Tecno D3 MTK6575 Dead after erasing full flash... please help

[binadam23]

Last 4 weeks I try to Format a phone; Tecno D3 MTK6575 Android. Mistakenly instead of me to check Auto Format or enter the distance of formating manually (in mtk tab) I check full flash format...!

I switch on the phone on but it couldn't switch on, that didn't anoy me because I face this problem before (with geonee p2 mtk cpu also) and solve it by flashing it with .bin flash backup.
But this time although I have the flash file backup of this phone Tecno D3 both .bin flash file and fac flash file, I was unable to revive this phone because when I click to flash the phone, After volcano finish reading the process will end.

See the Log below:

What do you think is wrong.....? Please don't ignore my request if you know otherwise please tell me if you don't....


Log:
If i choose to use "write Flash" in MTK tab i get this log:
================================================== =================
================================================== =================
Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:6575
Hardware version:CB00
Software version:E201
Boot downloading complete!
FlashID:002C00BC00900055
Flash Type: NAND_MT29C4G48MAZAPAKD
FlashLen:20000000

Format range: Start Address: 0x000000,Format Length :0x1EB80000
Flash erasing complete!
>>Analysis of USB port...
================================================== =================
================================================== =================


and also if i choose to "Write Fac File" in Android tab i get this log:
================================================== =================
================================================== =================
Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:6575
Hardware version:CB00
Software version:E201
Boot downloading complete!
FlashID:002C00BC00900055
Flash Type: NAND_MT29C4G48MAZAPAKD
FlashLen:20000000

>>Analysis of USB port...
================================================== =================
================================================== =================

[binadam23]

hope some one will help................

[binadam23]

Still waiting...........

[binadam23]

Qaisar Mahmood, Moiz Khan, Volcano Box, Faisal_Computer, Umesh_Arora*and Co. Why can't you help me..........?

[laxmi kamlesh]

@binadam23

hi

>>Analysis of USB port...

short GND to Kolo,kcolo,boot point.

and connect mobile and do again .

if same error you got then post here Device manager screen shot. when software say (>>Analysis of USB port...).

............................

[binadam23]

Originally Posted by laxmi kamlesh

@binadam23

hi



short GND to Kolo,kcolo,boot point.

and connect mobile and do again .

if same error you got then post here Device manager screen shot. when software say (>>Analysis of USB port...).

............................

Please Is there No tutorial on how to short GND to Kolo,kcolo,boot point.?
Because I have never due such thing with volcano before......

If yes, then link me to the page/video in order to learn...
If no, then please if you can help guide me I will be more gratelful...

[laxmi kamlesh]

hi thanks for co-operate with us

http://forum.gsmhosting.com/vbb/f723...boots-1658331/

read carefully and try to do same.

if still failed then i am also here.

[binadam23]

Thanks you very much......
I will try and give a feedback.....

[THE GREAT ONE]

Originally Posted by binadam23

Thanks you very much......
I will try and give a feedback.....

did it work for you?.............

[binadam23]

Nope I didn't try because its a long process, I am not professional in soldering and I will start my exam @school this week.... So I will just try later