GSM-Forum - can i write file (6820/8810)

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Volcano Box (https://forum.gsmhosting.com/vbb/f723/)

- - can i write file (6820/8810) (https://forum.gsmhosting.com/vbb/f723/can-i-write-file-6820-8810-a-1732875/)

can i write file (6820/8810)

before format the phone ccit model-z6, i read file bin format with the phone
can i write this file in the phone or change the file to pac file?

you can not change bin to pac

first read info must need
then try write flash file
and please always post screenshot

here is the info my phone and error in write bin file in the phone

Code:

Volcano Updated: 2013-10-25

  Connecting...

  Connection successful,connected state!

  Version: V3.8

  SN:479-830-261

  Port:COM4

  After format or Flash you have to press & hold power button for at least 1.30 mins.

  Note for win7 users :

  Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.

  After that the spd drivers will have the ability to be loaded.

  Available Ports:COM1 COM4 

  Detection initiated...

  Vcc: null

  Gnd: 5

  Analyzing D+ and D-...

  D+ = 3, D- = 2

  Detection D+/D- with 6.49 seconds.

  Continue to detect BOOT pin...

  Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)

  UsbVcc(VCC) = 1 10, BOOT(Pull Down) = 4

  Setting...

  Find USB device:SCI USB2Serial (COM5), (VID_1782&PID_4D00)

  Pinouts setting complete!

    

    

  Internal version: SPRD3

  Boot downloaded.

  Start boot please wait a moment....

  Spreadtrum Boot Block version 1.1

  Boot downloaded.

  CPU TYPE:SC8810/6820 [88100001]

  Flash ID: 002C00BC90555600

  Flash Type:[Micron] MT29C4G48MAZAPAKD

  FLASH LEN:0x20000000

  mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjaluna),10m(modem),3840k(fixnv),3840k(backupfixnv),5120k(dsp),3840k(runtimenv),10m(boot),10m(recovery),227m(system),158m(userdata),60m(cache),256k(misc),1m(boot_logo),1m(fastboot_logo),3840k(productinfo),512k(kpanic),512k(simlock),5m(intmemory)

  Analysis flash internal data successfully.

  Detection initiated...

  Vcc: null

  Gnd: 5

  Analyzing D+ and D-...

  D+ = 3, D- = 2

  Detection D+/D- with 5.99 seconds.

  Continue to detect BOOT pin...

  Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)

  UsbVcc(VCC) = 1 10, BOOT(Pull Down) = 4

  Setting...

  Find USB device:SCI USB2Serial (COM5), (VID_1782&PID_4D00)

  Pinouts setting complete!

    

    

  Internal version: SPRD3

  Boot downloaded.

  Start boot please wait a moment....

  Spreadtrum Boot Block version 1.1

  Boot downloaded.

  Flash ID: 002C00BC90555600

  Flash Type:[Micron] MT29C4G48MAZAPAKD

  FLASH LEN:0x20000000

  Please read the phone partition.

>>Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.

Brother Post Screenshot
Select Boot 14 Then Read Info After Try Write Flash
If Same Flash With Pac File , Find On Google Or Read With Volcano To Factory Format Then Make Pac File

Br,
AzimBahar

my phone have hang when go to menu and my phone hang very very

after cft calibration with volcano was hang on logo

Boot downloaded.
CPU TYPE:SC8810/6820 [88100001]
Flash ID: 002C00BC90555600
Flash Type:[Micron] MT29C4G48MAZAPAKD
FLASH LEN:0x20000000
mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 227m(system),158m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic),512k(simlock),5m(intmemory)
>>Analysis flash internal data successfully.

spd 6820

model ccit z6
ples pac file

Quote:

Originally Posted by ..::One-Man::.. (Post 9841774)

Brother Post Screenshot
Select Boot 14 Then Read Info After Try Write Flash
If Same Flash With Pac File , Find On Google Or Read With Volcano To Factory Format Then Make Pac File

Br,
AzimBahar

http://s52.radikal.ru/i137/1403/a0/844880f0dca7.jpg

@ trt ...

Whats your phone status ....?
Why you post in old thread...?
Post a new Thread with details about the Phone ...!!

Br,
AniAXN;)