Sk17 flash mode - GSM-Forum

roclap · 10-24-2012, 07:16

Hi, my problem is I've updated by OTA having the bootloader unlock then i got a brick, (green led black screen) so I click on repair TA, and now the phone start but i cant get into flash mode or fastboot, and i cant do anything, and i have no network signal.
What should i do?

Octopus box · 10-24-2012, 07:25

Hello.
Try to re-flash the phone with the firmware from the Support Area.

To write firmware please perform the following steps:
1. Fully charge phone's battery.
2. Install necessary drivers (drivers are located in "Drivers" folder).
3. Select firmware file.
4. Click "Write firmware" button.
5. Reconnect battery.
6. Press "Back" button and connect phone with Micro USB cable directly to motherboard USB port (don't use USB hubs!).
7. Follow software instructions (promts).

roclap · 10-25-2012, 00:52

I dont have a Smart Card and I cant enter in flash mode.

Octopus box · 10-25-2012, 07:07

You need to have (buy) smart card - Octopus Software will not run without the smart card.

roclap · 10-25-2012, 07:33

Octopus Suit run without the smart card, in fact i had repair IMEI.
It seems that Repair TA had damage the TA

Octopus box · 10-25-2012, 08:21

To use Octopus Suite You need to buy Octopus Server Credits: Octopus Server Credits.

10-24-2012, 07:16	#1 (permalink)
roclap Junior Member Join Date: Oct 2012 Posts: 4 Member: 1829254 Status: Offline Thanks Meter: 0	Sk17 flash mode Hi, my problem is I've updated by OTA having the bootloader unlock then i got a brick, (green led black screen) so I click on repair TA, and now the phone start but i cant get into flash mode or fastboot, and i cant do anything, and i have no network signal. What should i do?

10-24-2012, 07:25	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,850 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Hello. Try to re-flash the phone with the firmware from the Support Area. To write firmware please perform the following steps: 1. Fully charge phone's battery. 2. Install necessary drivers (drivers are located in "Drivers" folder). 3. Select firmware file. 4. Click "Write firmware" button. 5. Reconnect battery. 6. Press "Back" button and connect phone with Micro USB cable directly to motherboard USB port (don't use USB hubs!). 7. Follow software instructions (promts).

10-25-2012, 00:52	#3 (permalink)
roclap Junior Member Join Date: Oct 2012 Posts: 4 Member: 1829254 Status: Offline Thanks Meter: 0	I dont have a Smart Card and I cant enter in flash mode.

10-25-2012, 07:07	#4 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,850 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	You need to have (buy) smart card - Octopus Software will not run without the smart card.

10-25-2012, 07:33	#5 (permalink)
roclap Junior Member Join Date: Oct 2012 Posts: 4 Member: 1829254 Status: Offline Thanks Meter: 0	Octopus Suit run without the smart card, in fact i had repair IMEI. It seems that Repair TA had damage the TA

10-25-2012, 08:21	#6 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,850 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	To use Octopus Suite You need to buy Octopus Server Credits: Octopus Server Credits.