Unlock of the XT720 Korean edition

[CDMA_MONGOLIA]

hi bro thank fast reply
korean xt720 first unlock done and write euro firmware, phone still network locked
first write euro firmware and unlock done but network problem
how fix it? i need write euro firmware and simtool kit

[mcandre]

If I were in this situation, here are several ways I would go:
1. Hard reset
2. Manually select the network:
Settings -> More.. -> Mobile networks -> Network Operators -> Select Manually
3. Another flash file

[CDMA_MONGOLIA]

pls add read unlock code for motorola xt720 korea
korean xt720 first unlock done and write euro firmware, phone still network lock how fix it ?

[Faheem Anjum]

Originally Posted by CDMA_MONGOLIA

pls add read unlock code for motorola xt720 korea
korean xt720 first unlock done and write euro firmware, phone still network lock how fix it ?

do unlock once again you will get signal after unlock again i am tested :0

[GSM_Support]

Please provide us with such information:

1. Please post log file from the unlock operation
2. Don't forget that it is required to use latest Sigma Software version
3. In case if after unlock operation there is no signal, run Direct Unlock operation once again.
   If software begins to read dump file from the phone, wait until it'll be read and send to support[at]sigmakey.com along with the log file.

Best Regards
GSMServer team

[CDMA_MONGOLIA]

hi bro how fix 3G same firmware apn setting not have

[CDMA_MONGOLIA]

[79.11][50]_Service1FF_00.sbf xt720 motoroi this file not have apn setting

[CDMA_MONGOLIA]

Originally Posted by Faheem Anjum

do unlock once again you will get signal after unlock again i am tested :0

i'm unlock once again i will get signal after unlock again but phone have network but call failed -> network down pls fix
korean firmware not have 3g setting(apn not have)

[CDMA_MONGOLIA]

Originally Posted by GSM_Support

Please provide us with such information:

1. Please post log file from the unlock operation
2. Don't forget that it is required to use latest Sigma Software version
3. In case if after unlock operation there is no signal, run Direct Unlock operation once again.
   If software begins to read dump file from the phone, wait until it'll be read and send to support[at]sigmakey.com along with the log file.

