4044O & 4044N Unlocked

[JetOneTV]

I've been trying to unlock these 2 devices for like the last 5 hours or so...

I've got it done however I just thought I'd share this log...

After reconnecting reinstalling driver etc... it would unlock using the BOOTLOADER (not DIAG) however you do need DIAG before BOOTLOADER... not sure if I'm saying this correctly... also this log would have been longer because I was also using a 2nd computer (the computer that did the unlock was Windows 10 64bit (the other computer is Windows 7.)

Whatever it is, this phone is a pain to unlock them... at least for me.

SigmaKey v.2.30.03
847887297 Sigma dongle 2.30, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
--------- 2019-04-06 19:43:55 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
Qualcomm HS-USB QDLoader 9008 (COM78), Provider: Network Connect, Driver ver.: 3.0.0.0, Date: 2/4/2018, USB\VID_05C6&PID_9008&REV_0000
Phone model: OT-4044N
Missing response from phone
--------- 2019-04-06 19:44:36 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
ALCATEL HS-USB Diagnostics 9091 (COM1711), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/7/2014, USB\VID_1BBB&PID_9091&REV_0310&MI_00
Phone model: OT-4044N
Connecting.....Error opening serial port
--------- 2019-04-06 19:45:20 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
Phone model: OT-4044N
Baseband Processor: 8909
Detecting flash...eMMC, Flash size: 3.53 Gb
Hardware IMEI:
Reading security block...X8C0LS01BR20
Security area saved to "C:\Users\Unlocker\Documents\SigmaKey\security backup\0847887297\_8909_eMMC_X8C0LS01BR20.skb"
Removing firmware protection....OK
Unlocking phone....Done
--------- 2019-04-06 19:48:33 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
ALCATEL HS-USB Diagnostics 9091 (COM1709), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/7/2014, USB\VID_1BBB&PID_9091&REV_0310&MI_00
Phone model: OT-4044N
Connecting.......Error writing to serial port
--------- 2019-04-06 19:49:14 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
ALCATEL HS-USB QDLoader 9008 (COM78), Provider: ALCATEL Incorporated, Driver ver.: 2.0.8.8, Date: 9/25/2011, USB\VID_05C6&PID_9008&REV_0000
Phone model: OT-4044O
Missing response from phone
--------- 2019-04-06 19:49:37 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
ALCATEL HS-USB QDLoader 9008 (COM78), Provider: ALCATEL Incorporated, Driver ver.: 2.0.8.8, Date: 9/25/2011, USB\VID_05C6&PID_9008&REV_0000
Phone model: OT-4044O
Missing response from phone
--------- 2019-04-06 19:50:02 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
ALCATEL HS-USB QDLoader 9008 (COM78), Provider: ALCATEL Incorporated, Driver ver.: 2.0.8.8, Date: 9/25/2011, USB\VID_05C6&PID_9008&REV_0000
Phone model: OT-4044O
Missing response from phone
--------- 2019-04-06 19:50:40 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
ALCATEL HS-USB Diagnostics 9091 (COM1709), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/7/2014, USB\VID_1BBB&PID_9091&REV_0310&MI_00
Phone model: OT-4044O
Connecting.....Error opening serial port
--------- 2019-04-06 19:51:46 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
ALCATEL HS-USB QDLoader 9008 (COM78), Provider: ALCATEL Incorporated, Driver ver.: 2.0.8.8, Date: 9/25/2011, USB\VID_05C6&PID_9008&REV_0000
Phone model: OT-4044O
Missing response from phone
--------- 2019-04-06 19:52:07 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
ALCATEL HS-USB QDLoader 9008 (COM78), Provider: ALCATEL Incorporated, Driver ver.: 2.0.8.8, Date: 9/25/2011, USB\VID_05C6&PID_9008&REV_0000
Phone model: OT-4044O
Missing response from phone
--------- 2019-04-06 19:52:46 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
Phone model: OT-4044O
Connecting...Phone not found
--------- 2019-04-06 19:53:45 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
ALCATEL HS-USB Diagnostics 9091 (COM1709), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/7/2014, USB\VID_1BBB&PID_9091&REV_0310&MI_00
Phone model: OT-4044O
