ST18 Dead pls help - GSM-Forum

yaro_rguez · 10-22-2012, 23:18

hi octopus team i just wanna take off patter lock to phone i did how the told me on sfoft with tst pòint but the patter lock was still on phone then i turn off the phone and when i turn on again phone only vibration but dont turn on i thnik phone are in one stage due to tespoint because only het conect throuth the test point pls can u help me to get back alive this phone as i said before only get conection with pc throug the test point also i wanna know with is the rithg driver cause i have try many and with some of then i get conection other dont i already donwload firmware form the support but only give error this the list of driver that i get when is conected to pc pls tell me wich one is the right to be eable to flash it
QcomDevice90080
QualcommHS-USB qdlOADER 9008
ZEUS Flash Device
SEMC Flash Device

here is the log
Welcome to Octopus Suite version 1.1.1
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: ST18i
Octopus smart card is present.
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: ST18i
Please, reconnect battery, attach testpoint and connect USB cable...OK
Sending preloader...OK
Please, disconnect testpoint.
Waiting for preloader...OK
Reading info...
Sending loader...OK
Reading info...OK
IMEI: 359590-04-703190-8
Resetting Pattern Lock...OK
Resetting Pattern Lock successfully completed
--------------------------------------------------------------------------------

Platform: SE Qualcomm
Selected model: ST18i
Please, reconnect battery, attach testpoint and connect USB cable...OK
Sending preloader...OK
Please, disconnect testpoint.
Waiting for preloader...OK
Reading info...
Sending loader...OK
Reading info...OK
IMEI: 359590-04-703190-8
Reading full flash...Failed!
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: ST18i
Please, reconnect battery, hold "Vol-" key and connect USB cable...Canceled.
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: ST18i
Please, reconnect battery, hold "Vol-" key and connect USB cable...Canceled.
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: ST18i
Octopus smart card is present.
Please, reconnect battery, hold "Vol-" key and connect USB cable...OK
Reading info...
Chipset: Unknown
IMEI: 359590-04-703190-8
MSN:
Sending loader...Failed!
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: ST18i
Opening "ST18i_4.0.1.A.0.283_Urushi_BAL_WORLD.oct"...O K
Please, reconnect battery, hold "Vol-" key and connect USB cable...OK
Reading info...
Chipset: Unknown
IMEI: 359590-04-703190-8
MSN:
Sending loader...Failed!
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: ST18i
Opening "ST18i_4.0.1.A.0.283_Urushi_BAL_WORLD.oct"...O K
Please, reconnect battery, hold "Vol-" key and connect USB cable...OK
Reading info...
Chipset: Unknown
IMEI: 359590-04-703190-8
MSN:
Sending loader...Failed!
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: ST18i
Opening "ST18i_4.0.1.A.0.283_Urushi_BAL_WORLD.oct"...O K
Please, reconnect battery, hold "Vol-" key and connect USB cable...OK
Reading info...
Chipset: Unknown
IMEI: 359590-04-703190-8
MSN:
Sending loader...Failed!
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: ST18i
Opening "ST18i_4.0.1.A.0.283_Urushi_BAL_WORLD.oct"...O K
Please, reconnect battery, hold "Vol-" key and connect USB cable...OK
Reading info...
Chipset: Unknown
IMEI: 359590-04-703190-8
MSN:
Sending loader...Failed!

pls help with thi phone

yaro_rguez · 10-23-2012, 00:20

ok problem solved with medusa box thansk to *** i got medusa any way i flashed the phone and now phone get back to live but imei is 0000000000000 and when i try to repair with octopus suite they get me to a server with i dont had register anyway my question is do i need to have credits to reapir this imei or only do i need to register thans in advance her is the log

Welcome to Octopus Suite version 1.1.1
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: ST18i
Octopus smart card is present.
Please, reconnect battery, hold "Vol-" key and connect USB cable...Canceled.
--------------------------------------------------------------------------------
Connecting to server...OK
Username:
Authorizing...Failed!
Login error: Wrong username!

Octopus box · 10-23-2012, 05:58

Hello.
Yes, You need to buy Octopus Sever Credits. Please look here: Octopus Server Credits. Also You can contact us to Sonork or to Yahoo! Messenger for more details.

