TT800 MSTAR - CPU BootLoad Error. ID:1513

[MARVZ_TG]

14:20:42 Welcome to use McnPro light Box
14:20:42 Baud setting ...
14:20:47 Set Baud done
14:20:47 SW V12.18
14:20:47 FW 3.09
14:20:47 SN
14:20:47 AC
14:20:47 Box Connected!
14:20:58 Mstar Pinout Scaning...
14:20:58 <<.........
14:21:27 CPU: Mstar MSW853X
14:21:27 pinouts: D+:3 D-:2 Gnd:5
14:21:27 Checking port...
14:21:27 <<........
14:21:38 port:None
14:21:39 Pinout Applied
14:21:39 Phone detected, Wait...
14:23:29 Done.
14:23:29 Initialize boot6...
14:23:49 BootLoad Error. ID:1513
14:28:05 Chip Scaning,Press and HOLD Power button now !
14:28:05 <<.....
14:28:13 CPU: Mstar MSW853X
14:28:13 pinouts: D+:3 D-:2 Gnd:5
14:28:13 Checking port...
14:28:13 <<........
14:28:24 port:None
14:28:26 Pinout Applied
14:28:37 Pinout Applied
14:28:37 Phone detected, Wait...
14:29:09 User Abort
14:29:12 Mstar Pinout Scaning...
14:29:12 <<..........
14:29:25 CPU: Mstar MSW853X
14:29:25 pinouts: D+:3 D-:2 Gnd:5
14:29:25 Checking port...
14:29:25 <<........
14:29:36 port:None
14:29:37 Pinout Applied
14:29:37 Phone detected, Wait...
14:30:31 User Abort
14:30:36 Pinout Applied
14:30:36 Phone detected, Wait...
14:30:49 User Abort
14:30:51 Mstar Pinout Scaning...
14:30:51 <<..
14:30:56 CPU: Mstar MSW853X
14:30:56 pinouts: D+:3 D-:2 Gnd:5
14:30:56 Checking port...
14:30:56 <<........
14:31:07 port:None
14:31:09 Pinout Applied
14:31:09 Phone detected, Wait...
14:31:15 Done.
14:31:15 Initialize boot6...
14:31:17 BootLoad Error. ID:1522
14:31:26 Pinout Applied
14:31:26 Phone detected, Wait...
14:31:28 Done.
14:31:28 Initialize boot2...
14:31:31 Boot1 Error, Id: 1000
14:31:36 Pinout Applied
14:31:36 Phone detected, Wait...
14:31:43 Done.
14:31:43 Initialize boot2...
14:31:46 BootLoad Error. ID:1515
14:31:53 Pinout Applied
14:31:53 Phone detected, Wait...
14:31:57 Done.
14:31:57 Initialize boot3...
14:31:59 BootLoad Error. ID:1515
14:32:06 Pinout Applied
14:32:06 Phone detected, Wait...
14:32:09 Done.
14:32:09 Initialize boot4...
14:32:11 BootLoad Error. ID:1515
14:32:16 Pinout Applied
14:32:16 Phone detected, Wait...
14:32:21 Done.
14:32:21 Initialize boot5...
14:32:24 BootLoad Error. ID:1515
14:33:17 Chip Scaning,Press and HOLD Power button now !
14:33:17 <<......
14:33:26 User Abort
14:33:35 Mstar Pinout Scaning...
14:33:35 <<
14:33:38 CPU: Mstar MSW853X
14:33:38 pinouts: D+:3 D-:2 Gnd:5
14:33:38 Checking port...
14:33:38 <<.............
14:34:18 port:None
14:34:19 Pinout Applied
14:34:19 Phone detected, Wait...
14:34:25 Done.
14:34:25 Initialize boot5...
14:34:27 BootLoad Error. ID:1515
14:34:45 Chip Scaning,Press and HOLD Power button now !
14:34:45 <<.......
14:35:58 Error! Pinout scan failed, Please check connection.