Connecting.....Error opening serial port
--------- 2019-04-06 19:54:33 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
Phone model: OT-4044O
Connecting....Error opening serial port
--------- 2019-04-06 19:54:54 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
ALCATEL HS-USB QDLoader 9008 (COM78), Provider: ALCATEL Incorporated, Driver ver.: 2.0.8.8, Date: 9/25/2011, USB\VID_05C6&PID_9008&REV_0000
Phone model: OT-4044N
Missing response from phone
--------- 2019-04-06 19:55:14 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
ALCATEL HS-USB QDLoader 9008 (COM78), Provider: ALCATEL Incorporated, Driver ver.: 2.0.8.8, Date: 9/25/2011, USB\VID_05C6&PID_9008&REV_0000
Phone model: OT-4044N
Missing response from phone
--------- 2019-04-06 19:56:10 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
Phone model: OT-4044N
Sending boot...Please perform the following actions with your phone:
- Unplug the USB cable and remove the battery
- Wait 10 seconds
- Insert the battery back, plug the USB cable
- Turn on the phone and wait until Windows detect it
- Press [OK]
--------- 2019-04-06 19:56:51 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
Phone model: OT-4044N
Connecting...Phone not found
--------- 2019-04-06 19:58:40 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
ALCATEL HS-USB Diagnostics 9091 (COM1709), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/7/2014, USB\VID_1BBB&PID_9091&REV_0310&MI_00
Phone model: OT-4044N
Connecting.....Error opening serial port
--------- 2019-04-06 19:59:13 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
Phone model: OT-4044N
Connecting....Error opening serial port
--------- 2019-04-06 19:59:38 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
Android HS-USB QDLoader 9008 (COM78), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/7/2014, USB\VID_05C6&PID_9008&REV_0000
Phone model: OT-4044N
Missing response from phone
--------- 2019-04-06 19:59:59 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
Android HS-USB QDLoader 9008 (COM78), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/7/2014, USB\VID_05C6&PID_9008&REV_0000
Phone model: OT-4044N
Missing response from phone
--------- 2019-04-06 20:00:24 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
Phone model: OT-4044N
Sending boot...Please perform the following actions with your phone:
- Unplug the USB cable and remove the battery
- Wait 10 seconds
- Insert the battery back, plug the USB cable
- Turn on the phone and wait until Windows detect it
- Press [OK]
--------- 2019-04-06 20:00:43 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
Android HS-USB QDLoader 9008 (COM78), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/7/2014, USB\VID_05C6&PID_9008&REV_0000
Phone model: OT-4044N
Missing response from phone
--------- 2019-04-06 20:01:05 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
Android HS-USB QDLoader 9008 (COM78), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/7/2014, USB\VID_05C6&PID_9008&REV_0000
Phone model: OT-4044N
Missing response from phone
--------- 2019-04-06 20:02:13 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
Android HS-USB QDLoader 9008 (COM78), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/7/2014, USB\VID_05C6&PID_9008&REV_0000
Phone model: OT-4044N
Missing response from phone
--------- 2019-04-06 20:02:59 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
Phone model: OT-4044N
Connecting...Phone not found
--------- 2019-04-06 20:03:55 ---------
SigmaKey 2.30.03 Qcom: Direct unlock
ALCATEL HS-USB Diagnostics 9091 (COM1709), Provider: TCL, Driver ver.: 6.0.0.0, Date: 8/7/2014, USB\VID_1BBB&PID_9091&REV_0310&MI_00
Phone model: OT-4044O
Baseband Processor: 8909
Detecting flash...eMMC, Flash size: 3.53 Gb
Hardware IMEI:
Reading security block...XWB9UA30BR00
Security area saved to "C:\Users\Unlocker\Documents\SigmaKey\security backup\0847887297\_8909_eMMC_XWB9UA30BR00.skb"
Removing firmware protection....OK
Unlocking phone....Done