10-22-2012, 23:18	#1 (permalink)
yaro_rguez No Life Poster Join Date: Dec 2009 Location: CIEGO DE AVILA ,CUBA Posts: 639 Member: 1176958 Status: Offline Thanks Meter: 158	ST18 Dead pls help hi octopus team i just wanna take off patter lock to phone i did how the told me on sfoft with tst pòint but the patter lock was still on phone then i turn off the phone and when i turn on again phone only vibration but dont turn on i thnik phone are in one stage due to tespoint because only het conect throuth the test point pls can u help me to get back alive this phone as i said before only get conection with pc throug the test point also i wanna know with is the rithg driver cause i have try many and with some of then i get conection other dont i already donwload firmware form the support but only give error this the list of driver that i get when is conected to pc pls tell me wich one is the right to be eable to flash it QcomDevice90080 QualcommHS-USB qdlOADER 9008 ZEUS Flash Device SEMC Flash Device here is the log Welcome to Octopus Suite version 1.1.1 -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: ST18i Octopus smart card is present. -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: ST18i Please, reconnect battery, attach testpoint and connect USB cable...OK Sending preloader...OK Please, disconnect testpoint. Waiting for preloader...OK Reading info... Sending loader...OK Reading info...OK IMEI: 359590-04-703190-8 Resetting Pattern Lock...OK Resetting Pattern Lock successfully completed -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: ST18i Please, reconnect battery, attach testpoint and connect USB cable...OK Sending preloader...OK Please, disconnect testpoint. Waiting for preloader...OK Reading info... Sending loader...OK Reading info...OK IMEI: 359590-04-703190-8 Reading full flash...Failed! -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: ST18i Please, reconnect battery, hold "Vol-" key and connect USB cable...Canceled. -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: ST18i Please, reconnect battery, hold "Vol-" key and connect USB cable...Canceled. -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: ST18i Octopus smart card is present. Please, reconnect battery, hold "Vol-" key and connect USB cable...OK Reading info... Chipset: Unknown IMEI: 359590-04-703190-8 MSN: Sending loader...Failed! -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: ST18i Opening "ST18i_4.0.1.A.0.283_Urushi_BAL_WORLD.oct"...O K Please, reconnect battery, hold "Vol-" key and connect USB cable...OK Reading info... Chipset: Unknown IMEI: 359590-04-703190-8 MSN: Sending loader...Failed! -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: ST18i Opening "ST18i_4.0.1.A.0.283_Urushi_BAL_WORLD.oct"...O K Please, reconnect battery, hold "Vol-" key and connect USB cable...OK Reading info... Chipset: Unknown IMEI: 359590-04-703190-8 MSN: Sending loader...Failed! -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: ST18i Opening "ST18i_4.0.1.A.0.283_Urushi_BAL_WORLD.oct"...O K Please, reconnect battery, hold "Vol-" key and connect USB cable...OK Reading info... Chipset: Unknown IMEI: 359590-04-703190-8 MSN: Sending loader...Failed! -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: ST18i Opening "ST18i_4.0.1.A.0.283_Urushi_BAL_WORLD.oct"...O K Please, reconnect battery, hold "Vol-" key and connect USB cable...OK Reading info... Chipset: Unknown IMEI: 359590-04-703190-8 MSN: Sending loader...Failed! pls help with thi phone

10-23-2012, 00:20	#2 (permalink)
yaro_rguez No Life Poster Join Date: Dec 2009 Location: CIEGO DE AVILA ,CUBA Posts: 639 Member: 1176958 Status: Offline Thanks Meter: 158	ok problem solved with medusa box thansk to *** i got medusa any way i flashed the phone and now phone get back to live but imei is 0000000000000 and when i try to repair with octopus suite they get me to a server with i dont had register anyway my question is do i need to have credits to reapir this imei or only do i need to register thans in advance her is the log Welcome to Octopus Suite version 1.1.1 -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: ST18i Octopus smart card is present. Please, reconnect battery, hold "Vol-" key and connect USB cable...Canceled. -------------------------------------------------------------------------------- Connecting to server...OK Username: Authorizing...Failed! Login error: Wrong username!

10-23-2012, 05:58	#3 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,850 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Hello. Yes, You need to buy Octopus Sever Credits. Please look here: Octopus Server Credits. Also You can contact us to Sonork or to Yahoo! Messenger for more details.