[Mcnbox]

this problem becuase the detected port at unstable states. to fix that need to reinstall the mstar driver. and ensure usb output voltage. well , we will be improve our software be more easily for customer (this will be available in the version 12.20).

Thanks,

Mcnbox

[MARVZ_TG]

OK thank for for replay me plz accept me in ym. [email protected] & sonork

i have new chinaphone for test

[MARVZ_TG]

hello bro i think not supported cpu or flash ic

i try to another mstar cpu working find

09:37:58 Welcome to use McnPro light Box
09:37:58 Baud setting ...
09:38:00 Set Baud done
09:38:00 SW V12.19
09:38:00 FW 3.09
09:38:00
09:38:00
09:38:00 Box Connected!
09:38:45 Mstar Pinout Scaning...
09:38:45 <<
09:38:47 Please connect the Tran-clamps to the phone
09:38:56 Mstar Pinout Scaning...
09:38:56 <<
09:39:47 User Abort
09:39:50 Welcome to use McnPro light Box
09:39:50 Baud setting ...
09:39:51 Set Baud done
09:39:51 SW V12.19
09:39:51 FW 3.09
09:39:51
09:39:51 3
09:39:51 Box Connected!
09:39:55 Mstar Pinout Scaning...
09:39:55 <<
09:40:02 CPU: Mstar MSW853X
09:40:02 pinouts: D+:16 D-:17 Gnd:21
09:40:02 Checking port...
09:40:02 <<
09:41:08 port:None
09:41:09 Pinout Applied
09:41:09 Phone detected, Wait...
09:41:15 Done.
09:41:15 Initialize boot3...
09:41:16 Boot Done.
09:41:16 Flash Type NOR
09:41:16 Flash ID 00EC2404
09:41:16 Flash Model SAMSUNG_K5N2833
09:41:16 Flash Size 0x1000000(16.0M)
09:41:16 Reading,Wait...
09:41:16 Read Error. ID:1569
09:41:25 Pinout Applied
09:41:25 Phone detected, Wait...
09:41:35 Done.
09:41:35 Initialize boot3...
09:41:36 Boot Done.
09:41:36 Flash Type NOR
09:41:36 Flash ID 00EC2404
09:41:36 Flash Model SAMSUNG_K5N2833
09:41:36 Flash Size 0x1000000(16.0M)
09:41:36 Reading,Wait...
09:41:36 Read Error. ID:1568
09:41:43 Pinout Applied
09:41:43 Phone detected, Wait...
09:42:14 Done.
09:42:14 Initialize boot1...
09:42:16 Boot1 Error, Id: 1000
09:42:20 Pinout Applied
09:42:20 Phone detected, Wait...
09:42:23 Done.
09:42:23 Initialize boot2...
09:42:26 BootLoad Error. ID:1515
09:42:36 Pinout Applied
09:42:36 Phone detected, Wait...
09:42:39 Done.
09:42:39 Initialize boot3...
09:42:40 Boot Done.
09:42:40 Flash Type NOR
09:42:40 Flash ID 00EC2404
09:42:40 Flash Model SAMSUNG_K5N2833
09:42:40 Flash Size 0x1000000(16.0M)
09:42:40 Reading,Wait...
09:42:40 Read Error. ID:1570
09:42:48 File saved:\MARVZ_FLASHFILES\CHINA box back up\volcano back up\MSTAR\Mstar_SAMSUNG_K5N2833.bin
09:43:14 Pinout Applied
09:43:14 Phone detected, Wait...
09:43:17 Done.
09:43:17 Initialize boot3...
09:43:18 Boot Done.
09:43:18 Flash Type NOR
09:43:18 Flash ID 00EC2404
09:43:18 Flash Model SAMSUNG_K5N2833
09:43:18 Flash Size 0x1000000(16.0M)
09:43:18 Eraseing Flash...
09:43:18 Write Error. ID:1583
09:43:23 Pinout Applied
09:43:23 Phone detected, Wait...
09:43:27 Done.
09:43:27 Initialize boot3...
09:43:28 Boot Done.
09:43:28 Flash Type NOR
09:43:28 Flash ID 00EC2404
09:43:28 Flash Model SAMSUNG_K5N2833
09:43:28 Flash Size 0x1000000(16.0M)
09:43:28 Eraseing Flash...
09:43:29 Write Error. ID:1703
09:43:43 Pinout Applied
09:43:43 Phone detected, Wait...
09:43:46 Done.
09:43:46 Initialize boot3...
09:43:47 Boot Done.
09:43:47 Flash Type NOR
09:43:47 Flash ID 00EC2404
09:43:47 Flash Model SAMSUNG_K5N2833
09:43:47 Flash Size 0x1000000(16.0M)
09:43:47 Eraseing Flash...
09:43:48 Write Error. ID:1703
09:43:54 Pinout Applied
09:43:54 Phone detected, Wait...
09:43:58 Done.
09:43:58 Initialize boot3...
09:43:59 Boot Done.
09:43:59 Flash Type NOR
09:43:59 Flash ID 00EC2404
09:43:59 Flash Model SAMSUNG_K5N2833
09:43:59 Flash Size 0x1000000(16.0M)
09:43:59 Eraseing Flash...
09:43:59 Write Error. ID:1583
09:44:19 Pinout Applied
09:44:19 Phone detected, Wait...
09:44:22 Done.
09:44:22 Initialize boot4...
09:44:24 BootLoad Error. ID:1515
09:44:29 Pinout Applied
09:44:30 Phone detected, Wait...
09:44:34 Done.
09:44:34 Initialize boot5...
09:44:35 Boot Done.
09:44:35 Flash Type NOR
09:44:35 Flash ID 00EC2404
09:44:35 Flash Model SAMSUNG_K5N2833
09:44:35 Flash Size 0x1000000(16.0M)
09:44:35 Eraseing Flash...
09:45:45 Erase Done.
09:45:45 Writing,Wait...
09:47:32 Write Done.
09:47:38 Pinout Applied
09:47:38 Phone detected, Wait...
09:47:49 Done.
09:47:49 Initialize boot5...
09:47:50 Boot Done.
09:47:50 Flash Type NOR
09:47:50 Flash ID 00EC2404
09:47:50 Flash Model SAMSUNG_K5N2833
09:47:50 Flash Size 0x1000000(16.0M)
09:47:50 Eraseing Flash...
09:49:01 Erase Done.
09:49:01 Writing,Wait...
09:50:48 Write Done.

