Huawei Mate 10 Pro bla-l29 hang on logo - GSM-Forum

dehmanigsm · 04-05-2019, 19:12

hello best Team,

i have problem with Huawei Mate 10 Pro sometimes hang on logo on recovry
and sometimes always Restart,

i tyr firmware, but stop 5 %
I tried a lot firmware
____________
info devices :
bla-l29 8.0.0.137(c432)
___________

now I have tried with Board firmware :
Resultat.

SigmaKey v.2.30.03
*****3 Sigma dongle 2.30, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
--------- 2019-04-05 18:57:44 ---------
SigmaKey 2.30.03 HiSi: Write firmware
HUAWEI USB COM 1.0 (COM41), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 8/10/2014, USB\VID_12D1&PID_3609&REV_0100
Repairing...BLA-AL00-BD 1.0.0.38.skf
Sending boot....Error B00720AA
--------- 2019-04-05 18:59:25 ---------
SigmaKey 2.30.03 HiSi: Write firmware
HUAWEI USB COM 1.0 (COM41), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 8/10/2014, USB\VID_12D1&PID_3609&REV_0100
Repairing...BLA-AL00-BD 1.0.0.38.skf
Sending boot....Error B00720AA

dehmanigsm · 04-06-2019, 18:07

؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟

dehmanigsm · 04-07-2019, 14:53

possible find this firmware : bla-l29 8.0.0.137(c432)

abumu3ed · 04-07-2019, 16:06

hi, sounds like hardware problem

awab228 · 04-07-2019, 16:20

Quote:

Originally Posted by dehmanigsm

hello best Team,

i have problem with Huawei Mate 10 Pro sometimes hang on logo on recovry
and sometimes always Restart,

i tyr firmware, but stop 5 %
I tried a lot firmware
____________
info devices :
bla-l29 8.0.0.137(c432)
___________

now I have tried with Board firmware :
Resultat.

SigmaKey v.2.30.03
*****3 Sigma dongle 2.30, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
--------- 2019-04-05 18:57:44 ---------
SigmaKey 2.30.03 HiSi: Write firmware
HUAWEI USB COM 1.0 (COM41), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 8/10/2014, USB\VID_12D1&PID_3609&REV_0100
Repairing...BLA-AL00-BD 1.0.0.38.skf
Sending boot....Error B00720AA
--------- 2019-04-05 18:59:25 ---------
SigmaKey 2.30.03 HiSi: Write firmware
HUAWEI USB COM 1.0 (COM41), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 8/10/2014, USB\VID_12D1&PID_3609&REV_0100
Repairing...BLA-AL00-BD 1.0.0.38.skf
Sending boot....Error B00720AA

i think the error is caused by this new firmware version , bla-l29 8.0.0.137(c432) , there is also a possibility that it might be the EMMC , did you try to flash the same version or higher via upgrade mode ?

Gsmserver · 06-18-2019, 11:29

We added option of manually Kirin bootloader selection before factory firmware flashing.

You may manually select another Kirin bootloader for factory firmware flashing from the Autodetect drop-down menu.

04-05-2019, 19:12	#1 (permalink)
dehmanigsm Freak Poster Join Date: Feb 2015 Posts: 222 Member: 2349228 Status: Offline Sonork: 34610 Thanks Meter: 19	Huawei Mate 10 Pro bla-l29 hang on logo hello best Team, i have problem with Huawei Mate 10 Pro sometimes hang on logo on recovry and sometimes always Restart, i tyr firmware, but stop 5 % I tried a lot firmware ____________ info devices : bla-l29 8.0.0.137(c432) ___________ now I have tried with Board firmware : Resultat. SigmaKey v.2.30.03 *****3 Sigma dongle 2.30, Initializing...OK Pack 1: Activated Pack 2: Activated Pack 3: Activated --------- 2019-04-05 18:57:44 --------- SigmaKey 2.30.03 HiSi: Write firmware HUAWEI USB COM 1.0 (COM41), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 8/10/2014, USB\VID_12D1&PID_3609&REV_0100 Repairing...BLA-AL00-BD 1.0.0.38.skf Sending boot....Error B00720AA --------- 2019-04-05 18:59:25 --------- SigmaKey 2.30.03 HiSi: Write firmware HUAWEI USB COM 1.0 (COM41), Provider: HUAWEI Incorporated, Driver ver.: 2.0.6.725, Date: 8/10/2014, USB\VID_12D1&PID_3609&REV_0100 Repairing...BLA-AL00-BD 1.0.0.38.skf Sending boot....Error B00720AA

04-06-2019, 18:07	#2 (permalink)
dehmanigsm Freak Poster Join Date: Feb 2015 Posts: 222 Member: 2349228 Status: Offline Sonork: 34610 Thanks Meter: 19	؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟

04-07-2019, 14:53	#3 (permalink)
dehmanigsm Freak Poster Join Date: Feb 2015 Posts: 222 Member: 2349228 Status: Offline Sonork: 34610 Thanks Meter: 19	possible find this firmware : bla-l29 8.0.0.137(c432)

04-07-2019, 16:06	#4 (permalink)
abumu3ed No Life Poster Join Date: Mar 2007 Location: TuNiSiA Posts: 1,093 Member: 462224 Status: Offline Sonork: 100.1586374 Thanks Meter: 103	hi, sounds like hardware problem

06-18-2019, 11:29	#6 (permalink)
Gsmserver Product Supporter Join Date: Feb 2003 Location: gsmserver Posts: 9,148 Member: 21077 Status: Offline Thanks Meter: 116,340	We added option of manually Kirin bootloader selection before factory firmware flashing. You may manually select another Kirin bootloader for factory firmware flashing from the Autodetect drop-down menu.