alcatel 297a

[kammy6000]

how to connect this model to pc not detected even with
serial connection how to unlock

also no provider id?

[boucettay]

Originally Posted by kammy6000

how to connect this model to pc not detected even with
serial connection how to unlock

also no provider id?

pinout should be the same as OT217 :

http://gb-key.com/updates/pinouts/Alcatel%20Ot-217.png

test and report

Br

[kammy6000]

thankyou for your input

so basically i need to splice a comport cable connect to these
connections and apply battery power then proceed is that right
i am not a junior but never had to do this method

can you explain a little more thankyou friend

[boucettay]

if you did try connect phone with RJ45 cable + ftdi using connector of phone and phone not detected, so YES, you will need solder 3 points to phone, rx, tx, Gnd and place battery

Br

[kammy6000]

ok tried this not work at test point in picture

tried top 3 testpoint aswell no work

i have 10 testpoints in picture there is 15

tried mtk generic and alcatel 297 no response

tried vygis,setool, comport is detected but not phone checked pinouts
for both box still no luck

[kammy6000]

the tx lights flashes

rx light flash when power on phone but phone not detected

[boucettay]

Originally Posted by kammy6000

the tx lights flashes

rx light flash when power on phone but phone not detected

did you try invers RX, TX ?

Generic MTK will not work sure, as Alcatel is not Generic, but have own connection, protocol, Authentication etc etc

Br

[kammy6000]

hi yes i tried inverse still not detected

there are 10 testpoint

* 1*2 3*4 * = gnd *5
* 6 *7 = rx 8*= tx 9* 10 *

thanks

[boucettay]

Originally Posted by kammy6000

hi yes i tried inverse still not detected

there are 10 testpoint

* 1*2 3*4 * = gnd *5
* 6 *7 = rx 8*= tx 9* 10 *

thanks

have been doing some Search en Google, and seems people did do use Cable LG Gw300 and did unlock of this phone

so seems no need solder rx / tx / Gnd, and seems you did not test Rj45 cables that you have before opte for Soldering solution

and bout pinout, supposed to be 7 - 8 - 9 ( I think )
Br

[kammy6000]

thanks, but where you see that report? i tried it already not working

alcatel>mtk>ot-297>vygiss port23> time error

GBKey 1.69
Detecting serial port...
Detected : USB Serial Port by Vygisoft (COM25)
Press POWER button until LCD is ON ...
Timeout !!! (error:9004)


this is with gw 300 comport uart cable

br

[kammy6000]

ok sir thanks all your help here is solution

Alcatel OT-296 296A-2CTGMX1

choose this model ans calculate codes it will work ok

this for xf71nago SOR

BEST REGARDS GB KEY YOU DONE IT AGAIN