sc8810_read ok but canot write - GSM-Forum

MOBILE CONTROL · 09-28-2013, 14:54

hello i read flash file from spd sc8810 but when i try to write it to another same phone i see

Please read the phone partition.
>>Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.

how to slove this problem

**aZimBahar** · 09-28-2013, 15:49

Brother Not Supported AT This Moment .
Team Working For It, Soon Add Also Write Flash

MOBILE CONTROL · 09-28-2013, 17:02

ok waiting......

thankyou

abbaas · 09-28-2013, 17:22

volcano teeeeeeeeeeeeeeeeeeem plez queck add 6820-8810- again thankssssssssssss

abbas

wsesew · 09-28-2013, 18:09

same problem

Code:

  Detection initiated...
  Vcc: null
  Gnd: 7
  Analyzing D+ and D-...
  D+ = 4, D- = 3
  Analyzing USB device, please wait...
  Find USB device:SPRD U2S Diag (COM161), (VID_1782&PID_4D00)
    
    
  Internal version: SPRD3
  Boot downloaded.
  Start boot please wait a moment....
  Spreadtrum Boot Block version 1.1
  Boot downloaded.
  Flash ID: 002C00BC90555600
  Flash Type:[Micron] MT29C4G48MAZAPAKD
  FLASH LEN:0x20000000
  Please read the phone partition.
>>Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.

bright hlatini · 09-28-2013, 18:51

m horse mini 9500 dead after format with v2.3

Port:COM18
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Available Ports:COM1 COM2 COM3 COM18 COM227
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Find USB device:SPRD U2S Diag (COM19), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
Flash ID: 009800BC90667600
Flash Type:[TOSHIBA] TYBC0A111236KC10
FLASH LEN:0x20000000
Analysis flash internal data...10%
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Find USB device:SPRD U2S Diag (COM19), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
Flash ID: 009800BC90667600
Flash Type:[TOSHIBA] TYBC0A111236KC10
FLASH LEN:0x20000000
mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 240m(system),150m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic)
Analysis flash internal data successfully.
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Analyzing USB device, please wait...
Find USB device:SPRD U2S Diag (COM19), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 240m(system),150m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic)
Analysis flash internal data successfully.
>>Set to Factory successfully.

sweet4hamza · 09-28-2013, 19:00

read flash file in pac format and write with factory flasher , problem will be solve

bsl_bappy · 09-28-2013, 20:15

Quote:

Originally Posted by MOBILE CONTROL

hello i read flash file from spd sc8810 but when i try to write it to another same phone i see

Please read the phone partition.
>>Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.

how to slove this problem

oneman please explain me about my thinking. I think that volcano changed read file format from bin to pac format. so he can write pac file from ResearchDownload.exe. isn't it?

**aZimBahar** · 09-29-2013, 04:01

@ bsl_bappy If User Read To Factory Format Then Can Make PAC File Then Can Write ResearchDownload.exe

binaybiswas · 09-29-2013, 04:49

Quote:

Originally Posted by MOBILE CONTROL

hello i read flash file from spd sc8810 but when i try to write it to another same phone i see

Please read the phone partition.
>>Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.

how to slove this problem

Flash with RX,TX pinout & keep RX,TX mode to volcanotools

bsl_bappy · 09-29-2013, 06:57

Quote:

Originally Posted by binaybiswas

Flash with RX,TX pinout & keep RX,TX mode to volcanotools

not possible to support rx tx 8810, 6820.

wahid_2 · 09-29-2013, 07:20

Hi Team,

We need good update to make alive again 6820/8810 killed by volcanobox (by format or one key Root...)

plz dooooooooooo

sweet4hamza · 09-29-2013, 07:22

Quote:

Originally Posted by binaybiswas

Flash with RX,TX pinout & keep RX,TX mode to volcanotools

spd anderoid phone can not boot on rx tx

MOBILE CONTROL · 09-29-2013, 08:14

Quote:

Originally Posted by sweet4hamza

read flash file in pac format and write with factory flasher , problem will be solve

i do that but same problem show me this message

juwana_pati · 09-29-2013, 11:07

we need using usb modify boot mode , not only using jig cable to find d+ and d- for spd android tablet 6820/8810 because other product not only using jig also .....