[Mcnbox]

Could you open the phone , let me know the Flash IC ? take a picture is ok , or simple tell me the marked code etc.


Best regards!

Mcnbox

[MARVZ_TG]

Originally Posted by Mcnbox

Could you open the phone , let me know the Flash IC ? take a picture is ok , or simple tell me the marked code etc.


Best regards!

Mcnbox

I HAVE DONE THIS MODEL LAST MONTH BY OTHER TOOLS

DONE BY CLICK HERE

Detecting D+ and D-...
Vcc: null
Gnd: 20
Detection initiated...
D+ = 22, D- = 23
Detection D+/D- with 0.88 seconds.
Continue to detect BOOT pin...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
BOOT(Pull Down) = 18 21
Detection completed.
Detection initiated...
Vcc: null
Gnd: 20
Analyzing D+ and D-...
D+ = 22, D- = 23
Detection D+/D- with 1.67 seconds.
Continue to detect BOOT pin...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
BOOT(Pull Down) = 18 21
Setting...
Set the Pinouts failed,please reconnect and try again!
Detection initiated...
Vcc: null
Gnd: 20
Analyzing D+ and D-...
D+ = 22, D- = 23
Detection D+/D- with 2.13 seconds.
Continue to detect BOOT pin...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
BOOT(Pull Down) = 18 21
Setting...
Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
Pinouts setting complete!
Device not found, please re-select the port, or USB reset
If the phone ready to read and write again, please re-plug the USB or reset the pinouts.
Reset USB device and search it...
Time-out, try again, or re-plug your phone, or re-defined pinouts.
Detection initiated...
Vcc: null
Gnd: 20
Analyzing D+ and D-...
D+ = 22, D- = 23
Detection D+/D- with 1.20 seconds.
Continue to detect BOOT pin...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
BOOT(Pull Down) = 18 21
Setting...
Find USB device:USB Mass Storage Device, (VID_1B20&PID_0300)
Pinouts setting complete!
Connecting to phone...
Connection success!
Boot downloading finished.
Flash Type: GIGA_GD25Q64
Flash ID: 00C8601700000000
Flash Size: 00800000h
Read phone information seccess.
Detection initiated...
Vcc: null
Gnd: 20
Analyzing D+ and D-...
D+ = 22, D- = 23
Detection D+/D- with 1.47 seconds.
Continue to detect BOOT pin...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
BOOT(Pull Down) = 18 21
Setting...
Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
Pinouts setting complete!
Device not found, please re-select the port, or USB reset
If the phone ready to read and write again, please re-plug the USB or reset the pinouts.
Reset USB device and search it...
Time-out, try again, or re-plug your phone, or re-defined pinouts.
Detection initiated...
Vcc: null
Gnd: 20
Analyzing D+ and D-...
D+ = 22, D- = 23
Detection D+/D- with 1.80 seconds.
Continue to detect BOOT pin...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
BOOT(Pull Down) = 18 21
Setting...
Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
Pinouts setting complete!
Device not found, please re-select the port, or USB reset
If the phone ready to read and write again, please re-plug the USB or reset the pinouts.
Reset USB device and search it...
Time-out, try again, or re-plug your phone, or re-defined pinouts.
Detection initiated...
Vcc: null
Gnd: 20
Analyzing D+ and D-...
D+ = 22, D- = 23
Detection D+/D- with 1.31 seconds.
Continue to detect BOOT pin...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
BOOT(Pull Down) = 18 21
Setting...
Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
Pinouts setting complete!
Device not found, please re-select the port, or USB reset
If the phone ready to read and write again, please re-plug the USB or reset the pinouts.
Reset USB device and search it...
Time-out, try again, or re-plug your phone, or re-defined pinouts.
Detection initiated...
Vcc: null
Gnd: 20
Analyzing D+ and D-...
D+ = 22, D- = 23
Detection D+/D- with 1.22 seconds.
Continue to detect BOOT pin...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
BOOT(Pull Down) = 18 21
Setting...
Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
Pinouts setting complete!
Device not found, please re-select the port, or USB reset
If the phone ready to read and write again, please re-plug the USB or reset the pinouts.
Reset USB device and search it...
Time-out, try again, or re-plug your phone, or re-defined pinouts.
Detection initiated...
Vcc: null
Gnd: 20
Analyzing D+ and D-...
D+ = 22, D- = 23
Detection D+/D- with 2.23 seconds.
Continue to detect BOOT pin...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
BOOT(Pull Down) = 18 21
Setting...
Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
Pinouts setting complete!
Device not found, please re-select the port, or USB reset
If the phone ready to read and write again, please re-plug the USB or reset the pinouts.
Detection initiated...
Vcc: null
Gnd: 20
Analyzing D+ and D-...
D+ = 22, D- = 23
Detection D+/D- with 1.28 seconds.
Continue to detect BOOT pin...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
BOOT(Pull Down) = 18 21
Setting...
Set the Pinouts failed,please reconnect and try again!
Detection initiated...
Vcc: null
Gnd: 20
Analyzing D+ and D-...
D+ = 22, D- = 23
Detection D+/D- with 0.98 seconds.
Continue to detect BOOT pin...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
BOOT(Pull Down) = 18 21
Setting...
Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
Pinouts setting complete!
Connecting to phone...
Connection success!
Boot downloading finished.
Flash Type: GIGA_GD25Q64
Flash ID: 00C8601700000000
Flash Size: 00800000h
CPU : 8533d/8532_series
Flash Erasing finished
Flash Writing finished.
Phone Lock or SIM Lock:
0000
Anti-theft lock:
460000
460001
466001
4600
4660
screen lock: