Post Here ALL Successful Repaired Phone By Volcano/Inferno [SUCCESS REPORTS BY USERS] - Page 197 - GSM-Forum

luckymobile jalandhar · 10-07-2012, 11:34

yxtel e300 repaired in 1 min

2012-10-07 3:54:38 PM >>Detection initiated, connect the phone and power on it...
2012-10-07 3:54:40 PM >>Vcc: 10
2012-10-07 3:54:40 PM >>Gnd: 1 4
2012-10-07 3:54:40 PM >>RX: 6, TX: 7
2012-10-07 3:54:40 PM >>
2012-10-07 3:54:40 PM >>
2012-10-07 3:54:41 PM >>Internal version: Spreadtrum Boot Block version 2.0
2012-10-07 3:54:41 PM >>Boot downloading...
2012-10-07 3:54:45 PM >>Start boot please wait a moment....
2012-10-07 3:54:47 PM >>BOOT Ver: Spreadtrum Boot Block version 1.2
2012-10-07 3:54:47 PM >>CPU TYPE:SC6600L [66007001]
2012-10-07 3:54:47 PM >>FLASH ID: 0001227E22202200
2012-10-07 3:54:47 PM >>Flash Type:[SPANSION] 71PL128NB0
2012-10-07 3:54:47 PM >>Size:0x1000000(16MB)
2012-10-07 3:54:47 PM >>Reading...(0)
2012-10-07 3:58:28 PM >>The data has been saved in D:\dragon flash\yxtel e300\_20121007_155812_FullFlash.bin, size: 16 M.
2012-10-07 3:58:41 PM >>Detection initiated, connect the phone and power on it...
2012-10-07 3:58:43 PM >>Vcc: 10
2012-10-07 3:58:43 PM >>Gnd: 1 4
2012-10-07 3:58:43 PM >>RX: 6, TX: 7
2012-10-07 3:58:43 PM >>
2012-10-07 3:58:44 PM >>Internal version: Spreadtrum Boot Block version 2.0
2012-10-07 3:58:44 PM >>Boot downloading...
2012-10-07 3:58:48 PM >>Start boot please wait a moment....
2012-10-07 3:58:50 PM >>BOOT Ver: Spreadtrum Boot Block version 1.2
2012-10-07 3:58:50 PM >>CPU TYPE:SC6600L [66007001]
2012-10-07 3:58:50 PM >>FLASH ID: 0001227E22202200
2012-10-07 3:58:50 PM >>Flash Type:[SPANSION] 71PL128NB0
2012-10-07 3:58:50 PM >>Size:0x1000000(16MB)
2012-10-07 3:58:50 PM >>The phone is setting back to Factory...

luckymobile jalandhar · 10-07-2012, 11:35

yxtel e300 repaired in 1 min

2012-10-07 3:54:38 PM >>Detection initiated, connect the phone and power on it...
2012-10-07 3:54:40 PM >>Vcc: 10
2012-10-07 3:54:40 PM >>Gnd: 1 4
2012-10-07 3:54:40 PM >>RX: 6, TX: 7
2012-10-07 3:54:40 PM >>
2012-10-07 3:54:40 PM >>
2012-10-07 3:54:41 PM >>Internal version: Spreadtrum Boot Block version 2.0
2012-10-07 3:54:41 PM >>Boot downloading...
2012-10-07 3:54:45 PM >>Start boot please wait a moment....
2012-10-07 3:54:47 PM >>BOOT Ver: Spreadtrum Boot Block version 1.2
2012-10-07 3:54:47 PM >>CPU TYPE:SC6600L [66007001]
2012-10-07 3:54:47 PM >>FLASH ID: 0001227E22202200
2012-10-07 3:54:47 PM >>Flash Type:[SPANSION] 71PL128NB0
2012-10-07 3:54:47 PM >>Size:0x1000000(16MB)
2012-10-07 3:54:47 PM >>Reading...(0)
2012-10-07 3:58:28 PM >>The data has been saved in D:\dragon flash\yxtel e300\_20121007_155812_FullFlash.bin, size: 16 M.
2012-10-07 3:58:41 PM >>Detection initiated, connect the phone and power on it...
2012-10-07 3:58:43 PM >>Vcc: 10
2012-10-07 3:58:43 PM >>Gnd: 1 4
2012-10-07 3:58:43 PM >>RX: 6, TX: 7
2012-10-07 3:58:43 PM >>
2012-10-07 3:58:44 PM >>Internal version: Spreadtrum Boot Block version 2.0
2012-10-07 3:58:44 PM >>Boot downloading...
2012-10-07 3:58:48 PM >>Start boot please wait a moment....
2012-10-07 3:58:50 PM >>BOOT Ver: Spreadtrum Boot Block version 1.2
2012-10-07 3:58:50 PM >>CPU TYPE:SC6600L [66007001]
2012-10-07 3:58:50 PM >>FLASH ID: 0001227E22202200
2012-10-07 3:58:50 PM >>Flash Type:[SPANSION] 71PL128NB0
2012-10-07 3:58:50 PM >>Size:0x1000000(16MB)
2012-10-07 3:58:50 PM >>The phone is setting back to Factory...

aliyousafzai · 10-08-2012, 10:44

china samsung l88 copy read info

aliyousafzai · 10-08-2012, 10:47

china samsung l88 copy read flash with volcano

aliyousafzai · 10-08-2012, 10:47

china samsung l88 copy read flash with volcano

warshock · 10-09-2012, 07:26

iphone 4 clone no power, done!

unit : iphone 4 clone
status : blink only when press power on
solution : format and repair imei via volcano box

tools
volcano box
P - 30a jig

procedure

1. connect volcanobox to pc and open GUI
2. connect unit with jig P - 30A to box
3. detect as mtk chips ( read flash kahit no power)

4. check format option then run

wait until finish

6. repair imei
6a. press control alt i ( Ctrl + Alt + i ) to show imei repair option
6b. check imei tools and run
6c. click start and wait to finish reading info
6d. put desired imei and click change imei

for reference only

Namangan · 10-09-2012, 10:39

Volcano Updated: 2012-09-28
Connecting...
Connection successful,connected state!
Version: V3.8
SN:081-120-218
Port:COM8
Available Ports:COM1 COM3 COM4 COM7 COM8
Detection initiated, connect the phone and power on it...
Vcc: 10 12
Gnd: 1 4
Analyzing Rx and Tx...
User stop
Pinouts are not fonud!
Available Ports:COM1 COM3 COM4 COM7 COM8
Detection initiated...
Vcc: 10
Gnd: 1 4
Analyzing D+ and D-...
User stop
Pinouts are not fonud!
Available Ports:COM1 COM3 COM4 COM7 COM8
Current Port:COM8
Detection initiated...
Vcc: 10
Gnd: 1 4
Analyzing D+ and D-...
Failed to detect.
Pinouts are not fonud!
Available Ports:COM1 COM3 COM4 COM8
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: 7 8
RX: 3, TX: 2

please press Power on/off button...
Flash ID : 00C84016
Flash Type: SF_GD25Q32
Flash Len :0x400000(4M)
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: 7 8
RX: 3, TX: 2

please press Power on/off button...
Flash ID : 00C84016
Flash Type: SF_GD25Q32
Flash Len :0x400000(4M)
Reading completed.
The data has been saved in F:\VOLC\flash\readed\COOLSAND\nokia Kool K160\nokia Kool K160.bin, size: 4 M.

52585
>>0000

Namangan · 10-09-2012, 10:41

Volcano Updated: 2012-09-28
Connecting...
Connection successful,connected state!
Version: V3.8
SN:081-120-218
Port:COM8
Available Ports:COM1 COM3 COM4 COM8
Current Port:COM8
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 0,94 seconds!
Analyzing USB device, please wait...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
Setting...
Set the Pinouts failed,please reconnect and try again!
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 0,94 seconds!
Analyzing USB device, please wait...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
Setting...
Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
Pinouts setting complete!
Connecting to phone...
Connection success!
Boot downloading...
Boot downloading finished.
Flash Type: SAMSUNG_K5L2833
Flash ID: 00EC240200000000
Flash Size: 01000000h
Read Size: 01000000h(16M)
CPU : 8533x_family_series
Flash Reading finished
Phone Lock or SIM Lock:
2440
2441
0000
2407
4630
3566
0000
2407
4630
7518
Anti-theft lock:
100000
screen lock:
014523678
210
>>The data has been saved in F:\VOLC\flash\readed\MSTAR\C3\C3-.bin, size: 16 M.

Brute-force · 10-10-2012, 09:19

intex in6660 succses fully read user code and read flash file

Brute-force · 10-10-2012, 09:20

intex in6660 succses fully read user code and read flash file

.::GEANECIV::. · 10-10-2012, 22:42

check imei iphone ok, its free
thx to team

cbcelular · 10-11-2012, 21:14

IPHONE S

thanks to our friend worked procedure

Thank jhun_amaze2012 friend....

Detection initiated...
Vcc: 1 2
Gnd: 15 16
Analyzing D+ and D-...
D+ = 4, D- = 6
Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM11), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:[68030000]
Flash ID: 00AD00A1
Flash Type:[Hyundai] HY27UF081G2A/M
FLASH LEN:0x8000000
Write 1 imei successfully.
IMEI has been written.

Qaisar Mahmood · 10-12-2012, 09:51

Read info

Read Flash

Read CNV

BR
Qaisar Mahmood

choudhary mobile · 10-12-2012, 09:58

yxtel c6 write flash ok volcano

JMJ ALBERT · 10-14-2012, 08:21

ZTK K3770 format ok

10-11-2012, 21:14	#12 (permalink)
cbcelular No Life Poster Join Date: Jan 2006 Location: ES-Brazil Posts: 1,224 Member: 217679 Status: Offline Thanks Meter: 95	Iphone s IPHONE S thanks to our friend worked procedure Thank jhun_amaze2012 friend.... Detection initiated... Vcc: 1 2 Gnd: 15 16 Analyzing D+ and D-... D+ = 4, D- = 6 Analyzing USB device, please wait... Find USB device:SCI USB2Serial (COM11), (VID_1782&PID_4D00) Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.1 Boot downloaded. CPU TYPE:[68030000] Flash ID: 00AD00A1 Flash Type:[Hyundai] HY27UF081G2A/M FLASH LEN:0x8000000 Write 1 imei successfully. IMEI has been written.

10-12-2012, 09:51	#13 (permalink)
Qaisar Mahmood No Life Poster Join Date: Jan 2006 Location: Pakistan Posts: 15,094 Member: 226457 Status: Offline Sonork: No more used Thanks Meter: 14,934	Samsung i9100 S2 MTK CPU Successfully Read Flash Read info Read Flash Read CNV BR Qaisar Mahmood

10-08-2012, 10:44	#3 (permalink)
aliyousafzai No Life Poster Join Date: Aug 2010 Location: kpk _PAK Posts: 1,928 Member: 1358184 Status: Offline Sonork: 100.1616912 Thanks Meter: 615	china samsung l88 copy read info

10-08-2012, 10:47	#4 (permalink)
aliyousafzai No Life Poster Join Date: Aug 2010 Location: kpk _PAK Posts: 1,928 Member: 1358184 Status: Offline Sonork: 100.1616912 Thanks Meter: 615	china samsung l88 copy read flash with volcano

10-08-2012, 10:47	#5 (permalink)
aliyousafzai No Life Poster Join Date: Aug 2010 Location: kpk _PAK Posts: 1,928 Member: 1358184 Status: Offline Sonork: 100.1616912 Thanks Meter: 615	china samsung l88 copy read flash with volcano

10-09-2012, 07:26	#6 (permalink)
warshock Freak Poster Join Date: Jan 2011 Location: Philippines Posts: 323 Member: 1494304 Status: Offline Sonork: 100.1606186 Thanks Meter: 108	iphone 4 clone no power, done! unit : iphone 4 clone status : blink only when press power on solution : format and repair imei via volcano box tools volcano box P - 30a jig procedure 1. connect volcanobox to pc and open GUI 2. connect unit with jig P - 30A to box 3. detect as mtk chips ( read flash kahit no power) 4. check format option then run wait until finish 6. repair imei 6a. press control alt i ( Ctrl + Alt + i ) to show imei repair option 6b. check imei tools and run 6c. click start and wait to finish reading info 6d. put desired imei and click change imei for reference only

10-09-2012, 10:39	#7 (permalink)
Namangan No Life Poster Join Date: Apr 2010 Location: Uzbekistan Age: 45 Posts: 4,418 Member: 1293050 Status: Offline Sonork: 100.1625975 Thanks Meter: 668	Volcano Updated: 2012-09-28 Connecting... Connection successful,connected state! Version: V3.8 SN:081-120-218 Port:COM8 Available Ports:COM1 COM3 COM4 COM7 COM8 Detection initiated, connect the phone and power on it... Vcc: 10 12 Gnd: 1 4 Analyzing Rx and Tx... User stop Pinouts are not fonud! Available Ports:COM1 COM3 COM4 COM7 COM8 Detection initiated... Vcc: 10 Gnd: 1 4 Analyzing D+ and D-... User stop Pinouts are not fonud! Available Ports:COM1 COM3 COM4 COM7 COM8 Current Port:COM8 Detection initiated... Vcc: 10 Gnd: 1 4 Analyzing D+ and D-... Failed to detect. Pinouts are not fonud! Available Ports:COM1 COM3 COM4 COM8 Detection initiated, connect the phone and power on it... Vcc: null Gnd: 7 8 RX: 3, TX: 2 please press Power on/off button... Flash ID : 00C84016 Flash Type: SF_GD25Q32 Flash Len :0x400000(4M) Detection initiated, connect the phone and power on it... Vcc: null Gnd: 7 8 RX: 3, TX: 2 please press Power on/off button... Flash ID : 00C84016 Flash Type: SF_GD25Q32 Flash Len :0x400000(4M) Reading completed. The data has been saved in F:\VOLC\flash\readed\COOLSAND\nokia Kool K160\nokia Kool K160.bin, size: 4 M. 52585 >>0000

10-09-2012, 10:41	#8 (permalink)
Namangan No Life Poster Join Date: Apr 2010 Location: Uzbekistan Age: 45 Posts: 4,418 Member: 1293050 Status: Offline Sonork: 100.1625975 Thanks Meter: 668	Volcano Updated: 2012-09-28 Connecting... Connection successful,connected state! Version: V3.8 SN:081-120-218 Port:COM8 Available Ports:COM1 COM3 COM4 COM8 Current Port:COM8 Detection initiated... Vcc: null Gnd: 5 Analyzing D+ and D-... D+ = 3, D- = 2 Detection D+/D- with 0,94 seconds! Analyzing USB device, please wait... Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300) Setting... Set the Pinouts failed,please reconnect and try again! Detection initiated... Vcc: null Gnd: 5 Analyzing D+ and D-... D+ = 3, D- = 2 Detection D+/D- with 0,94 seconds! Analyzing USB device, please wait... Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300) Setting... Find USB device:GCREADER USB Device, (VID_1B20&PID_0300) Pinouts setting complete! Connecting to phone... Connection success! Boot downloading... Boot downloading finished. Flash Type: SAMSUNG_K5L2833 Flash ID: 00EC240200000000 Flash Size: 01000000h Read Size: 01000000h(16M) CPU : 8533x_family_series Flash Reading finished Phone Lock or SIM Lock: 2440 2441 0000 2407 4630 3566 0000 2407 4630 7518 Anti-theft lock: 100000 screen lock: 014523678 210 >>The data has been saved in F:\VOLC\flash\readed\MSTAR\C3\C3-.bin, size: 16 M.

10-10-2012, 09:19	#9 (permalink)
Brute-force Freak Poster Join Date: Apr 2012 Location: only unlock punjab india Posts: 145 Member: 1745576 Status: Offline Thanks Meter: 12	intex in6660 succses fully read user code and read flash file

10-10-2012, 09:20	#10 (permalink)
Brute-force Freak Poster Join Date: Apr 2012 Location: only unlock punjab india Posts: 145 Member: 1745576 Status: Offline Thanks Meter: 12	intex in6660 succses fully read user code and read flash file

10-10-2012, 22:42	#11 (permalink)
.::GEANECIV::. Freak Poster Join Date: Sep 2008 Posts: 235 Member: 853097 Status: Offline Sonork: 100.1622287 Thanks Meter: 131	check imei iphone ok, its free thx to team

10-12-2012, 09:58	#14 (permalink)
choudhary mobile No Life Poster Join Date: Dec 2010 Location: india , up , ghaziabad Posts: 751 Member: 1475133 Status: Offline Sonork: 100.1619773 Thanks Meter: 407	yxtel c6 write flash ok volcano

10-14-2012, 08:21	#15 (permalink)
JMJ ALBERT Freak Poster Join Date: Dec 2006 Location: philippines Posts: 309 Member: 406299 Status: Offline Sonork: none Thanks Meter: 280	ZTK K3770 format ok