MTK Flashtool 6280

[coolirc]

Hello i'm using MTK Flash tool version V5.1320 for flashing MT6280 based cpu phones i have a problem with a phone that says the flash memory is not the same error 5057 and 5095 error



how can enable the debugging or the logging for the application a friend told me that it was cntl + something ... i need to enable logging to check what's wrong with that chip .


thanks for help

[coolirc]

Hello i found the combination , you 'll need to run Flashtool using Admin Rights , right click on flash tool and execute with Admin rights ...
because it will save the logs in C:\ and to access C:\ to write files you'll need admin rights .

then you'll need to hit on CTRL + ALT + T

three files will be created in C:\

BROM_API.log
BROM_DLL.log ----> the interessting file which will have all the logs .
META_DLL.log



also i need help here are the logs attached for detecting the flash chip it seems there are two separate chips and i can't get the boot process to succeed.

06/24/19 18:05:12.713 BROM_DLL[7356][5556]: ParseConfigFile() (Utility.cpp:2583)
06/24/19 18:05:12.713 BROM_DLL[7356][5556]: call ConfigToYAMLDocumentNode() (Utility.cpp:2591)
06/24/19 18:05:12.723 BROM_DLL[7356][5556]: LoadExternalMemorySetting_Ext() (Utility.cpp:2203)
06/24/19 18:05:12.723 BROM_DLL[7356][5556]: LoadFlashInfo(): NAND (Utility.cpp:2035)
06/24/19 18:05:12.723 BROM_DLL[7356][5556]: LoadFlashInfo(): NAND (Utility.cpp:2035)
06/24/19 18:05:12.723 BROM_DLL[7356][5556]: LoadFlashInfo(): NAND (Utility.cpp:2035)
06/24/19 18:05:12.723 BROM_DLL[7356][5556]: LoadFlashInfo(): NAND (Utility.cpp:2035)
06/24/19 18:05:12.723 BROM_DLL[7356][5556]: LoadFlashInfo(): NAND (Utility.cpp:2035)
06/24/19 18:05:12.723 BROM_DLL[7356][5556]: DL_GetBMTPoolAddress(): DL_HANDLE->rwlock: READ_LOCK ... (rwlock.cpp:371)
06/24/19 18:05:12.723 BROM_DLL[7356][5556]: DL_GetBMTPoolAddress(): DL_HANDLE->rwlock: READ_UNLOCK. (rwlock.cpp:389)
06/24/19 18:05:12.723 BROM_DLL[7356][5556]: -------------------- FlashReadback(): Begin ----------------->>> (Mdebug.cpp:158)
06/24/19 18:05:12.723 BROM_DLL[7356][5556]: callback_set_rts_dtr(): successfully pull high RTS and DTR! (flashtool_api.cpp:83)
06/24/19 18:05:12.723 BROM_DLL[7356][5556]:     com_sentry::Reset(COM114): OK!, m_hCOM(13432), baudrate(115200). (com_sentry.cpp:542)
06/24/19 18:05:12.723 BROM_DLL[7356][5556]:     com_sentry::Open(COM114): CreateFile OK!, m_hCOM(13432), baudrate(115200). (com_sentry.cpp:649)
06/24/19 18:05:12.723 BROM_DLL[7356][5556]: DA_cmd::DA_cmd(): m_p_stopflag(0x00622C38)=0. (da_cmd.cpp:114)
06/24/19 18:05:12.723 BROM_DLL[7356][5556]: FlashTool_Connect(): successfully create p_ft_handle(0x1A3DFAEC)={ FLASHTOOL_API_HANDLE(0x002FCC18) }.  (flashtool_api_internal.cpp:400)
06/24/19 18:05:12.723 BROM_DLL[7356][5556]: FlashTool_Connect(0x002FCC18): DA_HANDLE->rwlock: READ_LOCK ... (rwlock.cpp:371)
06/24/19 18:05:12.733 BROM_DLL[7356][5556]: FlashTool_Connect(0x002FCC18)(): AUTO_DETECT_BBCHIP(254), EXT_26M(2).  (brom.cpp:851)
06/24/19 18:05:12.733 BROM_DLL[7356][5556]: FlashTool Env Arg Battery: 0 (flashtool_api_internal.cpp:433)
06/24/19 18:05:12.733 BROM_DLL[7356][5556]: BRom_AutoBoot::Boot_FlashTool(): CALLBACK_COM_INIT_STAGE(0x0043FED4)....  (brom_autoboot.cpp:625)
06/24/19 18:05:12.733 BROM_DLL[7356][5556]: BRom_AutoBoot::BRom_StartCmd(0): ... (brom_autoboot.cpp:138)
06/24/19 18:05:12.733 BROM_DLL[7356][5556]: BRom_Base::SetBRomCommTimeouts(): SetCommTimeouts() OK! , COMMTIMEOUTS={ 0, 1, 20, 1, 300 }. (brom_base.cpp:231)
06/24/19 18:05:12.733 BROM_DLL[7356][5556]: BRom_AutoBoot::BRom_StartCmd(0): m_ext_clock(EXT_26M), SEND(0xA0)->RECV(0x5F), OK. (brom_autoboot.cpp:208)
06/24/19 18:05:12.733 BROM_DLL[7356][5556]: BRom_AutoBoot::BRom_StartCmd(0): m_ext_clock(EXT_26M), SEND(0x0A)->RECV(0xF5), OK. (brom_autoboot.cpp:208)
06/24/19 18:05:12.733 BROM_DLL[7356][5556]: BRom_AutoBoot::BRom_StartCmd(0): m_ext_clock(EXT_26M), SEND(0x50)->RECV(0xAF), OK. (brom_autoboot.cpp:208)
06/24/19 18:05:12.733 BROM_DLL[7356][5556]: BRom_AutoBoot::BRom_StartCmd(0): m_ext_clock(EXT_26M), SEND(0x05)->RECV(0xFA), OK. (brom_autoboot.cpp:208)
06/24/19 18:05:12.733 BROM_DLL[7356][5556]: BRom_Base::SetBRomCommTimeouts(): SetCommTimeouts() OK! , COMMTIMEOUTS={ 0, 1, 50, 1, 700 }. (brom_base.cpp:231)
06/24/19 18:05:12.733 BROM_DLL[7356][5556]: BRom_AutoBoot::BRom_StartCmd(0): [0] 0xA0 -> 0x5F     (brom_autoboot.cpp:282)
06/24/19 18:05:12.733 BROM_DLL[7356][5556]: BRom_AutoBoot::BRom_StartCmd(0): [1] 0x0A -> 0xF5     (brom_autoboot.cpp:282)
06/24/19 18:05:12.733 BROM_DLL[7356][5556]: BRom_AutoBoot::BRom_StartCmd(0): [2] 0x50 -> 0xAF     (brom_autoboot.cpp:282)
06/24/19 18:05:12.733 BROM_DLL[7356][5556]: BRom_AutoBoot::BRom_StartCmd(0): [3] 0x05 -> 0xFA     (brom_autoboot.cpp:282)
06/24/19 18:05:12.763 BROM_DLL[7356][5556]: BRom_Base::BRom_ReadCmd(): 0x80000000[1]={ 0xCA02 }     (brom_base.cpp:592)
06/24/19 18:05:12.793 BROM_DLL[7356][5556]: BRom_Base::BRom_ReadCmd(): 0x80000008[1]={ 0x6280 }     (brom_base.cpp:592)
06/24/19 18:05:12.823 BROM_DLL[7356][5556]: BRom_Base::BRom_ReadCmd(): 0x8000000C[1]={ 0x8F00 }     (brom_base.cpp:592)
06/24/19 18:05:12.823 BROM_DLL[7356][5556]: New chip-recognition flow... (brom_base.cpp:1617)
06/24/19 18:05:12.853 BROM_DLL[7356][5556]: BRom_Base::BRom_ReadCmd(): 0x80000000[1]={ 0xCA02 }     (brom_base.cpp:592)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: BRom_Base::BRom_ReadCmd(): 0x80000004[1]={ 0x0101 }     (brom_base.cpp:592)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: This is MT6280_S Chip (brom_base.cpp:1690)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: MT6280_S0101: Target H/W: DigitalDie={ hw_ver(0xCA02), sw_ver(0x0101), hw_code(0x6280), hw_sub_code(0x8F00) }, AnalogDie={ hw_ver(0x0101), hw_code(0x0000) } (brom_base.cpp:1879)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: BRom_AutoBoot::BRom_StartCmd(0): Pass! (brom_autoboot.cpp:319)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: BRom_Base::CreateObject(): MT6280(137), EXT_26M(2), p_bootstop(0x00622C38), ms_boot_timeout(268435455), max_start_cmd_retry_count(1). (brom_base.cpp:1404)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: Boot_FlashTool(): DA_HANDLE->rwlock: READ_LOCK ... (rwlock.cpp:371)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: DA_HANDLE(0x002EA1D8): DA("C:\Users\Admin\Downloads\Compressed\FlashTool_v5.1420.00++Azeem\FlashTool_v5.1420.00  Azeem\MTK_AllInOne_DA.bin"): m_header={ "MTK_AllInOne_DA_v5.1420.00.00", ver(4) }, sizeof(DAInfo_ST)=19468(0x00004C0C), m_default_start_addr(0x40000800), m_flu.m_buf(0x0BEC0020), m_flu.m_len(0x005EA5D4)=6202836. (flashtool_handle_internal.cpp:11181)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: BRom_Base_SV5::Boot_FlashTool(): [USB] SV5 starts... (brom_base_sv5.cpp:670)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: BRom_Base::BRom_GetVer(): enter ...  (brom_base.cpp:2360)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: BRom_Base::BRom_GetVer(): ver(0x05).  (brom_base.cpp:2381)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: BRom_Base::BRom_GetBootLoaderVer(): enter ...  (brom_base.cpp:2617)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: WARNING: BRom_Base::BRom_GetBootLoaderVer(): BOOT_LOADER_GET_VER_CMD(0xFE) is not support! (brom_base.cpp:2631)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: BRom_Base_SV5::Boot_FlashTool(): Connected to BootROM (brom_base_sv5.cpp:739)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: Start to get ME ID  (brom_base_sv5.cpp:1813)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: CSLA_SV5::BromCmd_GetME(): enter ...  (CSLA_SV5.cpp:468)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: CSLA_SV5::BromCmd_GetME(): OK.  (CSLA_SV5.cpp:511)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: BRom_Base_SV5::BRom_GetME_ID(): ME_ID = 0x54B0D473, 0xD3DD8555, 0xD7E004CB, 0x1E907420, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 (brom_base_sv5.cpp:1841)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: BRom_Base_SV5::BRom_GetME_ID(): Get ME ID successfully (brom_base_sv5.cpp:1853)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: BRom_Base_SV5::SetReg_DisableChargeControl(): Un-support operation, this operation only support MT6260/61 NOW! (brom_base_sv5.cpp:1936)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: Read16(): 0x8000000C[1] = { 0x8F00 } (FactoryCommandProtocol.cpp:86)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: Write16(): 0xA0030000[1] = { 0x2200 } (FactoryCommandProtocol.cpp:165)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: Write16(): 0x80050000[1] = { 0x2200 } (FactoryCommandProtocol.cpp:165)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: execute m_base.SetReg_LockPowerKey(). (brom_base.cpp:2796)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: CSLA_SV5::BromCmd_GetSecConf(): enter ...  (CSLA_SV5.cpp:523)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: CSLA_SV5::BromCmd_GetSecConf(): OK.  (CSLA_SV5.cpp:537)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: BRom_Base_SV5::Boot_FlashTool(): securityConfig = 0x00000000 (brom_base_sv5.cpp:972)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: BRom_Base_SV5::Boot_FlashTool(): Non-secure BB chip (brom_base_sv5.cpp:980)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: Set MB0 to Bank0 and MB1 to Bank1 (brom_mt6280.cpp:346)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: Read32(): 0xA0180070[1] = { 0x00000000 } (FactoryCommandProtocol.cpp:125)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: Write32(): 0xA0180070[1] = { 0x00000003 } (FactoryCommandProtocol.cpp:205)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: Read32(): 0x80000020[1] = { 0xA10C9200 } (FactoryCommandProtocol.cpp:125)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: Write32(): 0x80000020[1] = { 0xA00C9200 } (FactoryCommandProtocol.cpp:205)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: BRom_Base_SV5::Boot_FlashTool(): invoke m_cb_in_brom_stage(0x0043FF7C) callback function... (brom_base_sv5.cpp:1113)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: DA_HANDLE(0x002EA1D8):SearchDA(): DA[41] is selected!  (flashtool_handle_internal.cpp:11136)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: epp addr = 0x70008000 , len = 0x00002158 (brom_base_sv5.cpp:1179)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: epp param addr = 0x7000c000 , len = 0x00001000 (brom_base_sv5.cpp:1180)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: BootROMCommandProtocol::SendEPP(): packetLen = 1024 (FactoryCommandProtocol.cpp:245)
06/24/19 18:05:12.883 BROM_DLL[7356][5556]: BootROMCommandProtocol::SendEPP(): Sending EPP... (FactoryCommandProtocol.cpp:246)
06/24/19 18:05:12.923 BROM_DLL[7356][5556]: BootROMCommandProtocol::SendEPP(): EPP is executing... (FactoryCommandProtocol.cpp:278)
06/24/19 18:05:12.923 BROM_DLL[7356][5556]: BootROMCommandProtocol::SendEPP(): Dram setting entry number = 5 (FactoryCommandProtocol.cpp:293)
06/24/19 18:05:12.923 BROM_DLL[7356][5556]: BootROMCommandProtocol::SendEPP(): FlashIDs entry number = 5 (FactoryCommandProtocol.cpp:294)
06/24/19 18:05:12.923 BROM_DLL[7356][5556]: BootROMCommandProtocol::SendEPP(): Send Flash type = 1 (FactoryCommandProtocol.cpp:307)
06/24/19 18:05:12.923 BROM_DLL[7356][5556]: BootROMCommandProtocol::SendEPP(): Send nand_chip_select = (00000000) m_nand_acccon = (7007ffff)  (FactoryCommandProtocol.cpp:313)
06/24/19 18:05:12.933 BROM_DLL[7356][5556]: BootROMCommandProtocol::SendEPP(): Start get flash ID from EPP (FactoryCommandProtocol.cpp:321)
06/24/19 18:05:12.933 BROM_DLL[7356][5556]: BootROMCommandProtocol::SendEPP(): Flash id 0 = 0x00ef (FactoryCommandProtocol.cpp:327)
06/24/19 18:05:12.933 BROM_DLL[7356][5556]: BootROMCommandProtocol::SendEPP(): Flash id 1 = 0x00b1 (FactoryCommandProtocol.cpp:327)
06/24/19 18:05:12.933 BROM_DLL[7356][5556]: BootROMCommandProtocol::SendEPP(): Flash id 2 = 0x0080 (FactoryCommandProtocol.cpp:327)
06/24/19 18:05:12.933 BROM_DLL[7356][5556]: BootROMCommandProtocol::SendEPP(): Flash id 3 = 0x0055 (FactoryCommandProtocol.cpp:327)
06/24/19 18:05:12.933 BROM_DLL[7356][5556]: BootROMCommandProtocol::SendEPP(): Flash id 4 = 0x0000 (FactoryCommandProtocol.cpp:327)
06/24/19 18:05:12.933 BROM_DLL[7356][5556]: BootROMCommandProtocol::SendEPP(): Flash id 5 = 0x0000 (FactoryCommandProtocol.cpp:327)
06/24/19 18:05:12.933 BROM_DLL[7356][5556]: BootROMCommandProtocol::SendEPP(): Flash id 6 = 0x0000 (FactoryCommandProtocol.cpp:327)
06/24/19 18:05:12.933 BROM_DLL[7356][5556]: BootROMCommandProtocol::SendEPP(): Flash id 7 = 0x0000 (FactoryCommandProtocol.cpp:327)
06/24/19 18:05:12.933 BROM_DLL[7356][5556]: ERROR: <ComboMemorySettingException> [Combo Memory] The flash IDs on Target is not match the flash IDs in MAUI bin, there is no suitable EMI setting can init DRAM (thrown from () at C:\Documents and Settings\mtk03142\MTKWGT\tools\flash_tool\customer_branches\v5.1420\BootRom\FactoryCommandProtocol.cpp:368) (brom_base_sv5.cpp:2588)
06/24/19 18:05:12.933 BROM_DLL[7356][5556]: Boot_FlashTool(): DA_HANDLE->rwlock: READ_UNLOCK. (rwlock.cpp:389)
06/24/19 18:05:12.933 BROM_DLL[7356][5556]: ERROR: FlashTool_Connect(0x002FCC18): Boot_FlashTool(): fail!  (flashtool_api_internal.cpp:458)
06/24/19 18:05:12.933 BROM_DLL[7356][5556]: FlashTool_Connect(0x002FCC18): DA_HANDLE->rwlock: READ_UNLOCK. (rwlock.cpp:389)
06/24/19 18:05:12.933 BROM_DLL[7356][5556]:     com_sentry::Close(): CancelIo() Return: 1! (com_sentry.cpp:692)
06/24/19 18:05:13.033 BROM_DLL[7356][5556]:     com_sentry::Close(): CloseHandle() Return: 1! (com_sentry.cpp:700)
06/24/19 18:05:13.033 BROM_DLL[7356][5556]:     com_sentry::Close(COM114): CloseHandle(13432) OK! (com_sentry.cpp:707)
06/24/19 18:05:13.033 BROM_DLL[7356][5556]: ERROR: FlashTool_Connect(0x00000000): fail! "S_DL_COMBO_MEMORY_SETTING_NOT_MATCHED"(5075).  (flashtool_api_internal.cpp:644)
06/24/19 18:05:13.033 BROM_DLL[7356][5556]: <<<------------------ FlashReadback(): End --------------------- (Mdebug