09-28-2013, 14:54	#1 (permalink)
MOBILE CONTROL Freak Poster Join Date: Jun 2012 Posts: 253 Member: 1769097 Status: Offline Sonork: 1001597271 Thanks Meter: 35	sc8810_read ok but canot write hello i read flash file from spd sc8810 but when i try to write it to another same phone i see Please read the phone partition. >>Ready to read/write again, please remove the power supply clip or battery and then re-loaded it. how to slove this problem

09-28-2013, 15:49	#2 (permalink)
aZimBahar Product Manager Join Date: Dec 2009 Location: CEO.of.ROMDevelopers Age: 32 Posts: 16,030 Member: 1174508 Status: Offline Sonork: 100.1593820 Thanks Meter: 11,979	Brother Not Supported AT This Moment . Team Working For It, Soon Add Also Write Flash

09-28-2013, 17:02	#3 (permalink)
MOBILE CONTROL Freak Poster Join Date: Jun 2012 Posts: 253 Member: 1769097 Status: Offline Sonork: 1001597271 Thanks Meter: 35	ok waiting...... thankyou

09-28-2013, 17:22	#4 (permalink)
abbaas Freak Poster Join Date: Feb 2010 Location: karachi pakistan Posts: 472 Member: 1237819 Status: Offline Sonork: [email protected] Thanks Meter: 148	volcano teeeeeeeeeeeeeeeeeeem plez queck add 6820-8810- again thankssssssssssss abbas

09-28-2013, 18:51	#6 (permalink)
bright hlatini No Life Poster Join Date: Jul 2011 Location: malawi Posts: 1,121 Member: 1614640 Status: Offline Thanks Meter: 468	m horse mini 9500 dead after format with v2.3 Port:COM18 After format or Flash you have to press & hold power button for at least 1.30 mins. Note for win7 users : Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'. After that the spd drivers will have the ability to be loaded. Available Ports:COM1 COM2 COM3 COM18 COM227 Detection initiated... Vcc: null Gnd: 5 Analyzing D+ and D-... D+ = 3, D- = 2 Analyzing USB device, please wait... Find USB device:SPRD U2S Diag (COM19), (VID_1782&PID_4D00) Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.1 Boot downloaded. Flash ID: 009800BC90667600 Flash Type:[TOSHIBA] TYBC0A111236KC10 FLASH LEN:0x20000000 Analysis flash internal data...10% Detection initiated... Vcc: null Gnd: 5 Analyzing D+ and D-... D+ = 3, D- = 2 Analyzing USB device, please wait... Find USB device:SPRD U2S Diag (COM19), (VID_1782&PID_4D00) Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.1 Boot downloaded. Flash ID: 009800BC90667600 Flash Type:[TOSHIBA] TYBC0A111236KC10 FLASH LEN:0x20000000 mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 240m(system),150m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic) Analysis flash internal data successfully. Detection initiated... Vcc: null Gnd: 5 Analyzing D+ and D-... D+ = 3, D- = 2 Analyzing USB device, please wait... Find USB device:SPRD U2S Diag (COM19), (VID_1782&PID_4D00) Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.1 Boot downloaded. mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 240m(system),150m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic) Analysis flash internal data successfully. >>Set to Factory successfully.

09-28-2013, 19:00	#7 (permalink)
sweet4hamza No Life Poster Join Date: Nov 2010 Location: Atif mobile,goal, faisalabad Posts: 12,041 Member: 1434736 Status: Offline Sonork: 100.1607275 Thanks Meter: 5,377	read flash file in pac format and write with factory flasher , problem will be solve

09-29-2013, 04:01	#9 (permalink)
aZimBahar Product Manager Join Date: Dec 2009 Location: CEO.of.ROMDevelopers Age: 32 Posts: 16,030 Member: 1174508 Status: Offline Sonork: 100.1593820 Thanks Meter: 11,979	@ bsl_bappy If User Read To Factory Format Then Can Make PAC File Then Can Write ResearchDownload.exe

09-29-2013, 07:20	#12 (permalink)
wahid_2 Freak Poster Join Date: Apr 2008 Location: Free Palestine Posts: 467 Member: 755916 Status: Offline Thanks Meter: 28	Hi Team, We need good update to make alive again 6820/8810 killed by volcanobox (by format or one key Root...) plz dooooooooooo

09-29-2013, 11:07	#15 (permalink)
juwana_pati Freak Poster Join Date: May 2007 Posts: 128 Member: 507911 Status: Offline Thanks Meter: 22	we need using usb modify boot mode , not only using jig cable to find d+ and d- for spd android tablet 6820/8810 because other product not only using jig also .....