[Answered] ZTE EuFi891 - GSM-Forum

kusakhan1 · 03-04-2015, 07:26

How to show port mode this model ZTE EuFi891

**TestBox2** · 03-04-2015, 19:43

Quote:

Originally Posted by kusakhan1

How to show port mode this model ZTE EuFi891

Do not be lazy and do read forum

Look it Mkey Update Thread. solution same as 890L.

**TestBox2** · 03-15-2015, 18:36

HI, i need testing FW Flashing for ZTE 891L , n soon u can download file from support and try write to modem.

Note! All UNDER TEST !!

FW Create W/O modem testion in hands!

Com-port open methodics same as 890L, but try press bidden button W/O connection to usb, and after 30 se**** connect to USB for install COM-Port drivers.

kromoxs · 03-16-2015, 14:36

already on youtube,here https://www.youtube.com/watch?v=U43OmdPYFXE

**TestBox2** · 03-17-2015, 15:54

Hi All anybody plz test 891 - Flashing , file already on support.

kromoxs · 03-22-2015, 14:02

Quote:

Originally Posted by TestBox2

Hi All anybody plz test 891 - Flashing , file already on support.

IMHO,to able to use GSM mode i think need HW modification.
so many chips missing/removed compared with Verizon 890L models.

but its just in my opinion...

**TestBox2** · 03-22-2015, 15:24

Quote:

Originally Posted by kromoxs

IMHO,to able to use GSM mode i think need HW modification.
so many chips missing/removed compared with Verizon 890L models.

but its just in my opinion...

890L <> 891L , but for unlock u can use Mkey, the TESTED!!And flahig / Unlocking / repair half dead without Jtag tested too !!

kromoxs · 03-27-2015, 20:35

Quote:

Originally Posted by TestBox2

890L <> 891L , but for unlock u can use Mkey, the TESTED!!And flahig / Unlocking / repair half dead without Jtag tested too !!

are you sure?891 is uscellular (cdma)..
even unlock its can't use gsm simcard,only cdma
just 2 my cents

kusakhan · 04-01-2015, 09:28

13.22.18 : --------------- Read device information -----------------------
13.22.20 : Model: SCAQWAZM
13.22.20 : IMEI: 990003-22-964703-0
13.22.20 : Version ID: BD_PTCL_EuFi891V1.0.0B04
13.22.20 : Software ID: BD_PTCL_EUFI891V1.0.1B01
13.22.21 : Router WiFi Password: admin
13.22.21 : Firmware ID: BD_PTCL_EUFI891V1.0.0B04
13.22.21 : Build: NOV 7 201417:20:17MAY 18 201200:00:00
13.22.21 : --------------- Flash-mode operations ------------------------
13.22.55 : Upload APP Loader... OK
13.23.05 : Init.Flash: HYNIX_HY27SF081G2AD
13.23.07 : Write Part0...[PARTITION] . Ok
13.23.11 : Write Part1...[DBL] Ok
13.23.18 : Write Part2...[FSBL] Ok
13.23.24 : Write Part3...[OSBL] Ok
13.23.32 : Write Part4...[AMSS] Ok
13.23.45 : Write Part5...[DSP1] Ok
13.23.59 : Write Part6...[DSP2] Ok
13.26.52 : SelfTest ... Filed
13.27.33 : - Flashing Completed!
13.27.35 : --------------------------- E N D. --------------------------------

kusakhan · 04-01-2015, 09:56

After flash Not open web interface only open this page

http://uscc.hotspot/company_use.asp

http://imgur.com/fxRJhzx

**TestBox2** · 04-01-2015, 14:45

Use flashing with Rebuil EFS !