Best Regards
GSMServer team

SigmaKey 1.31.05
935141386 Sigma dongle 1.33, Initializing...OK
--- 2013-12-09 03:03:43 ---
SigmaKey 1.31.05 TI: Direct unlock
Mot Composite ADB Interface
Version: Linux version 2.6.29-omap1 (w21679@zkr30mdb05) (gcc version 4.4.0 (GCC) ) #1 PREEMPT Tue May 18 20:59:43 KST 2010
Phone model: motorola XT720
Firmware: STSKT_N_79.11.39R
Date: Tue May 18 21:12:49 KST 2010
Type: 3gsmepu91a_u_91.07.56i
Software IMEI: 354636031914693
Serial number: 6c4400240000000004038f0407025016
Security area saved to "C:\Documents and Settings\Quants\My Documents\SigmaKey\security backup\motorola_XT720_354636031914693 (0).skb"
Unlocking phone...Done
Restarting phone...Done
--- 2013-12-09 03:08:29 ---
SigmaKey 1.31.05 TI: Direct unlock
* daemon not running. starting it now *
* daemon started successfully *
Mot Composite ADB Interface
Version: Linux version 2.6.29-omap1 (w21679@zkr30mdb05) (gcc version 4.4.0 (GCC) ) #1 PREEMPT Tue May 18 20:59:43 KST 2010
Phone model: motorola XT720
Firmware: STSKT_N_79.11.39R
Date: Tue May 18 21:12:49 KST 2010
Type: 3gsmepu91a_u_91.07.56i
Software IMEI: 354636031914693
Serial number: 6c4400240000000004038f0407025016
Reading security block...Done
Restarting phone...Done
--- 2013-12-09 03:23:25 ---
SigmaKey 1.31.05 TI: Direct unlock
Mot Composite ADB Interface
Version: Linux version 2.6.29-omap1 (a24124@zin22lnx05) (gcc version 4.4.0 (GCC) ) #1 PREEMPT Tue Jul 13 17:19:35 IST 2010
Phone model: motorola Milestone XT720
Firmware: STR_U2_01.1E.0
Date: Tue Jul 13 17:25:27 IST 2010
Type: 3GSMEPU91A_U_91.07.5BI
Software IMEI: 354636031914693
Serial number: 6c4400240000000004038f0407025016
Security area saved to "C:\Documents and Settings\Quants\My Documents\SigmaKey\security backup\motorola_Milestone XT720_354636031914693 (1).skb"
Unlocking phone...Done
Restarting phone...Done
--- 2013-12-09 03:25:22 ---
SigmaKey 1.31.05 TI: Direct unlock
* daemon not running. starting it now *
* daemon started successfully *
Mot Composite ADB Interface
Version: Linux version 2.6.29-omap1 (a24124@zin22lnx05) (gcc version 4.4.0 (GCC) ) #1 PREEMPT Tue Jul 13 17:19:35 IST 2010
Phone model: motorola Milestone XT720
Firmware: STR_U2_01.1E.0
Date: Tue Jul 13 17:25:27 IST 2010
Type: 3GSMEPU91A_U_91.07.5BI
Software IMEI: 354636031914693
Serial number: 6c4400240000000004038f0407025016
Reading security block...Done
Restarting phone...Done
--- 2013-12-09 03:28:27 ---
SigmaKey 1.31.05 TI: Direct unlock
* daemon not running. starting it now *
* daemon started successfully *
Mot Composite ADB Interface
Version: Linux version 2.6.29-omap1 (a24124@zin22lnx05) (gcc version 4.4.0 (GCC) ) #1 PREEMPT Tue Jul 13 17:19:35 IST 2010
Phone model: motorola Milestone XT720
Firmware: STR_U2_01.1E.0
Date: Tue Jul 13 17:25:27 IST 2010
Type: 3GSMEPU91A_U_91.07.5BI
Software IMEI: 354636031914693
Serial number: 6c4400240000000004038f0407025016
Reading security block...Done
Restarting phone...Done
--- 2013-12-09 03:41:47 ---
SigmaKey 1.31.05 TI: Direct unlock
* daemon not running. starting it now *
* daemon started successfully *
Mot Composite ADB Interface
Version: Linux version 2.6.29-omap1 (a24124@zin22lnx05) (gcc version 4.4.0 (GCC) ) #1 PREEMPT Tue Jul 13 17:19:35 IST 2010
Phone model: motorola Milestone XT720
Firmware: STR_U2_01.1E.0
Date: Tue Jul 13 17:25:27 IST 2010
Type: 3GSMEPU91A_U_91.07.5BI
Software IMEI: 354636031914693
Serial number: 6c4400240000000004038f0407025016
Reading security block...Done
Restarting phone...Done
Operation log saved to "C:\Program Files\GsmServer\SigmaKey\SigmaKey log 09-12-2013.txt"


but korean motorola uero firmwate not unlocked

[GSM_Support]

@ CDMA_MONGOLIA,

Log files posted here were deeply analyzed.
According to the provided information, Direct Unlock operation was completed successfully and phone was unlocked.

Here is a screenshot of the locked phone model:

In case if after Direct Unlock operation phone is not asking for unlock code, it means that the set was successfully unlocked.

More likely that current behavior of this XT720 smartphone appears due to nuances of the firmware.

Best Regards
GSMServer team

[mcandre]

CDMA_MONGOLIA, I've sent you the PM, check it

[CDMA_MONGOLIA]

Originally Posted by GSM_Support

@ CDMA_MONGOLIA,

Log files posted here were deeply analyzed.
According to the provided information, Direct Unlock operation was completed successfully and phone was unlocked.

Here is a screenshot of the locked phone model:

In case if after Direct Unlock operation phone is not asking for unlock code, it means that the set was successfully unlocked.

More likely that current behavior of this XT720 smartphone appears due to nuances of the firmware.

Best Regards
GSMServer team

phone unlocked but no network, can't search any network
may be add nvm repair and efs repair will fix it

[CDMA_MONGOLIA]

Originally Posted by mcandre

CDMA_MONGOLIA, I've sent you the PM, check it

thanks bro i test tomorrow and post here

[Ransiri]

13 days operation.....
I didn't have experience with sigma unlock this model. But i did with my own way.
First time unlock no signal. Turn on "Only 2G" option. It will be ok.... (tested)
And to get 3G may be you wanna get back korean ROM. But before you can try with Europe ROM. Both are no way to set APN. So no 3G without APN. But you can easily set APN with this app...

APN Manager

[vinura]

iam not getting the window to enter the unlock code :'( but still it not reading my sim card
can anyone help plzzzzzzz