ZTE F286 unlock? - GSM-Forum

edisonsuen · 11-20-2014, 06:21

When ZTE F286 will be supported for unlocking? thanks

mcandre · 11-20-2014, 08:39

Is it a Qualcomm phone? If yes, try to service it following this manual

edisonsuen · 11-24-2014, 01:54

there was no driver to pop up at all. it didnt show any connection with computer.

mcandre · 11-24-2014, 09:41

Try setting the usb connection of this phone to different modes (camera, charging etc).

zipzap_kill · 11-25-2014, 09:47

i used rj45 mjoto ex cable following log comes

SigmaKey v.2.06.04
871798397 Sigma dongle 2.06, Initializing...OK
Pack 1: Activated
Looking for S-Card... Not found (card readers searched: 1 of 3)
Please connect SigmaKey/Box
87*****397 Sigma dongle 2.06, Initializing...OK
--- 2014-11-25 18:11:26 ---
SigmaKey 2.06.04 MTK: Get unlock codes
Plug the USB cable into the powered off phone...
Cancelled
--- 2014-11-25 18:15:08 ---
SigmaKey 2.06.04 MTK: Direct unlock
USB Serial Port (COM7), Provider: FTDI, Driver ver.: 2.10.0.0, Date: 27/01/2014, FTDIBUS\COMPORT&VID_0403&PID_6001
Baud rate: 115200
Release "Power on" button!
Baseband Processor: MT6276, HW Rev. B.00, SW Rev. 1.01
Unsupported

GSM_Support · 11-25-2014, 10:15

@ zipzap_kill,

At the moment, current phone model, ZTE F286, is not supported for the servicing purposes by SigmaKey.
Please check complete list of all supported phone models by following this link.

Best Regards
GSMServer team

Abu kalam · 11-14-2015, 10:20

how to unlock zte f286?????????????????????????/

keeth_777 · 11-23-2015, 13:50

zte f286 unlock
1. select mtk tab in sigmakey
2. select model zte a261
3. enter imei number on the phone to imei box
4. press calculate unlock codes button
5. powwer on the phone without sim and enter * 983 * 8284 #
6. enter 12 digit code phone will auto off or restart
7. put new sim and its unlocked

thats all

an_khan143 · 12-03-2015, 16:08

keeth777 great buddy ur trik is working

ashath · 12-08-2015, 14:33

its ok big thank to u

azad4u · 12-16-2015, 12:19

THANKS keeth777 IT WORKS FOR ME

Gsmserver · 12-23-2015, 11:33

This model was added to Sigma MTK calculator, thanks for report.

adolphus1 · 12-23-2015, 11:44

Thanks bro your trick work very fine

Debashish_Tel · 12-26-2015, 13:24

its ok big thank 2 u

allprepaidau · 03-26-2016, 22:52

HI I have get code from calculator on optus zte F286
but I tried as below ,still not working!

zte f286 unlock
1. select mtk tab in sigmakey
2. select model zte a261
3. enter imei number on the phone to imei box
4. press calculate unlock codes button
5. powwer on the phone without sim and enter * 983 * 8284 #
6. enter 12 digit code phone will auto off or restart
7. put new sim and its unlocked

11-20-2014, 06:21	#1 (permalink)
edisonsuen Freak Poster Join Date: Mar 2008 Location: australia Posts: 389 Member: 721542 Status: Offline Thanks Meter: 56	ZTE F286 unlock? When ZTE F286 will be supported for unlocking? thanks

11-20-2014, 08:39	#2 (permalink)
mcandre No Life Poster Join Date: Mar 2006 Location: Central Europe Age: 39 Posts: 11,877 Member: 239548 Status: Offline Thanks Meter: 2,781	Is it a Qualcomm phone? If yes, try to service it following this manual

11-24-2014, 01:54	#3 (permalink)
edisonsuen Freak Poster Join Date: Mar 2008 Location: australia Posts: 389 Member: 721542 Status: Offline Thanks Meter: 56	there was no driver to pop up at all. it didnt show any connection with computer.

11-24-2014, 09:41	#4 (permalink)
mcandre No Life Poster Join Date: Mar 2006 Location: Central Europe Age: 39 Posts: 11,877 Member: 239548 Status: Offline Thanks Meter: 2,781	Try setting the usb connection of this phone to different modes (camera, charging etc).

11-25-2014, 09:47	#5 (permalink)
zipzap_kill No Life Poster Join Date: Apr 2005 Location: Darwin Northern Teretory Age: 40 Posts: 566 Member: 136173 Status: Offline Sonork: 108426:ind Thanks Meter: 97	i used rj45 mjoto ex cable following log comes SigmaKey v.2.06.04 871798397 Sigma dongle 2.06, Initializing...OK Pack 1: Activated Looking for S-Card... Not found (card readers searched: 1 of 3) Please connect SigmaKey/Box 87*****397 Sigma dongle 2.06, Initializing...OK --- 2014-11-25 18:11:26 --- SigmaKey 2.06.04 MTK: Get unlock codes Plug the USB cable into the powered off phone... Cancelled --- 2014-11-25 18:15:08 --- SigmaKey 2.06.04 MTK: Direct unlock USB Serial Port (COM7), Provider: FTDI, Driver ver.: 2.10.0.0, Date: 27/01/2014, FTDIBUS\COMPORT&VID_0403&PID_6001 Baud rate: 115200 Release "Power on" button! Baseband Processor: MT6276, HW Rev. B.00, SW Rev. 1.01 Unsupported

11-25-2014, 10:15	#6 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ zipzap_kill, At the moment, current phone model, ZTE F286, is not supported for the servicing purposes by SigmaKey. Please check complete list of all supported phone models by following this link. Best Regards GSMServer team

11-14-2015, 10:20	#7 (permalink)
Abu kalam Insane Poster Join Date: Sep 2014 Location: Middle Badda Posts: 60 Member: 2263925 Status: Offline Sonork: 100.1663471 Thanks Meter: 2	how to unlock zte f286?????????????????????????/

11-23-2015, 13:50	#8 (permalink)
keeth_777 Freak Poster Join Date: Sep 2007 Posts: 326 Member: 581888 Status: Offline Thanks Meter: 74	zte f286 unlock 1. select mtk tab in sigmakey 2. select model zte a261 3. enter imei number on the phone to imei box 4. press calculate unlock codes button 5. powwer on the phone without sim and enter * 983 * 8284 # 6. enter 12 digit code phone will auto off or restart 7. put new sim and its unlocked thats all

12-03-2015, 16:08	#9 (permalink)
an_khan143 Freak Poster Join Date: Jun 2010 Location: india Posts: 317 Member: 1323417 Status: Offline Sonork: 650150323 Thanks Meter: 61	keeth777 great buddy ur trik is working

12-08-2015, 14:33	#10 (permalink)
ashath Junior Member Join Date: Feb 2012 Location: colombo Posts: 14 Member: 1719331 Status: Offline Sonork: 781020257 Thanks Meter: 2	its ok big thank to u

12-16-2015, 12:19	#11 (permalink)
azad4u No Life Poster Join Date: Apr 2007 Location: DUBAI, UAE Posts: 545 Member: 497374 Status: Offline Sonork: 1587252:AZAD Thanks Meter: 93	THANKS keeth777 IT WORKS FOR ME

12-23-2015, 11:33	#12 (permalink)
Gsmserver Product Supporter Join Date: Feb 2003 Location: gsmserver Posts: 9,149 Member: 21077 Status: Offline Thanks Meter: 116,345	This model was added to Sigma MTK calculator, thanks for report.

12-23-2015, 11:44	#13 (permalink)
adolphus1 Junior Member Join Date: Sep 2013 Posts: 26 Member: 2018814 Status: Offline Thanks Meter: 0	Thanks bro your trick work very fine

12-26-2015, 13:24	#14 (permalink)
Debashish_Tel Junior Member Join Date: Nov 2013 Location: Bangladesh Posts: 3 Member: 2063721 Status: Offline Sonork: 100.1649031 Thanks Meter: 3	its ok big thank 2 u

03-26-2016, 22:52	#15 (permalink)
allprepaidau Junior Member Join Date: Oct 2015 Posts: 4 Member: 2469828 Status: Offline Thanks Meter: 0	HI I have get code from calculator on optus zte F286 but I tried as below ,still not working! zte f286 unlock 1. select mtk tab in sigmakey 2. select model zte a261 3. enter imei number on the phone to imei box 4. press calculate unlock codes button 5. powwer on the phone without sim and enter * 983 * 8284 # 6. enter 12 digit code phone will auto off or restart 7. put new sim and its unlocked