kusakhan · 04-01-2015, 16:42

20.34.40 : --------------- Read device information -----------------------
20.34.43 : Model: SCAQWAZM
20.34.43 : IMEI: 990003-22-964703-0
20.34.43 : Version ID: USCC_EuFi891V1.0.0B04
20.34.43 : Software ID: USCC_EUFI891V1.0.0B04
20.34.43 : Router WiFi Password: admin
20.34.43 : Firmware ID: USCC_EUFI891V1.0.0B04
20.34.43 : Build: OCT 25 201217:07:43AUG 10 201203:00:00
20.34.43 : --------------- Flash-mode operations ------------------------
20.35.32 : Upload APP Loader... OK
20.35.42 : Init.Flash: HYNIX_HY27SF081G2AD
20.35.44 : Write Part0...[PARTITION] . Ok
20.35.47 : Write Part1...[DBL] Ok
20.35.55 : Write Part2...[FSBL] Ok
20.36.01 : Write Part3...[OSBL] Ok
20.36.09 : Write Part4...[AMSS] Ok
20.36.22 : Write Part5...[DSP1] Ok
20.36.36 : Write Part6...[DSP2] Ok
20.38.59 : Write Part7...[CEFS] Ok
20.39.06 : Write Part8...[CEFS_APPS] Ok
20.40.16 : Write Part9...[NVM_AREA] Ok
20.40.29 : SelfTest ... Filed
20.41.10 : - Flashing Completed!
20.41.13 : --------------------------- E N D. --------------------------------

kusakhan · 04-01-2015, 16:43

20.42.13 : --------------- Read device information -----------------------
20.42.14 : Model: SCAQWAZM
20.42.14 : IMEI: 990003-22-964703-0
20.42.14 : Version ID: USCC_EuFi891V1.0.0B04
20.42.14 : Software ID: USCC_EUFI891V1.0.0B04
20.42.14 : Router WiFi Password: admin
20.42.14 : Firmware ID: USCC_EUFI891V1.0.0B04
20.42.14 : Build: OCT 25 201217:07:43AUG 10 201203:00:00
20.42.14 : --------------- Begin analyse firmware ------------------------
20.42.27 : Lock Found: OK
20.42.27 : Unlocking device... OK
20.42.30 : Operation completed...OK
20.42.31 : --------------------------- E N D. --------------------------------

**TestBox2** · 04-01-2015, 17:21

Now i glad to seen ur success !

Ur modem now fully repaired and unlocked .

Good luck!

kusakhan · 04-16-2015, 08:22

Anyone tell how to add apn setting in us cellular firmware....

03-04-2015, 07:26	#1 (permalink)
kusakhan1 Junior Member Join Date: Feb 2015 Location: Pakistan Posts: 5 Member: 2353952 Status: Offline Thanks Meter: 0	[Answered] ZTE EuFi891 How to show port mode this model ZTE EuFi891 Last edited by TestBox2; 03-04-2015 at 19:43.

03-15-2015, 18:36	#3 (permalink)
TestBox2 Product Manager Join Date: May 2008 Location: Ukraine Age: 45 Posts: 3,234 Member: 772096 Status: Offline Sonork: 100.69222 Thanks Meter: 8,277	HI, i need testing FW Flashing for ZTE 891L , n soon u can download file from support and try write to modem. Note! All UNDER TEST !! FW Create W/O modem testion in hands! Com-port open methodics same as 890L, but try press bidden button W/O connection to usb, and after 30 se**** connect to USB for install COM-Port drivers.

03-16-2015, 14:36	#4 (permalink)
kromoxs Insane Poster Join Date: Nov 2009 Posts: 73 Member: 1172961 Status: Offline Sonork: 333 Thanks Meter: 4	already on youtube,here https://www.youtube.com/watch?v=U43OmdPYFXE

03-17-2015, 15:54	#5 (permalink)
TestBox2 Product Manager Join Date: May 2008 Location: Ukraine Age: 45 Posts: 3,234 Member: 772096 Status: Offline Sonork: 100.69222 Thanks Meter: 8,277	Hi All anybody plz test 891 - Flashing , file already on support.

04-01-2015, 09:28	#9 (permalink)
kusakhan Freak Poster Join Date: Oct 2008 Posts: 208 Member: 879967 Status: Offline Thanks Meter: 33	13.22.18 : --------------- Read device information ----------------------- 13.22.20 : Model: SCAQWAZM 13.22.20 : IMEI: 990003-22-964703-0 13.22.20 : Version ID: BD_PTCL_EuFi891V1.0.0B04 13.22.20 : Software ID: BD_PTCL_EUFI891V1.0.1B01 13.22.21 : Router WiFi Password: admin 13.22.21 : Firmware ID: BD_PTCL_EUFI891V1.0.0B04 13.22.21 : Build: NOV 7 201417:20:17MAY 18 201200:00:00 13.22.21 : --------------- Flash-mode operations ------------------------ 13.22.55 : Upload APP Loader... OK 13.23.05 : Init.Flash: HYNIX_HY27SF081G2AD 13.23.07 : Write Part0...[PARTITION] . Ok 13.23.11 : Write Part1...[DBL] Ok 13.23.18 : Write Part2...[FSBL] Ok 13.23.24 : Write Part3...[OSBL] Ok 13.23.32 : Write Part4...[AMSS] Ok 13.23.45 : Write Part5...[DSP1] Ok 13.23.59 : Write Part6...[DSP2] Ok 13.26.52 : SelfTest ... Filed 13.27.33 : - Flashing Completed! 13.27.35 : --------------------------- E N D. --------------------------------

