htc click tatto unlock problem

[X-TRA]

i try to unlock as the instructions in the exe but its still not error not unlock the tattoo any one confirm it for unlock ?

[Gsm Mardan]

Originally Posted by X-TRA

i try to unlock as the instructions in the exe but its still not error not unlock the tattoo any one confirm it for unlock ?

what error u face in unlock time post full detail ..

[X-TRA]

Originally Posted by **Haq Nawaz**

what error u face in unlock time post full detail ..

EVERY STEP FOR UNLOCK I DONE VERY PERFECTLY
here is log
get sw version
after that there will be on screen
get oemsbl failfound
plz check security flag on/off
press act to exit


waiting for gsm ready


power= refalsh
action= diag

format fat
clean s58 data
unit info

after that
press power to clean s58 data
our action to exit
after press power


verify str not found
CMD:AT@SIMLOCK=7.0


DISABLE SECURITY FLASH FAIL

[X-TRA]

forget to tell you one thing more its software version is 1.6

[Gsm Mardan]

Originally Posted by X-TRA

EVERY STEP FOR UNLOCK I DONE VERY PERFECTLY
here is log
get sw version
after that there will be on screen
get oemsbl failfound
plz check security flag on/off
press act to exit


waiting for gsm ready


power= refalsh
action= diag

format fat
clean s58 data
unit info

after that
press power to clean s58 data
our action to exit
after press power


verify str not found
CMD:AT@SIMLOCK=7.0


DISABLE SECURITY FLASH FAIL

if you have this error with red letters [ at@simlock=7,01 ] [ ok ] [ ] indicates a communication error between phone and flex cable, this mean that your clip works you have just to re-insert the flex cable into the sim slot and try again..

[X-TRA]

Originally Posted by **Haq Nawaz**

if you have this error with red letters [ at@simlock=7,01 ] [ ok ] [ ] indicates a communication error between phone and flex cable, this mean that your clip works you have just to re-insert the flex cable into the sim slot and try again..

YOU MEANS that during the procedure i put out the flex sim and insert it back ?

i also did tries many time but its still not unlock

[Gsm Mardan]

Originally Posted by X-TRA

YOU MEANS that during the procedure i put out the flex sim and insert it back ?

its mean flex cable not connect correct in sim tray .. connect sim dummy tightly in sim tray and post result ......

Regards
Xtc Clip team