IMEI repair on Blackberry 9700, 8900, 8520 always fails Im new to PB, I bought it for it BB tools, just had couple of days, and im just doing something wrong and im wondering if anyone can tell me what. So, attempting to repair imei or pin I allways get a FAIL on every boot check. Heres what im going. Yes: BB drivers are all ok I have MFI I have DM (disabled) I have the ROM download from Blackberries website. Firstly I do the steps create a new IMEI and save them for later Connect phone with no battery to usb Click connect, first I get the model, but not all fields then click connect again and I get the boot rom, and start the copy. I upload the MFI... Then phone reboots I go into change IMEI give the new number. Two things happen, the first it gets stuck on the first rom check, then after a while the phone boots, into no application linked (factory os), then the list continues and everything is a fail show the IMEI its writting and stops If i do the same for PIN same thing happens. I think I have the sequence correct, but what I dont find documented is if I have to do something like insert a battery or take out a usb, ive been trying combinations, several hours later with no luck im posting here to see if anyone recognises the errors of my ways ... This is happening on a 9700, 8900 and 8520 .... Any help would be greatly appreciated. Im sure many of you have done it before so whats the trick im missing. Im running W7 (stupid smart reader drivers) but I also have a a XP setup and same results. |
Always post with screenshot, bro For old device, can be used only with FOS ( using special file ) for the new device, can be used with the following conditions: FOS + RTAs is ok. How's RTAs ok? could the "mfi bug / mfi bypass RTAs', auth servers via RTAs, patching Br, |
Quote:
Sure screenshots not a problem. I found the Special 8900, 3 versions. New security as its 03 / 04 / 05 in IMEI I so upload each one and take turns testing When do you activate the RTAS server? Currently I have tried - on from the beginning, whilst FOS flash - on only before I choose the IMEI change option - yes, firewall open (havent tested firewall off) another thing so I connect phone no battery, usb connects audio happens and I can flash rew rom , erase all ok and phone allways stays on black screen. When trying IMEI/PIN repair, the phone after a minute goes to the white (factory os) screen, Im I correct to think that all operations performed should allways be before the phone boots into white screen (factory os) or should I wait for the factory os screen to boot? once i figure this out I will do a really good video for the community to answer these questions. Thank you BR |
bro, post your screenshot PBTOOL have done change imei blackberry 8900 and 9500 "inject special files" conformed type of Blackberry, then change imei and PIN in TAB TOOL after inject special files or in FOS mode "with special files". Br, |
I've made a video of what im doing.... http://www.youtube.com/watch?v=eyAVU8Bn__Q Do you still need a screen shot? |
Quote:
as i saw your video, you got wrong step, bro Please Set that device in normal condition, means u need flash again. after that .... Here is correct step : 1. Press Set Normal Mode Button ( Not press "STP Factory OS" Button ) 2. Choose and put Special File for BB 8900 3. wait until done 4. Go to Tool Tab Menu 5. Press IMEI button , write imei that u wanna change 6. Press OK then DONE ! Post the result with screenshot Br, |
Quote:
I did all the steps, full erase, fresh firmware, set normal with the 3 versions, rtas, however no luck, heres the video... 89002 - YouTube |
Quote:
|
Quote:
|
How to write flash with backup file?http://www.jonneale.info/9.jpg |
So I've somehow managed to brick the phone I've been testing with. 8900 Orange Uk Ive taken the rom from BB's website 8900M_PBr5.0.0_rel1168_PL5.2.0.67_A5.0.0.681_Orang e_UK But im stuck in waiting for JVM using DM or PB. Same with downgrade. Full wipe, etc, not helping... What a day, one step forward a few more back ... Whats the best way to bring it back to life ... What I can tell you is the pin listed in the info is not the original. I have a headache now... Current info: ID: 0x84001503 Model: 8900 Radio: GPRS-WLAN Series: Javelin Colour: True JVM: 1.0 Camera: True Voice Rec: True Voice Note: True Keyboard: Qwerty Sound: Tunes8700g Bluetooth: True MMS: True GPS: True Getting Device Info... PIN: 218288fe VendorID: 142 BOOTROM Bootrom Version: 5.5.0.19 Bootrom Hardware ID: 0x84001503 RIM BlackBerry Device Bootrom HW ID Override: None Bootrom OS ID: None Bootrom Build Time: 15:22:54 Bootrom LDR Blocks: 0x87FEA224 Bootrom Size: 0x00020000 FLASH CHIP Number of chips: 1 Flash ID: NAND blocks 0-2020 Device ID: 0x44 Vendor ID: 0xEC Version ID: 0 Total Size: 252.6 MB MEMORY MAP App c_main: 0x80BF1F44 API Checksum: 0x00000000 OS INFO OS Version: 5.2.0.67 Hardware ID: 0x84001503 RIM BlackBerry Device Supported Bands: 0x0000FFFF Metrics Version: 3.16 FS Code Version: 10.0.0.0 FAT Code Version: 2.32 Build User: absadmin SV Number: 24 OS Address: 0x80000000-0x80E684AF Companion Binary: 0.0.0.0 RAM usage: 0x874FFFFC-0x87FFFFFC IRAM End: 0x4009E4F0 DSP ROM2 Address: *not present* OS Extended Addr: 0x80CC09C8 LDR Blocks: 0x80DA83A8 API Checksum: 0x00000000 JumpTable (<3): 0x800002A8 JumpTable (>2): 0x800025C4 Radio Code: Orpheus radio code linked OS API Version: 134.15 VERSION TABLE OS API Version: 134.15 STP protocol version: 5.203.4 BlockFS API Version: 10.0.0.0 USB driver version: 02.01 Bugdisp RTAS key: 1.0 STP RTAS key: 1.0 NVSIG RTAS key: 1.0 FAT FS Version: 2.32 Block map version: 2.15 WLAN radio version: 3.0.0.113 KERNEL Kernel Version: 1.13.0.307 Hardware ID: 0x84001503 RIM BlackBerry Device Metrics Version: 1.1 Read Info Completed! |
