T-999V unlock

[dino_d]

Welcome to Octoplus/Octopus Box Samsung software version 2.4.6
-----------------------------------------------------------------------------------
To connect SM-G900W8 phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SGH-T999V phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#7284#" number.
12. Set "UART" to "PDA" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: SGH-T999V
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM38
Mode: Normal
Phone model: SGH-T999
Warning: Selected model (SGH-T999V) differs from the detected one
(SGH-T999)!
Firmware compiled date: May 06 2014
Firmware compiled time: 02:00:00
Firmware released date: Aug 18 2014
Firmware released time: 22:33:25
Phone IMEI: 353102-05-094415-3
SW version: M8960A-AAAANAZM-1.0.443139
Performed by 2.4.6 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM38
Selected model: SGH-T999V
Reading info...
Mode: Normal
Firmware compiled date: May 06 2014
Firmware compiled time: 02:00:00
Firmware released date: Aug 18 2014
Firmware released time: 22:33:25
SW Version: M8960A-AAAANAZM-1.0.443139
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: SGH-T999V
Firmware compiled date: Mon Aug 18 21:59:07 KST 2014
PDA version: T999VVLUFNH2
CSC version: T999VYVLFNH2
SW version: T999VVLUFNH2
Phone IMEI: 353102050944153
Phone SN: R28F407358K
Android version: 4.4.2 (KOT49H)
Sales code: GLW
Country: Canada
HW platform: msm8960
HW Chip: MSM8960
HW Modem: MSM8960
Codename: d2vw
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as Security-SGH-T999V-05-01-2017_10-46-34 file
Unlocking phone...
Phone will restart now. Please don't disconnect cable!
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.4.6 Software version.

The phone is still locked and read codes button doesnt even work ( its not clickable), had the same issue few days ago with S5 but after flashing it with a file from your website it got unlocked. I cant always sell a story to the customer that his/her phone need to be flashed in order to be unlocked, some people have stuff on their phones.

[Octopus box]

Hello.

Please install the latest Software version and try to make "Unlock"/"Read Codes" again. If code request will remain after "Unlock" operation - try to enter 00000000, 11111111 and 12345678 codes.
Writing of a firmware via "Write Firmware" operation should not affect user data on phone.