TCD128/SN call customer service - GSM-Forum

ambot · 04-07-2002, 01:25

this is my first attemp to repair a savvy phone...so, i need your advice on how to repair this phone problem... thanks in advance for any help...

speed · 04-11-2002, 01:59

Try using Andromeda software

HFP · 04-11-2002, 05:34

And if not help try Martech or Savvy Editor( read and write section 21)
WBR.
Peter

trafix · 04-11-2002, 09:10

just use savvy maker pre, repair call customer service

ambot · 04-11-2002, 19:59

hi speed, i got andromeda sw but this sw hungs everytime i tried to use it... i already readed the flash ram and data ram of the savvy phone and i don't know what other sw that can remove call *******r service...

speed · 04-12-2002, 01:34

Actually, I have two Savvy by Andromeda
- Philip Savvy Service Software 3.1 New
- Philip Savvy Service Software 3.1 Old
But both work fine, just load the software, then connect cable to phone (phone off), then turn on phone (phone will go on TAT mode), then select repair

You can also use:
- Philip Savvy 5.2 by Martech
- Philip Savvy Maker 4.01 by Bartek
- Philip Savvy TCD SEC Works by PRO

mru · 04-12-2002, 17:17

Try to flash it flash it and write eeprom.

ambot · 04-12-2002, 19:50

Thanks to all... i solved the problem using savvy maker 4.01 by bartek and a cable with external power supply... and to the simple instruction from speed...

BTW, what causes the "call customer service" in philips phone?

speed · 04-12-2002, 23:09

If you try to enter the wrong NCK code for 5 times

ambot · 04-13-2002, 04:41

Thanks alot speed...

04-07-2002, 01:25	#1 (permalink)
ambot No Life Poster Join Date: Apr 2001 Location: Philippines Posts: 535 Member: 4274 Status: Offline Thanks Meter: 18	TCD128/SN call customer service this is my first attemp to repair a savvy phone...so, i need your advice on how to repair this phone problem... thanks in advance for any help...

04-12-2002, 19:50	#8 (permalink)
ambot No Life Poster Join Date: Apr 2001 Location: Philippines Posts: 535 Member: 4274 Status: Offline Thanks Meter: 18	Thanks to all... i solved the problem using savvy maker 4.01 by bartek and a cable with external power supply... and to the simple instruction from speed... BTW, what causes the "call customer service" in philips phone? Last edited by ambot; 04-12-2002 at 20:44.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Azalis TCD238 - Call Customer Service - how to remove?	Bogi	Philips	16	08-24-2001 16:52
SAVVY TCD128/BL call customer serive	AMTX99	Various	5	11-10-2000 10:57
TCD128 h9 Call Customer Service How insert in this phone PCK code? THANKS!!	TNT	Various	3	08-24-2000 01:09
call customer service 168\at...help	kosta	Various	0	08-23-2000 09:42
Solution For Savvy tcd128h9 Call Customer Service?	TNT	Various	0	08-13-2000 22:56

04-11-2002, 01:59	#2 (permalink)
speed No Life Poster Join Date: Feb 2000 Location: Greenhills Posts: 530 Member: 936 Status: Offline Thanks Meter: 2	Try using Andromeda software

04-11-2002, 05:34	#3 (permalink)
HFP No Life Poster Join Date: Mar 2001 Location: Ukraine,Kiev Age: 48 Posts: 1,605 Member: 3529 Status: Offline Thanks Meter: 1	And if not help try Martech or Savvy Editor( read and write section 21) WBR. Peter

04-11-2002, 09:10	#4 (permalink)
trafix No Life Poster Join Date: Jun 2001 Location: Philippines Age: 47 Posts: 942 Member: 4873 Status: Offline Thanks Meter: 5	just use savvy maker pre, repair call customer service

04-11-2002, 19:59	#5 (permalink)
ambot No Life Poster Join Date: Apr 2001 Location: Philippines Posts: 535 Member: 4274 Status: Offline Thanks Meter: 18	hi speed, i got andromeda sw but this sw hungs everytime i tried to use it... i already readed the flash ram and data ram of the savvy phone and i don't know what other sw that can remove call *******r service...

04-12-2002, 01:34	#6 (permalink)
speed No Life Poster Join Date: Feb 2000 Location: Greenhills Posts: 530 Member: 936 Status: Offline Thanks Meter: 2	Actually, I have two Savvy by Andromeda - Philip Savvy Service Software 3.1 New - Philip Savvy Service Software 3.1 Old But both work fine, just load the software, then connect cable to phone (phone off), then turn on phone (phone will go on TAT mode), then select repair You can also use: - Philip Savvy 5.2 by Martech - Philip Savvy Maker 4.01 by Bartek - Philip Savvy TCD SEC Works by PRO

04-12-2002, 17:17	#7 (permalink)
mru Freak Poster Join Date: Nov 2000 Posts: 193 Member: 2515 Status: Offline Thanks Meter: 4	Try to flash it flash it and write eeprom.

04-12-2002, 23:09	#9 (permalink)
speed No Life Poster Join Date: Feb 2000 Location: Greenhills Posts: 530 Member: 936 Status: Offline Thanks Meter: 2	If you try to enter the wrong NCK code for 5 times

04-13-2002, 04:41	#10 (permalink)
ambot No Life Poster Join Date: Apr 2001 Location: Philippines Posts: 535 Member: 4274 Status: Offline Thanks Meter: 18	Thanks alot speed...