04-01-2015, 09:56	#10 (permalink)
kusakhan Freak Poster Join Date: Oct 2008 Posts: 208 Member: 879967 Status: Offline Thanks Meter: 33	After flash Not open web interface only open this page http://uscc.hotspot/company_use.asp http://imgur.com/fxRJhzx

04-01-2015, 14:45	#11 (permalink)
TestBox2 Product Manager Join Date: May 2008 Location: Ukraine Age: 45 Posts: 3,234 Member: 772096 Status: Offline Sonork: 100.69222 Thanks Meter: 8,277	Use flashing with Rebuil EFS !

04-01-2015, 16:42	#12 (permalink)
kusakhan Freak Poster Join Date: Oct 2008 Posts: 208 Member: 879967 Status: Offline Thanks Meter: 33	20.34.40 : --------------- Read device information ----------------------- 20.34.43 : Model: SCAQWAZM 20.34.43 : IMEI: 990003-22-964703-0 20.34.43 : Version ID: USCC_EuFi891V1.0.0B04 20.34.43 : Software ID: USCC_EUFI891V1.0.0B04 20.34.43 : Router WiFi Password: admin 20.34.43 : Firmware ID: USCC_EUFI891V1.0.0B04 20.34.43 : Build: OCT 25 201217:07:43AUG 10 201203:00:00 20.34.43 : --------------- Flash-mode operations ------------------------ 20.35.32 : Upload APP Loader... OK 20.35.42 : Init.Flash: HYNIX_HY27SF081G2AD 20.35.44 : Write Part0...[PARTITION] . Ok 20.35.47 : Write Part1...[DBL] Ok 20.35.55 : Write Part2...[FSBL] Ok 20.36.01 : Write Part3...[OSBL] Ok 20.36.09 : Write Part4...[AMSS] Ok 20.36.22 : Write Part5...[DSP1] Ok 20.36.36 : Write Part6...[DSP2] Ok 20.38.59 : Write Part7...[CEFS] Ok 20.39.06 : Write Part8...[CEFS_APPS] Ok 20.40.16 : Write Part9...[NVM_AREA] Ok 20.40.29 : SelfTest ... Filed 20.41.10 : - Flashing Completed! 20.41.13 : --------------------------- E N D. --------------------------------

04-01-2015, 16:43	#13 (permalink)
kusakhan Freak Poster Join Date: Oct 2008 Posts: 208 Member: 879967 Status: Offline Thanks Meter: 33	20.42.13 : --------------- Read device information ----------------------- 20.42.14 : Model: SCAQWAZM 20.42.14 : IMEI: 990003-22-964703-0 20.42.14 : Version ID: USCC_EuFi891V1.0.0B04 20.42.14 : Software ID: USCC_EUFI891V1.0.0B04 20.42.14 : Router WiFi Password: admin 20.42.14 : Firmware ID: USCC_EUFI891V1.0.0B04 20.42.14 : Build: OCT 25 201217:07:43AUG 10 201203:00:00 20.42.14 : --------------- Begin analyse firmware ------------------------ 20.42.27 : Lock Found: OK 20.42.27 : Unlocking device... OK 20.42.30 : Operation completed...OK 20.42.31 : --------------------------- E N D. --------------------------------

04-01-2015, 17:21	#14 (permalink)
TestBox2 Product Manager Join Date: May 2008 Location: Ukraine Age: 45 Posts: 3,234 Member: 772096 Status: Offline Sonork: 100.69222 Thanks Meter: 8,277	Now i glad to seen ur success ! Ur modem now fully repaired and unlocked . Good luck!

04-16-2015, 08:22	#15 (permalink)
kusakhan Freak Poster Join Date: Oct 2008 Posts: 208 Member: 879967 Status: Offline Thanks Meter: 33	Anyone tell how to add apn setting in us cellular firmware....