Quote:
BlackBerry - Desktop & Device Software Download Sites for BlackBerry users - US |
Please Set that device in normal condition, means u need flash again. after that .... Here is correct step : 1. Press Set Normal Mode Button ( Not press "STP Factory OS" Button ) 2. Choose and put Special File for BB 8900 3. wait until done 4. Go to Tool Tab Menu 5. Press IMEI button , write imei that u wanna change 6. Press OK then DONE ! please using battrey, bro for all operation what's your YM ID or Sonork ID ? Let me add u :) Br, |
Quote:
Yahoo: bbunlock Get in touch any time ... thank you ... |
Quote:
thx good day for you :D Br, |
Quote:
bro,plz request your sonork ID .....thx |
@dj.adam Post your sonork id let me add u maybe u can send by PM Br, |
pb tool no rebuild imei 8520 does not work with 8520, I loaded MFI-24380-014 through stp/factoryOS and written with imei change imei, but it stops giving the error in the screenshot Process Start [21.34.58] Connected. Boot [18x07FF15]....FAIL! Boot [08x0A01]....FAIL! Boot [0Cx02FF]....FAIL! Boot [0Cx16FF]....FAIL! Boot [1Cx80FE]....FAIL! Boot [18x07FF17]....FAIL! Boot [18x07FF18]....FAIL! Boot [1Cx80FE06]....FAIL! Boot [1Cx80FE07]....FAIL! Boot [0CxC2F0]....FAIL! Boot [60x54FE00]....FAIL! Boot [60x54FE01]....FAIL! Boot [60x54FE02]....FAIL! Please Wait... Write IMEI : 359199048291675 I have tried both with and without battery |
@comes for new security , not supported yet for this moment thx |
ok thanks, so pbtool is xxxx , it just firmware upgrade for new security ,forgive me but for firmware there is blackberry desktop manager with vendor deleted |
can pb tool repair 0 mep left ? if can i can bought it..... |
Quote:
for the new device, can be used with the following conditions: FOS + RTAs is ok. How's RTAs ok? could the "mfi bug / mfi bypass RTAs', auth servers via RTAs, patching Quote:
Big Thanks for your attention, sure Pbtool will be added about good features ! one by one will be shared to all! again big thanks for your love and attention Br, |
pbtool then can manage imei rebuild for new security blackberry ? example 8520, 9780. ths |
Quote:
Follow this step for guide you : 1. Press " STP / Factory OS " button then put special file from folder then click "Open" wait until process done! 2. Go to "Tool" Tab > then press change imei > put and write imei number that you want on there! > then click ok 3. After that, press " Set Normal Mode " button, and choose the SFI File ( must be same version of SFI that Device had ) and press "Open" 4. Wait until it has written to the device. Done. 5. Phone will restart after it finished. For New security, such as your question pbtool not supported yet for this moment already explained to u i wanna ask to u which tool can do new security? u know why ? Because for the new device, can be used with the following conditions: FOS + RTAs is ok. How's RTAs ok? could the "mfi bug / mfi bypass RTAs', auth servers via RTAs, patching and this is our features for next ! all will do and share to u all one by one ! have a nice day ! Br, |
waiting for good news about new security Blackberry |
|
@BABA5031 Better u read manual PBTool check here : http://forum.gsmhosting.com/vbb/8755400-post1.html dont make double post to confuse with other http://forum.gsmhosting.com/vbb/f740...-help-1607404/ thx |
Quote:
|
hi is the 9700 and 8520 new security? |
Quote:
Br, -ard- |
new security hi do you think there will be a way to do the new security phones or do you think this is inpossible thanks and whats the RTA thanks |
it's possible change imei on blackberry 9300? in download i can't see a special file to download thank's |
@glelectronics yes no have, bro that type is new security one |
Help Quote:
what do you mean when you talk about special file? from where can I download it? tnx soooo much |
card reader Quote:
|
Quote:
go and get pbtool distri and reseller http://forum.gsmhosting.com/vbb/f740...-list-1487377/ Thx |
sp what is the special file for? |
imei rebuild new security with the version PBTool v.1.4.0.40 manages imei rebuild of 9360 and 9780 which have new security ? |
to all of u in this thread please read carefully PBTOOL Manual if you just asking ...all your question already answered on there got it, .... http://forum.gsmhosting.com/vbb/f740...users-1536510/ thx |
imei change new security ok ,version.1.4.0.40 yet does not handle new security !! |
does Quote:
does this work then as gthey are new security |
whats the rtas button for on the tool is it something with security as i preeded it and just comes up saying username and password also has any one used the radio lab tool can this not change /repair imei on new security do it need to have a dongle to use ot out |
hi whats this new sd card cable do ? |
Where I can buy This dongle, please? |
Quote:
please check here link : http://forum.gsmhosting.com/vbb/f740...-list-1487377/ |
new security Quote:
hi if i use the new sd cable can it do imei repair on new security or is it just for mep reset thanks |
Quote:
|
any Quote:
any look with trying that cable |
br more hot news on the way our pbtool best all imei repair mep0 add upcoming update |
Thank you for this good news, sir. |
All times are GMT +1. The time now is 20:55. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -