
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2018-12-01
Warranty Void: 0
SIM 1 status: absent
Codename: j7toplteuc
-----------------------------------------------------------------------------------
Connecting to server ..
Username: huanit
Connect to server successfull.
Checking smart card...
Smart card successfully checked.
Your balance: 105 credits.
-----------------------------------------------------------------------------------
Checking operation...OK
Initializing...OK
Rebooting phone
Searching for a phone. Please wait...OK
Please keep phone's screen active!
Initializing exploit...OK
Initializing...OK
"Read Codes" operation will take 100 credits. Continue?
Reading phone unlock codes. This can take some time, please wait...
FREEZE: 85337228
NET LOCK: 07559440
SUB LOCK: 00000000
SP LOCK: 00000000
CP LOCK: 00000000
SIM LOCK: 00000000
Performed by 2.8.1.1 Software version.

lemessitelecom · 08-16-2019, 14:22

https://drive.google.com/file/d/1ygj...ew?usp=sharing

lemessitelecom · 08-16-2019, 15:59

any news ? sorry but my client is waiting

Octopus support · 08-20-2019, 14:14

Hello.

In latest test Software version 2.8.1.3 we improved Read codes operation for U1, U2 and U3 binary. For U4 binary need to write modem from combination which can download in Support Area (support/samsung/for unlock and repair/SM-J737A/modem_J737AUCU4ASD1).

RussianIce · 09-02-2019, 00:36

Quote:

Originally Posted by Octopus support

Hello.

In latest test Software version 2.8.1.3 we improved Read codes operation for U1, U2 and U3 binary. For U4 binary need to write modem from combination which can download in Support Area (support/samsung/for unlock and repair/SM-J737A/modem_J737AUCU4ASD1).

I have same problem, and flashed the modem you mention. I got charged twice (100 and 100) credits. And came out with the same code that is not working.

Welcome to Octoplus Box Samsung software version 2.8.2
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM9
Selected model: SM-J737A
Operation: Read Codes - Server
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-J737A
Firmware compiled date: Mon Dec 10 14:10:56 KST 2018
PDA version: J737AUCS3ARL2
CSC version: J737AATT3ARL2
SW version: J737AUCS3ARL2
Phone SN: R58KB389ZSN
Android version: 8.0.0 (R16NW)
Sales code: ATT
Country: USA
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2018-12-01
Warranty Void: 0
SIM 1 status: network locked
Codename: j7toplteuc
-----------------------------------------------------------------------------------
Connecting to server ..
Username: ZheniaRuss80
Connect to server successfull.
Checking smart card...
Smart card successfully checked.
Your balance: 312 credits.
-----------------------------------------------------------------------------------
Checking operation...OK
Initializing...OK
Rebooting phone
Searching for a phone. Please wait...OK
Please keep phone's screen active!
Initializing exploit...OK
Initializing...OK
Security checking...OK
"Read Codes" operation will take 100 credits. Continue?
Reading phone unlock codes. This can take some time, please wait...
FREEZE: 07550977
NET LOCK: 07550977
SUB LOCK: 00000000
SP LOCK: 00000000
CP LOCK: 00000000
SIM LOCK: 00000000
Performed by 2.8.2 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM9
Selected model: SM-J737A
Operation: Read Codes - Server
Proper android device not found. Make sure that "USB debug" option on
the device is turned on.
Read codes failed
Performed by 2.8.2 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM9
Selected model: SM-J737A
Operation: Read Codes - Server
Detected phone model: SM-J737A
Firmware compiled date: Mon Dec 10 14:10:56 KST 2018
PDA version: J737AUCS3ARL2
CSC version: J737AATT3ARL2
SW version: J737AUCS3ARL2
Phone SN: R58KB389ZSN
Android version: 8.0.0 (R16NW)
Sales code: ATT
Country: USA
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2018-12-01
Warranty Void: 0
SIM 1 status: absent
Codename: j7toplteuc
-----------------------------------------------------------------------------------
Connecting to server ..
Username: ZheniaRuss80
Connect to server successfull.
Checking smart card...
Smart card successfully checked.
Your balance: 212 credits.
-----------------------------------------------------------------------------------
Checking operation...OK
Initializing...OK
Please keep phone's screen active!
Initializing exploit...OK
Initializing...OK
Security checking...OK
Operation was canceled
Read codes failed
Performed by 2.8.2 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM9
Selected model: SM-J737A
Operation: RMM Unlock
Detected phone model: SM-J737A
Firmware compiled date: Mon Dec 10 14:10:56 KST 2018
PDA version: J737AUCS3ARL2
CSC version: J737AATT3ARL2
SW version: J737AUCS3ARL2
Phone SN: R58KB389ZSN
Android version: 8.0.0 (R16NW)
Sales code: ATT
Country: USA
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2018-12-01
Warranty Void: 0
SIM 1 status: absent
Codename: j7toplteuc
Device firmware is currently not supported
Operation was failed!
Performed by 2.8.2 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM9
Selected model: SM-J737A
Operation: Reboot Download
Detected phone model: SM-J737A
Firmware compiled date: Mon Dec 10 14:10:56 KST 2018
PDA version: J737AUCS3ARL2
CSC version: J737AATT3ARL2
SW version: J737AUCS3ARL2
Phone SN: R58KB389ZSN
Android version: 8.0.0 (R16NW)
Sales code: ATT
Country: USA
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2018-12-01
Warranty Void: 0
SIM 1 status: absent
Codename: j7toplteuc
Rebooting phone in Download Mode...
Phone successfully rebooted in Download Mode.
Performed by 2.8.2 Software version.
Selected CP file: C:\Users\Latitude\Downloads
\modem_J737AUCU4ASD1.tar
Please put the phone into Download Mode and connect USB cable.
To put SM-J737A into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.
Performed by 2.8.2 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM10
Selected model: SM-J737A
Operation: Read Codes - Server
Detected phone model: SM-J737A
Firmware compiled date: Mon Dec 10 14:10:56 KST 2018
PDA version: J737AUCS3ARL2
CSC version: J737AATT3ARL2
SW version: J737AUCU4ASD1
Phone SN: R58KB389ZSN
Android version: 8.0.0 (R16NW)
Sales code: ATT
Country: USA
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2018-12-01
Warranty Void: 0
SIM 1 status: absent
Codename: j7toplteuc
-----------------------------------------------------------------------------------
Connecting to server ..
Username: ZheniaRuss80
Connect to server successfull.
Checking smart card...
Smart card successfully checked.
Your balance: 212 credits.
-----------------------------------------------------------------------------------
Checking operation...OK
Initializing...OK
Please keep phone's screen active!
Initializing exploit...OK
Initializing...OK
Security checking...OK
"Read Codes" operation will take 100 credits. Continue?
Reading phone unlock codes. This can take some time, please wait...
FREEZE: 07550977
NET LOCK: 07550977
SUB LOCK: 00000000
SP LOCK: 00000000
CP LOCK: 00000000
SIM LOCK: 00000000
Performed by 2.8.2 Software version.
-----------------------------------------------------------------------------------
Connecting to server...
Username: ZheniaRuss80
Authorizing...
Checking balance...
Your balance: 112 credits.
Performed by 2.8.2 Software version.

RussianIce · 09-02-2019, 18:51

Any update on this??

Octopus box · 09-03-2019, 07:44

We are researching where can be the problem, stay tuned for future updates

Octopus box · 09-03-2019, 09:36

Please, contact with us via Skype, we will check where can be the problem remotely

RussianIce · 09-05-2019, 01:39

Quote:

Originally Posted by Octopus box

Please, contact with us via Skype, we will check where can be the problem remotely

Just sent you message on Skype. Eugene M (RussianIce)

RussianIce · 09-05-2019, 13:11

Problem solved, thanks Octopus team.!!

08-16-2019, 12:44	#1 (permalink)
lemessitelecom Freak Poster Join Date: Mar 2013 Location: Dakar (Senegal - Dakar) Posts: 122 Member: 1896036 Status: Offline Thanks Meter: 2	j737a read codes by server but wrong codes [Solved] Welcome to Octoplus Box Samsung software version 2.8.1 ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM3 Selected model: SM-J737A Operation: Read info Reading info, please wait... Proper android device not found. Make sure that "USB debug" option on the device is turned on. Performed by 2.8.1 Software version. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM3 Selected model: SM-J737A Operation: Read Codes - Server Detected phone model: SM-J737A Firmware compiled date: Fri Jan 18 17:37:08 KST 2019 PDA version: J737AUCU3ASA2 CSC version: J737AATT3ASA2 SW version: J737AUCU3ARJ1 Phone SN: R58KA5BW4RH Android version: 8.0.0 (R16NW) Sales code: ATT Country: USA HW platform: exynos5 HW Chip: exynos7870 HW Modem: SHANNON315 Security patch level: 2019-01-01 Warranty Void: 0 SIM 1 status: network locked Codename: j7toplteuc ----------------------------------------------------------------------------------- Connecting to server .. Username: loj9fo3 Connect to server successfull. Checking smart card... Smart card successfully checked. Your balance: 141 credits. ----------------------------------------------------------------------------------- Checking operation...OK Initializing...OK Rebooting phone Searching for a phone. Please wait...OK Please keep phone's screen active! Initializing exploit...OK Initializing...OK "Read Codes" operation will take 100 credits. Continue? Reading phone unlock codes. This can take some time, please wait... FREEZE: 52004493 NET LOCK: 07559948 SUB LOCK: 00000000 SP LOCK: 00000000 CP LOCK: 00000000 SIM LOCK: 00000000 Performed by 2.8.1 Software version.

08-16-2019, 12:59	#2 (permalink)
Octopus support Product Supporter Join Date: Jan 2019 Location: USA, New York Posts: 10,163 Member: 2891705 Status: Offline Thanks Meter: 2,142	Hello. Please insert SIM card and make a video with phone's screen, where we can see, how you enter codes from the log, then send us link with video we will check.

08-16-2019, 13:01	#3 (permalink)
huanitgsm Insane Poster Join Date: Nov 2012 Posts: 66 Member: 1843619 Status: Offline Thanks Meter: 4	codes wrong no ok, Platform: Samsung Android Selected port: COM61 Selected model: SM-J737A Operation: Read Codes - Server Please, press "OK" button on the phone to allow USB debugging. Please, press "OK" button on the phone to allow USB debugging. Proper android device not found. Make sure that "USB debug" option on the device is turned on. Read codes failed Performed by 2.8.1.1 Software version. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM61 Selected model: SM-J737A Operation: Read Codes - Server Please, press "OK" button on the phone to allow USB debugging. Detected phone model: SM-J737A Firmware compiled date: Mon Dec 10 14:10:56 KST 2018 PDA version: J737AUCS3ARL2 CSC version: J737AATT3ARL2 SW version: J737AUCS3ARL2 Phone SN: R58KA7E3WLT Android version: 8.0.0 (R16NW) Sales code: ATT Country: USA HW platform: exynos5 HW Chip: exynos7870 HW Modem: SHANNON315 Security patch level: 2018-12-01 Warranty Void: 0 SIM 1 status: absent Codename: j7toplteuc ----------------------------------------------------------------------------------- Connecting to server .. Username: huanit Connect to server successfull. Checking smart card... Smart card successfully checked. Your balance: 105 credits. ----------------------------------------------------------------------------------- Checking operation...OK Initializing...OK Rebooting phone Searching for a phone. Please wait...OK Please keep phone's screen active! Initializing exploit...OK Initializing...OK "Read Codes" operation will take 100 credits. Continue? Reading phone unlock codes. This can take some time, please wait... FREEZE: 85337228 NET LOCK: 07559440 SUB LOCK: 00000000 SP LOCK: 00000000 CP LOCK: 00000000 SIM LOCK: 00000000 Performed by 2.8.1.1 Software version.

08-16-2019, 14:22	#4 (permalink)
lemessitelecom Freak Poster Join Date: Mar 2013 Location: Dakar (Senegal - Dakar) Posts: 122 Member: 1896036 Status: Offline Thanks Meter: 2	https://drive.google.com/file/d/1ygj...ew?usp=sharing

08-16-2019, 15:59	#5 (permalink)
lemessitelecom Freak Poster Join Date: Mar 2013 Location: Dakar (Senegal - Dakar) Posts: 122 Member: 1896036 Status: Offline Thanks Meter: 2	any news ? sorry but my client is waiting

08-20-2019, 14:14	#6 (permalink)
Octopus support Product Supporter Join Date: Jan 2019 Location: USA, New York Posts: 10,163 Member: 2891705 Status: Offline Thanks Meter: 2,142	Hello. In latest test Software version 2.8.1.3 we improved Read codes operation for U1, U2 and U3 binary. For U4 binary need to write modem from combination which can download in Support Area (support/samsung/for unlock and repair/SM-J737A/modem_J737AUCU4ASD1).

09-02-2019, 18:51	#8 (permalink)
RussianIce Freak Poster Join Date: Mar 2015 Posts: 138 Member: 2366664 Status: Offline Sonork: 100.1663562 Thanks Meter: 4	Any update on this??

09-03-2019, 07:44	#9 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,850 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	We are researching where can be the problem, stay tuned for future updates

09-03-2019, 09:36	#10 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,850 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Please, contact with us via Skype, we will check where can be the problem remotely

09-05-2019, 13:11	#12 (permalink)
RussianIce Freak Poster Join Date: Mar 2015 Posts: 138 Member: 2366664 Status: Offline Sonork: 100.1663562 Thanks Meter: 4	Problem solved, thanks Octopus team.!!